Hi, my USB to Serial Moxa UPORT 1110 device is not recognised by my resin deployment.
Assuming I can get a compiled binary, I need to understand how to set up the git repo to ensure that the module loads on all my devices.
Output of dmesg is posted below:
[ 351.024882] usb 1-1.4: new full-speed USB device number 8 using dwc_otg
[ 351.198542] usb 1-1.4: New USB device found, idVendor=110a, idProduct=1110
[ 351.198567] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 351.198580] usb 1-1.4: Product: UPort 1110
[ 351.198591] usb 1-1.4: Manufacturer: Moxa Technologies Co., Ltd.
[ 351.222251] usbcore: registered new interface driver usbserial
[ 351.222361] usbcore: registered new interface driver usbserial_generic
[ 351.222452] usbserial: USB Serial support registered for generic
[ 351.239142] usbcore: registered new interface driver ti_usb_3410_5052
[ 351.239272] usbserial: USB Serial support registered for TI USB 3410 1 port adapter
[ 351.239363] usbserial: USB Serial support registered for TI USB 5052 2 port adapter
[ 351.239501] ti_usb_3410_5052 1-1.4:1.0: TI USB 3410 1 port adapter converter detected
[ 351.239779] usb 1-1.4: Direct firmware load for moxa/moxa-1110.fw failed with error -2
[ 351.239799] usb 1-1.4: ti_download_firmware - firmware not found
[ 351.239848] ti_usb_3410_5052: probe of 1-1.4:1.0 failed with error -5