@telphan Yeah probably. Sure, the output is:
sudo ./bin/cmd.js -p -o ./workdir/ -m jetson-nano-emmc -f balena_dev.img
Consistency check done for /home/max/jetson-flash/workdir/jetson-flash-artifacts/Linux_for_Tegra
Using cached Linux_for_Tegra
Checking resin cache
Cache image check done
Extracting partition LNX from /home/max/jetson-flash/workdir/jetson-flash-artifacts/resin/img to /home/max/jetson-flash/workdir/jetson-flash-artifacts/resin
Extracting partition DTB from /home/max/jetson-flash/workdir/jetson-flash-artifacts/resin/img to /home/max/jetson-flash/workdir/jetson-flash-artifacts/resin
Extracting partition resin-boot from /home/max/jetson-flash/workdir/jetson-flash-artifacts/resin/img to /home/max/jetson-flash/workdir/jetson-flash-artifacts/resin
Extracting partition resin-rootA from /home/max/jetson-flash/workdir/jetson-flash-artifacts/resin/img to /home/max/jetson-flash/workdir/jetson-flash-artifacts/resin
Extracting partition resin-rootB from /home/max/jetson-flash/workdir/jetson-flash-artifacts/resin/img to /home/max/jetson-flash/workdir/jetson-flash-artifacts/resin
Extracting partition resin-state from /home/max/jetson-flash/workdir/jetson-flash-artifacts/resin/img to /home/max/jetson-flash/workdir/jetson-flash-artifacts/resin
Extracting partition resin-data from /home/max/jetson-flash/workdir/jetson-flash-artifacts/resin/img to /home/max/jetson-flash/workdir/jetson-flash-artifacts/resin
Successfully generated hash
###############################################################################
L4T BSP Information:
R32 , REVISION: 2.0
###############################################################################
Error: probing the target board failed.
Make sure the target board is connected through
USB port and is in recovery mode.
max@Ritter:~/jetson-flash$ cd workdir/
max@Ritter:~/jetson-flash/workdir$ ls
jetson-flash-artifacts
max@Ritter:~/jetson-flash/workdir$ cd jetson-flash-artifacts/
max@Ritter:~/jetson-flash/workdir/jetson-flash-artifacts$ sudo nano flas^C
max@Ritter:~/jetson-flash/workdir/jetson-flash-artifacts$ cd resin/
max@Ritter:~/jetson-flash/workdir/jetson-flash-artifacts/resin$ sudo nano flash.xml
max@Ritter:~/jetson-flash/workdir/jetson-flash-artifacts/resin$ cd …
max@Ritter:~/jetson-flash/workdir/jetson-flash-artifacts$ cd …
max@Ritter:~/jetson-flash/workdir$ cd …
max@Ritter:~/jetson-flash$ sudo ./bin/cmd.js -p -o ./workdir/ -m jetson-nano-emmc -f balena_dev.img
Consistency check done for /home/max/jetson-flash/workdir/jetson-flash-artifacts/Linux_for_Tegra
Using cached Linux_for_Tegra
Checking resin cache
Cache image check done
Consistency check done for /home/max/jetson-flash/workdir/jetson-flash-artifacts/resin
Using cached resin image
###############################################################################
L4T BSP Information:
R32 , REVISION: 2.0
###############################################################################
Target Board Information:
Name: jetson-nano-emmc, Board Family: t210ref, SoC: Tegra 210,
OpMode: production, Boot Authentication: ,
###############################################################################
./tegraflash.py --chip 0x21 --applet “/tmp/Linux_for_Tegra/bootloader/nvtboot_recovery.bin” --skipuid --cmd “dump eeprom boardinfo cvm.bin”
Welcome to Tegra Flash
version 1.0.0
Type ? or help for help and q or quit to exit
Use ! to execute system commands
[ 0.0011 ] Generating RCM messages
[ 0.0020 ] tegrarcm --listrcm rcm_list.xml --chip 0x21 0 --download rcm /tmp/Linux_for_Tegra/bootloader/nvtboot_recovery.bin 0 0
[ 0.0030 ] RCM 0 is saved as rcm_0.rcm
