I was trying to find a place to change the temp that is displayed from C to F for my balenasense installation. Any documentation at all on how to do that? Thanks

Okay that should be very good and its the same one I am running on my balena-sense. Thanks for the additional info, I will try reproduce this and figure if we can get a fix for this.

Much appreciated, @shaunmulligan . In the interim, I’d like to reflash the card so I can collect some data

yup no problem, I am fairly certain I should be able to reproduce this locally, so no problemo

just an update from my side, i managed to reproduce this on my rpi0, looks like there is a problem with the engine that this project seems to trigger on the rpi0. On monday I will get the engine engineers to take a look at my device and hopefully we can root cause it.

That worked perfectly, @phil-d-wilson . Many thanks for the assist! –Chris

Here’s a little more from the last crash after moving device to another locale in home: ============================================================= Welcome to balenaOS root@56ca97f:~# journalctl -b -a -f -u resin-supervisor – Logs begin at Fri 2020-01-31 15:19:42 UTC. – May 23 19:01:18 56ca97f…

I have this exact same issue with my balena sense installation. It just stops working and the supervisor is stuck in a failed to start state, even without a pi reboot or shutdown. The only way I have found to fix this is to re-image the SD Card and redeploy the application

It’s crazy. I’ve stopped rebuilding and left my instance in a failed state. As indicated above, the good folks at balena should be looking into this after the weekend. I’m reading that others, too, are experiencing same.

Hi, we’ll be looking at this issue during this week and let you know the results.

Possible to get BalenaSense to display temp in Fahrenheit?

Product support

JuanFRidano June 2, 2020, 3:08pm 77

Hi @roj,

Updates to this issue will be posted in the following thread:

thanks!

Topic		Replies	Views
balenasense with Enviro+ Product support	28	1516	December 27, 2021
Startup and Shutdown problems #balena_sense Product support	20	1612	June 3, 2020
balenalabs / balena-sense services are not starting Project help	7	912	March 20, 2020
balenaSense v2: Updated temperature, pressure, and humidity monitoring for Raspberry Pi Discussions	43	1668	November 16, 2024
Balena-sense no data in dashboard Project help	18	1430	December 2, 2019

Possible to get BalenaSense to display temp in Fahrenheit?

Related topics