I’m familiar with the Resin dashboard “Add a new device” flow for my application which allows me to download the resinOS image for my application and to create a device. And I’m familiar with the steps of flashing the USB key and provisioning the device. I see the Resin CLI Preload command which a…

I’m very much interested in this question.

Will this related question be answered first? [image] Mass Flashing SSD instead of USB Product support Hey @chrisys Thanks for the suggestions. If I clone the drives though, wouldn’t Resin think each drive is the same device in the dashboard? I was hoping that each hardr…

Seems like this is answered here: https://docs.resin.io/learn/welcome/primer/#device-provisioning TL;DR: the image is configured with a generic provisioning key for your application, which each device trades for a device-specific API key on first boot.

[image] mgreensmith: TL;DR: the image is configured with a generic provisioning key for your application, which each device trades for a device-specific API key on first boot. Before first boot when the image is flashed, it appears that the device pops up as “Not-Provisioned” with a UUID alre…

@jason10 to create multiple devices in the factory, you can take a resinOS image, use the preloader to add your latest code, then flash that .img on to hundreds of SD cards or eMMC, when the devices boot up, they will do the key exchange and provision in the application. The registration will eithe…

Thanks @shaunmulligan - after I’d gone a few steps away from the “getting started” flow of using the resin dashboard to create a new app and device using the resin dashboard to download the initial resinOS image using git or the resin cli to make changes to my app and deploy them to the device it…

Preloading images onto devices at the factory and configuring them for specific deployment

Product support

jason10 October 1, 2018, 5:30pm 5

Will this related question be answered first?

Topic		Replies	Views
Mass Flashing SSD instead of USB Product support	15	2293	November 9, 2018
Preload Pi3 with device variables without internet access Product support raspberrypi3 , network	2	566	July 22, 2019
Preloading and Pre-provisioning Project help	5	944	December 9, 2019
Resin application preload leaves device in unmanageable state Product support support , raspberrypi3	9	1018	September 28, 2017
Add a device to application Product support	5	890	July 7, 2017

Preloading images onto devices at the factory and configuring them for specific deployment

Related topics