[ 0.0035 ] RCM 1 is saved as rcm_1.rcm
[ 0.0035 ] List of rcm files are saved in rcm_list.xml
[ 0.0035 ]
[ 0.0035 ] Signing RCM messages
[ 0.0044 ] tegrasign --key None --list rcm_list.xml --pubkeyhash pub_key.key
[ 0.0052 ] Assuming zero filled SBK key
[ 0.0106 ]
[ 0.0106 ] Copying signature to RCM mesages
[ 0.0116 ] tegrarcm --chip 0x21 0 --updatesig rcm_list_signed.xml
[ 0.0130 ]
[ 0.0131 ] Boot Rom communication
[ 0.0142 ] tegrarcm --chip 0x21 0 --rcm rcm_list_signed.xml --skipuid
[ 0.0151 ] RCM version 0X210001
[ 0.0592 ] Boot Rom communication completed
[ 1.0672 ]
[ 1.0675 ] dump EEPROM info
[ 1.0709 ] tegrarcm --oem platformdetails eeprom /tmp/Linux_for_Tegra/bootloader/cvm.bin
[ 1.0733 ] Applet version 00.01.0000
[ 1.0753 ] Saved platform info in /tmp/Linux_for_Tegra/bootloader/cvm.bin
[ 1.1518 ]
Board ID(3448) version(400)
creating dummy /tmp/Linux_for_Tegra/bootloader/badpage.bin
1+0 records in
1+0 records out
4096 bytes (4,1 kB, 4,0 KiB) copied, 0,000128726 s, 31,8 MB/s
copying bctfile(/tmp/Linux_for_Tegra/bootloader/t210ref/BCT/P3448_A00_4GB_Micron_4GB_lpddr4_204Mhz_P987.cfg)… done.
copying bootloader(/tmp/Linux_for_Tegra/bootloader/t210ref/cboot.bin)… done.
copying initrd(/tmp/Linux_for_Tegra/bootloader/l4t_initrd.img)… done.
populating kernel to rootfs… done.
populating initrd to rootfs… done.
populating /tmp/Linux_for_Tegra/kernel/dtb/tegra210-p3448-0002-p3449-0000-b00.dtb to rootfs… done.
Making Boot image… done.
Existing sosfile(/tmp/Linux_for_Tegra/bootloader/nvtboot_recovery.bin) reused.
copying tegraboot(/tmp/Linux_for_Tegra/bootloader/t210ref/nvtboot.bin)… done.
copying cpu_bootloader(/tmp/Linux_for_Tegra/bootloader/t210ref/cboot.bin)… done.
copying bpffile(/tmp/Linux_for_Tegra/bootloader/t210ref/sc7entry-firmware.bin)… done.
Existing badpagefile(/tmp/Linux_for_Tegra/bootloader/badpage.bin) reused.
copying wb0boot(/tmp/Linux_for_Tegra/bootloader/t210ref/warmboot.bin)… done.
Existing tosfile(/tmp/Linux_for_Tegra/bootloader/tos-mon-only.img) reused.
Existing eksfile(/tmp/Linux_for_Tegra/bootloader/eks.img) reused.
copying dtbfile(/tmp/Linux_for_Tegra/kernel/dtb/tegra210-p3448-0002-p3449-0000-b00.dtb)… done.
Warning (reg_format): “reg” property in /i2c@7000c000/temp-sensor@4c has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
Warning (avoid_default_addr_size): Relying on default #address-cells value for /i2c@7000c000/temp-sensor@4c
Warning (avoid_default_addr_size): Relying on default #size-cells value for /i2c@7000c000/temp-sensor@4c
Warning (reg_format): “reg” property in /i2c@7000c000/temp-sensor@4c has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
Warning (avoid_default_addr_size): Relying on default #address-cells value for /i2c@7000c000/temp-sensor@4c
Warning (avoid_default_addr_size): Relying on default #size-cells value for /i2c@7000c000/temp-sensor@4c
Copying nv_boot_control.conf to rootfs
sed: can’t read /tmp/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can’t read /tmp/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can’t read /tmp/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can’t read /tmp/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can’t read /tmp/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can’t read /tmp/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can’t read /tmp/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
sed: can’t read /tmp/Linux_for_Tegra/rootfs/etc/nv_boot_control.conf: Not a directory
Making system.img…
populating rootfs from /tmp/Linux_for_Tegra/rootfs … done.
Sync’ing system.img … done.
