i downloaded raspbian buster image and checksum of file is correct. but when i flash it, finally it occurs error. the error is… \.\PhysicalDrive4: Source and destination checksums do not match : blah !== blah and the result of drives checksum are different every time. my pc’s mainboard is asroc…

The raspbian image has 2 partitions: a 256MiB fat32 one starting at 4MiB; a 3.3GiB ext4 one just after; There are 359 bytes that differ between the 2 images. All differences are located between 4MiB and 261MiB, only affecting the fat32 partition. That makes sense as it is the only partition win…

Thank you very much! That explains it. It may also be a clue to why this version and no other. I will poke at that a bit. As far as why this computer and no other, it’s probably some setting having to do with indexing that I’ve overlooked. You’ve solved my immediate problem perfectly. As you s…

For what it may be worth, following the steps outlined here: https://superuser.com/a/1199824/394000 will prevent creation of that SVI folder. I can now get clean flashes of 2019-09-26 with Etcher on the Win10 computer. I could flash earlier versions, e.g. 2019-07-10 without making the changes indi…

Hello! I’m late to the party but I have also been experiencing the problems described by the OP. Several different images of Raspbian, different mSD cards, different card readers (/writers) and everything else mentioned. I did try the cards after the checksum failures, and all appear to have worked…

Hi there, We are glad the problem is solved. And thanks for pointing to that superuser thread explaining the details on how to disable SVI folder creation.

Hi @hulitolku , and welcome to the forums. Have you seen the earlier explanation posted here Checksums do not match with regards to how Windows creates the System Volume Information folder? You can disable this behavior with the instructions provided in this thread https://superuser.com/questions/11…

[image] garethtdavies: The device should work even with the checksum error. With checksumerror not working. Usbflash not loading and grub freeze(i use linux image).

@hulitolku Have you tried the fix linked above for the checksum error? It would be interesting to isolate the issue i.e. if you still have the boot error even after the checksum error has been fixed.

i done it: In Windows 10 / 8.1 Pro & Enterprise Editions, press Windows Key + R combination, type put gpedit.msc in Run dialog box and hit Enter to open the Local Group Policy Editor . Navigate here: Computer Configuration → Administrative Templates → Windows Components → Search In the ri…

Checksums do not match

balenaEtcher

hulitolku December 11, 2019, 8:23pm 48

I have same problem. i try write image on windows computer and get “checksum not match” any image and any usbflash. But on linux computer no problem, same image and same usbflash.

Topic		Replies	Views
Flash failed need help balenaEtcher	36	119724	August 26, 2023
How to Flash with MacOS 11(Big Sur)-Checksum Error balenaEtcher support , raspberrypi3	20	4169	May 10, 2021
Writer process ended unexpectedly balenaEtcher	16	1771	November 29, 2019
Checksums differ afer Etching Ubuntu img onto microSD for RPi balenaEtcher sdcard , raspberrypizero	3	1230	March 19, 2023
Flash failed Buster Minimal balenaEtcher	16	1107	February 22, 2021

Checksums do not match

Related topics