Hi I’m investigating Waveshare SIM7600G-H support for Jetson Nano. As far as I can see there are two options: Option 1. install the wwan driver for the SIMCOM 7600G on Balena-Jetson yocto build. ModemManager clearly gives issue that there is no wwan. Option 2. Enable RNDIS on simcom board AT+CUSB…

Waveshare SIM7600G on Jetson board

neonlink March 14, 2023, 5:25pm 28

yes. If you want to enable the waveshare board specifically you can enable this during boot see: Problems with custom image on Rasberry pi - #19 by robertgzr

Topic		Replies	Views
Jetson Nano and Wireless Sim Card module balenaHub	11	934	May 4, 2022
Help setting up a Waveshare SIM7600E on a RPI 4 Project help network , raspberrypi4	1	361	January 12, 2023
Question about modemamanger and usage of qmi_wwan instead of simcom_wwan for sim7600 Product support	11	1472	January 17, 2022
Waveshare 7000E NB-IOT/GSM cellular modem not recognised on Balena but fine on Raspbian PiZero Product support network , raspberrypizero	2	573	January 3, 2022
Jetson Nano \| Waveshare CAN-Bus Shield Project help nvidia , jetson , nano	2	1312	March 6, 2023