Converting RAW image to Sparse image…
---- Raw to Sparse Image Converter v1.0 ----------------------------
0: RAW: 5242880( 5 blks) ==> 28:5242892
1: SKP: 32505856( 31 blks) ==> 5242920:12
2: RAW: 1048576( 1 blks) ==> 5242932:1048588
3: SKP: 95420416( 91 blks) ==> 6291520:12
4: RAW: 1048576( 1 blks) ==> 6291532:1048588
5: SKP: 3145728( 3 blks) ==> 7340120:12
6: RAW: 1048576( 1 blks) ==> 7340132:1048588
7: SKP: 3145728( 3 blks) ==> 8388720:12
8: RAW: 23068672( 22 blks) ==> 8388732:23068684
9: SKP: 1048576( 1 blks) ==> 31457416:12
10: RAW: 9437184( 9 blks) ==> 31457428:9437196
11: SKP: 226492416( 216 blks) ==> 40894624:12
12: RAW: 1048576( 1 blks) ==> 40894636:1048588
13: SKP: 267386880( 255 blks) ==> 41943224:12
14: RAW: 1048576( 1 blks) ==> 41943236:1048588
15: SKP: 267386880( 255 blks) ==> 42991824:12
16: RAW: 1048576( 1 blks) ==> 42991836:1048588
17: SKP: 267386880( 255 blks) ==> 44040424:12
18: RAW: 1048576( 1 blks) ==> 44040436:1048588
19: SKP: 938475520( 895 blks) ==> 45089024:12
20: RAW: 1048576( 1 blks) ==> 45089036:1048588
21: SKP: 1206910976( 1151 blks) ==> 46137624:12
22: RAW: 1048576( 1 blks) ==> 46137636:1048588
23: SKP: 267386880( 255 blks) ==> 47186224:12
24: RAW: 1048576( 1 blks) ==> 47186236:1048588
25: SKP: 670040064( 639 blks) ==> 48234824:12
26: RAW: 1048576( 1 blks) ==> 48234836:1048588
27: SKP: 32505856( 31 blks) ==> 49283424:12
28: RAW: 1048576( 1 blks) ==> 49283436:1048588
29: SKP: 99614720( 95 blks) ==> 50332024:12
30: RAW: 6291456( 6 blks) ==> 50332036:6291468
31: SKP: 2006974464( 1914 blks) ==> 56623504:12
32: RAW: 1048576( 1 blks) ==> 56623516:1048588
33: SKP: 133169152( 127 blks) ==> 57672104:12
34: RAW: 1048576( 1 blks) ==> 57672116:1048588
35: SKP: 3145728( 3 blks) ==> 58720704:12
36: RAW: 1048576( 1 blks) ==> 58720716:1048588
37: SKP: 2008023040( 1915 blks) ==> 59769304:12
38: RAW: 1048576( 1 blks) ==> 59769316:1048588
39: SKP: 2146435072( 2047 blks) ==> 60817904:12
40: RAW: 1048576( 1 blks) ==> 60817916:1048588
41: SKP: 133169152( 127 blks) ==> 61866504:12
42: RAW: 1048576( 1 blks) ==> 61866516:1048588
43: SKP: 2012217344( 1919 blks) ==> 62915104:12
44: RAW: 1048576( 1 blks) ==> 62915116:1048588
45: SKP: 2146435072( 2047 blks) ==> 63963704:12
– Total: ---------------------------------------------------
46 CHUNK 15032385536( 14336 blks) ==> 63963716(61 blks)
done.
system.img built successfully.
Existing tbcfile(/tmp/Linux_for_Tegra/bootloader/nvtboot_cpu.bin) reused.
copying tbcdtbfile(/tmp/Linux_for_Tegra/kernel/dtb/tegra210-p3448-0002-p3449-0000-b00.dtb)… done.
Warning (reg_format): “reg” property in /i2c@7000c000/temp-sensor@4c has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
Warning (avoid_default_addr_size): Relying on default #address-cells value for /i2c@7000c000/temp-sensor@4c
Warning (avoid_default_addr_size): Relying on default #size-cells value for /i2c@7000c000/temp-sensor@4c
Warning (reg_format): “reg” property in /i2c@7000c000/temp-sensor@4c has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
Warning (avoid_default_addr_size): Relying on default #address-cells value for /i2c@7000c000/temp-sensor@4c
Warning (avoid_default_addr_size): Relying on default #size-cells value for /i2c@7000c000/temp-sensor@4c
copying cfgfile(/home/max/jetson-flash/workdir/jetson-flash-artifacts/resin/flash.xml) to flash.xml… done.
copying flasher(/tmp/Linux_for_Tegra/bootloader/t210ref/cboot.bin)… done.
