Compulab fitlet2 needs which balenaOS image ?

Product support
5

Good news: I have the Compulab Fitlet2 running with BalenaOS !

The way it worked was to take a USB-stick instead of the SD-card to get the Balena-image installed.

I don’t know why booting from the SD-card did not work. But booting with USB-stick works !

My steps are:

  1. create a BalenaOS device with Architecture Generic x84_64
  2. use Balena Etcher to bring the image on to a USB-stick
  3. connect the USB-Stick to the Compulab Fitlet2 - then power-ON the Compulab Fitlet2
    (4. eventually press F10 and make the BIOS boot from USB-stick if not already per default, eventually boot again having the BIOS settings set correctly)
  4. after booting with the USB-stick, wait and see until the Balena Cloud recognizes the device
1 Like