So I have been using the BalenaDash system for almost 2 years now, and may I say that it is awesome! I use it to display a sort of dashboard that I created and is web based. Recently though, when I went to go test the system with the latest release on Github, it appears that when the system tries t…

Hi @saintaardvark , Thank you for the quick reply! Unfortunately the dashboard that I am using does have some sensitive information on it that makes it so I am not able to make it public. The widget can be found here, http://halfstaff.org/widget/ , if anyone would be willing to try and recreate it an…

Hi Ryan Is it correct you are experiencing the following two issues? You have a page that loads a YouTube video and then redirects after 15 seconds, however during this redirect the renderer crashes. You have a page with the American flag widget that does not load. For issue 1 perhaps this is a …

Hey @codewithcheese , Thank you for reaching out! You are correct with the overview above of the two issues I am experiencing. For the first issue I currently have the RESIN_HOST_CONFIG_gpu_mem set to 128 as recommended, and I am mainly using a Pi 3, but I tried on a 4 also and got the same result…

Hi there, there may be a way to debug this on the client running Chrome, by enabling remote debugging capability in the Chromium container. To do this, please try: expose and publish port 9222 on the chromium container launch Chromium with the following flags: --remote-debugging-address=0.0.0.0 …

Hey @ab77 , I love the idea, but I’m having some trouble executing. Probably due to the fact that I am not very well versed with Balena as a whole. I believe I exposed the port on the device and added the flags correctly, but I am having a great deal of issues trying to forward the port to my local …

Hey, Thanks for the patience. I’ll see if I can help clear some things up: BALENA_HOST_CONFIG_gpu_mem So this setting is deciding how much of the Pi memory is being dedicated to the GPU. The value you set this to depends on a few things: how much memory the device has, and what work the device is…

Hi @phil-d-wilson , Thank you so much for your detailed response! I was able to follow your instructions, and used the Raspberry Pi 4 OS to launch the system and when using chromium, it allowed for all of the content to be displayed correctly. The one issue I am having now, which seems to be a comm…

Actually, if you don’t override it, it should be the default, see https://github.com/balenalabs/balena-dash/blob/master/kiosk/start.sh#L35

Hi @zvin , Thank you so much for that tip! I just added it to the flags that were recommended for the project and it worked! The redirect worked also, but I will keep testing to make sure. And if anything else happens I will be sure to reach out. Thank you again, you all have saved me so much furthe…

BalenaDash Keeps Crashing/Not Show all Content

Project help balenaDash

zvin September 22, 2020, 4:18pm 19

Hello,
Have you tried adding the --autoplay-policy=no-user-gesture-required switch to the chromium command line ?

Topic		Replies	Views
No Sound on BalenaDash Kiosk balenaDash balenadash , raspberrypi4	21	1492	May 19, 2021
Turn a Raspberry Pi, a Webcam and a TV into a video call device balenaDash	24	3766	June 21, 2021
balena-dash for a TV video call device on RPI3 Product support	13	1831	October 15, 2020
Balena Dash Project Won't Display Product support	35	3509	June 24, 2020
Balena Dash WPE Remote URL management Project help	5	544	August 17, 2020

BalenaDash Keeps Crashing/Not Show all Content

Related topics