Existing flashapp(/tmp/Linux_for_Tegra/bootloader/tegraflash.py) reused.
./tegraflash.py --bl cboot.bin --bct P3448_A00_4GB_Micron_4GB_lpddr4_204Mhz_P987.cfg --odmdata 0x94000 --bldtb tegra210-p3448-0002-p3449-0000-b00.dtb --applet nvtboot_recovery.bin --cmd “flash; reboot” --cfg flash.xml --chip 0x21 --bins “EBT cboot.bin; DTB tegra210-p3448-0002-p3449-0000-b00.dtb”
saving flash command in /tmp/Linux_for_Tegra/bootloader/flashcmd.txt
saving Windows flash command to /tmp/Linux_for_Tegra/bootloader/flash_win.bat
*** Flashing target device started. ***
Welcome to Tegra Flash
version 1.0.0
Type ? or help for help and q or quit to exit
Use ! to execute system commands
[ 0.0010 ] tegrasign --key None --getmode mode.txt
[ 0.0017 ] Assuming zero filled SBK key
[ 0.0019 ]
[ 0.0020 ] Generating RCM messages
[ 0.0029 ] tegrarcm --listrcm rcm_list.xml --chip 0x21 0 --download rcm nvtboot_recovery.bin 0 0
[ 0.0036 ] RCM 0 is saved as rcm_0.rcm
[ 0.0040 ] RCM 1 is saved as rcm_1.rcm
[ 0.0040 ] List of rcm files are saved in rcm_list.xml
[ 0.0040 ]
[ 0.0040 ] Signing RCM messages
[ 0.0047 ] tegrasign --key None --list rcm_list.xml --pubkeyhash pub_key.key
[ 0.0054 ] Assuming zero filled SBK key
[ 0.0107 ]
[ 0.0108 ] Copying signature to RCM mesages
[ 0.0118 ] tegrarcm --chip 0x21 0 --updatesig rcm_list_signed.xml
[ 0.0133 ]
[ 0.0134 ] Parsing partition layout
[ 0.0150 ] tegraparser --pt flash.xml.tmp
[ 0.0162 ]
[ 0.0162 ] Creating list of images to be signed
[ 0.0174 ] tegrahost --chip 0x21 0 --partitionlayout flash.xml.bin --list images_list.xml
[ 0.0215 ]
[ 0.0215 ] Generating signatures
[ 0.0223 ] tegrasign --key None --list images_list.xml --pubkeyhash pub_key.key
[ 0.0231 ] Assuming zero filled SBK key
[ 0.0739 ]
[ 0.0740 ] Generating br-bct
[ 0.0751 ] tegrabct --bct P3448_A00_4GB_Micron_4GB_lpddr4_204Mhz_P987.cfg --chip 0x21 0
[ 0.0758 ] Copying Sdram info from 0 to 1 set
[ 0.0769 ] Copying Sdram info from 1 to 2 set
[ 0.0769 ] Copying Sdram info from 2 to 3 set
[ 0.0769 ]
[ 0.0769 ] Updating boot device parameters
[ 0.0776 ] tegrabct --bct P3448_A00_4GB_Micron_4GB_lpddr4_204Mhz_P987.bct --chip 0x21 0 --updatedevparam flash.xml.bin
[ 0.0782 ] Warning: No sdram params
[ 0.0783 ]
[ 0.0783 ] Updating bl info
[ 0.0790 ] tegrabct --bct P3448_A00_4GB_Micron_4GB_lpddr4_204Mhz_P987.bct --chip 0x21 0 --updateblinfo flash.xml.bin --updatesig images_list_signed.xml
[ 0.0799 ]
[ 0.0800 ] Updating secondary storage information into bct
[ 0.0806 ] tegraparser --pt flash.xml.bin --chip 0x21 0 --updatecustinfo P3448_A00_4GB_Micron_4GB_lpddr4_204Mhz_P987.bct
[ 0.0814 ]
[ 0.0814 ] Updating Odmdata
[ 0.0821 ] tegrabct --bct P3448_A00_4GB_Micron_4GB_lpddr4_204Mhz_P987.bct --chip 0x21 0 --updatefields Odmdata =0x94000
