Thanks for your bearing with me zwhitchcox.
I’ve tested the speakers on my laptop and they are fine. Before installing balena I had the Pis running raspbian and the speakers were fine then on that OS.
I guess I have 1 major issue here. Basically neither of the Pis is appearing automatically when I run a bluetooth scan either on my Samsung J4 phone nor when I scan on a macbook. I have some bluetooth headphones and speakers and these are picked up fine.
Dmesg comes up with these errors in red:
[ 8.132137] bcm2835_mmal_vchiq: Failed to open VCHI service connection (status=-1)
[ 8.137474] bcm2835_mmal_vchiq: Failed to open VCHI service connection (status=-1)
[ 8.486143] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 8.502393] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 23 2020 02:19:54 version 7.45.206 (r725000 CY) FWID 01-88ee44ea
[ 12.076532] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled
And journalctl --no-pager -a comes up with 1 message in red:
May 13 14:57:10 f64cfbf sshd[7580]: error: Unable to load host key: /etc/ssh/hostkeys/ssh_host_dsa_key
Attached are the logs from one of my Pis.
Best Regards,
Mihailo
f64cfbf7db9d4e30398fafedee2be1a3_diagnostics_2021.05.13_14.57.58+0000.log (450.1 KB)