[ 0.0827 ] Warning: No sdram params
[ 0.0828 ]
[ 0.0828 ] Get Signed section of bct
[ 0.0835 ] tegrabct --bct P3448_A00_4GB_Micron_4GB_lpddr4_204Mhz_P987.bct --chip 0x21 0 --listbct bct_list.xml
[ 0.0841 ]
[ 0.0841 ] Signing BCT
[ 0.0854 ] tegrasign --key None --list bct_list.xml --pubkeyhash pub_key.key
[ 0.0861 ] Assuming zero filled SBK key
[ 0.0864 ]
[ 0.0865 ] Updating BCT with signature
[ 0.0872 ] tegrabct --bct P3448_A00_4GB_Micron_4GB_lpddr4_204Mhz_P987.bct --chip 0x21 0 --updatesig bct_list_signed.xml
[ 0.0881 ]
[ 0.0881 ] Copying signatures
[ 0.0889 ] tegrahost --chip 0x21 0 --partitionlayout flash.xml.bin --updatesig images_list_signed.xml
[ 0.0926 ]
[ 0.0926 ] Updating BFS information on BCT
[ 0.0935 ] tegrabct --bct P3448_A00_4GB_Micron_4GB_lpddr4_204Mhz_P987.bct --chip 0x21 0 --updatebfsinfo flash.xml.bin
[ 0.0942 ] BFS:
[ 0.0974 ] 0: [PT ] flash.xml.bin (size=2719/65536)
[ 0.0976 ] 2: [VER] emmc_bootblob_ver.txt (size=57/65536)
[ 0.0979 ] BFS0: 65536 @ 896 SUM 1ba8b97b over 7929856 bytes
[ 0.0989 ]
[ 0.0989 ] Boot Rom communication
[ 0.0997 ] tegrarcm --chip 0x21 0 --rcm rcm_list_signed.xml
[ 0.1004 ] BootRom is not running
[ 0.1424 ]
[ 0.1425 ] Sending BCTs
[ 0.1439 ] tegrarcm --download bct P3448_A00_4GB_Micron_4GB_lpddr4_204Mhz_P987.bct
[ 0.1451 ] Applet version 00.01.0000
[ 0.1469 ] Sending bct
[ 0.1471 ] […] 100%
[ 0.3216 ]
[ 0.3248 ] tegrahost --chip 0x21 --align cboot.bin
[ 0.3279 ]
[ 0.3309 ] tegrahost --magicid EBT --appendsigheader cboot.bin cboot.bin_blheader
[ 0.3382 ]
[ 0.3422 ] tegrasign --key None --list cboot.bin_list.xml
[ 0.3452 ] Assuming zero filled SBK key
[ 0.3764 ]
[ 0.3779 ] tegrahost --updatesigheader cboot.bin_blheader.encrypt cboot.bin_blheader.hash zerosbk
[ 0.3796 ]
[ 0.3814 ] tegrahost --chip 0x21 --align tegra210-p3448-0002-p3449-0000-b00.dtb
[ 0.3823 ]
[ 0.3832 ] tegrahost --magicid DTB --appendsigheader tegra210-p3448-0002-p3449-0000-b00.dtb tegra210-p3448-0002-p3449-0000-b00.dtb_blheader
[ 0.3847 ]
[ 0.3860 ] tegrasign --key None --list tegra210-p3448-0002-p3449-0000-b00.dtb_list.xml
[ 0.3869 ] Assuming zero filled SBK key
[ 0.3929 ]
[ 0.3941 ] tegrahost --updatesigheader tegra210-p3448-0002-p3449-0000-b00.dtb_blheader.encrypt tegra210-p3448-0002-p3449-0000-b00.dtb_blheader.hash zerosbk
[ 0.3954 ]
[ 0.3958 ] Sending bootloader and pre-requisite binaries
[ 0.3968 ] tegrarcm --download ebt cboot.bin.encrypt 0 0 --download rp1 tegra210-p3448-0002-p3449-0000-b00.dtb.encrypt 0
[ 0.3976 ] Applet version 00.01.0000
[ 0.3994 ] Sending ebt
[ 0.3996 ] […] 100%
[ 0.5101 ] Sending rp1
[ 0.5137 ] […] 100%
[ 0.5639 ]
[ 0.5669 ] tegrarcm --boot recovery
[ 0.5699 ] Applet version 00.01.0000
[ 0.5731 ]
[ 0.5732 ] Retrieving storage infomation
[ 0.5766 ] tegrarcm --oem platformdetails storage storage_info.bin
[ 0.5797 ] Applet is not running on device. Continue with Bootloader
[ 1.1465 ]
[ 1.1558 ] tegradevflash --oem platformdetails storage storage_info.bin
[ 1.1570 ] Cboot version 00.01.0000
[ 1.1588 ] Saved platform info in storage_info.bin
[ 1.1599 ]
[ 1.1600 ] Flashing the device
[ 1.1615 ] tegradevflash --pt flash.xml.bin --storageinfo storage_info.bin --create
[ 1.1626 ] Cboot version 00.01.0000
[ 1.1642 ] Writing partition GPT with gpt.bin
[ 1.1646 ] […] 100%
[ 1.1688 ] Writing partition NVC with nvtboot.bin.encrypt
[ 1.5982 ] […] 100%
[ 1.6090 ] Writing partition PT with flash.xml.bin
[ 1.6332 ] […] 100%
[ 1.6371 ] Writing partition VER with emmc_bootblob_ver.txt
[ 1.6612 ] […] 100%
[ 1.6794 ] Writing partition TBC with nvtboot_cpu.bin.encrypt
[ 1.7294 ] […] 100%
[ 1.7417 ] Writing partition RP1 with tegra210-p3448-0002-p3449-0000-b00.dtb.encrypt
[ 1.7784 ] […] 100%
[ 1.7958 ] Writing partition EBT with cboot.bin.encrypt
[ 1.8343 ] […] 100%
[ 1.8638 ] Writing partition WB0 with warmboot.bin.encrypt
[ 1.9048 ] […] 100%
[ 1.9152 ] Writing partition BPF with sc7entry-firmware.bin.encrypt
[ 1.9507 ] […] 100%
[ 1.9610 ] Writing partition TOS with tos-mon-only.img.encrypt
[ 1.9963 ] […] 100%
[ 2.0091 ] Writing partition DTB with DTB.encrypt
[ 2.0446 ] […] 100%
[ 2.0716 ] Writing partition LNX with LNX.encrypt
[ 2.0998 ] […] 100%
[ 2.1359 ] Warning: EKS partition magic header mismatch!
[ 2.1735 ] Writing partition EKS with eks.img
[ 2.1750 ] […] 100%
[ 2.1842 ] Writing partition BMP with bmp.blob
[ 2.2197 ] […] 100%
[ 2.2423 ] Writing partition RP4 with rp4.blob
[ 2.2815 ] […] 100%
[ 2.2971 ] Writing partition resin-boot with resin-boot
[ 2.3343 ] […] 100%
[ 5.5512 ] Writing partition resin-rootA with resin-rootA
[ 6.6349 ] […] 100%
[ 25.8077 ] Writing partition resin-rootB with resin-rootB
[ 26.6949 ] […] 100%
[ 45.8157 ] Writing partition resin-state with resin-state
[ 46.7156 ] […] 100%
[ 47.5107 ] Writing partition resin-data with resin-data
[ 47.9755 ] […] 100%
[ 57.3757 ]
[ 57.3788 ] tegradevflash --write BCT P3448_A00_4GB_Micron_4GB_lpddr4_204Mhz_P987.bct
[ 57.3810 ] Cboot version 00.01.0000
[ 57.3827 ] Writing partition BCT with P3448_A00_4GB_Micron_4GB_lpddr4_204Mhz_P987.bct
[ 57.3837 ] […] 100%
[ 57.4897 ]
[ 57.4898 ] Flashing completed
[ 57.4901 ] Coldbooting the device
[ 57.4929 ] tegradevflash --reboot coldboot
[ 57.4959 ] Cboot version 00.01.0000
[ 57.4984 ]
*** The target t210ref has been flashed successfully. ***
Reset the board to boot from internal eMMC.
I flashed the v2.43.0+rev1 dev version from BalenaCloud. When the device is rebooted, the Nvidia logo shows up and that’s it. Any ideas?