[0000.332] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses. [0000.341] I> MB1 (prd-version: 1.5.1.3-t194-41334769-d2a21c57) [0000.346] I> Boot-mode: Coldboot [0000.349] I> Chip revision : A02P [0000.352] I> Bootrom patch version : 15 (correctly patched) [0000.357] I> ATE fuse revision : 0x200 [0000.361] I> Ram repair fuse : 0x0 [0000.364] I> Ram Code : 0x2 [0000.366] I> rst_source : 0x0 [0000.369] I> rst_level : 0x0 [0000.373] I> Boot-device: eMMC [0000.388] I> sdmmc DDR50 mode [0000.392] W> No valid slot number is found in scratch register [0000.397] W> Return default slot: _a [0000.401] I> Active Boot chain : 0 [0000.404] I> Boot-device: eMMC [0000.407] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0000.415] I> Temperature = 29000 [0000.418] W> Skipping boost for clk: BPMP_CPU_NIC [0000.423] W> Skipping boost for clk: BPMP_APB [0000.427] W> Skipping boost for clk: AXI_CBB [0000.430] W> Skipping boost for clk: AON_CPU_NIC [0000.435] W> Skipping boost for clk: CAN1 [0000.438] W> Skipping boost for clk: CAN2 [0000.443] I> Boot-device: eMMC [0000.446] I> Boot-device: eMMC [0000.455] I> Sdmmc: HS400 mode enabled [0000.460] I> ECC region[0]: Start:0x0, End:0x0 [0000.464] I> ECC region[1]: Start:0x0, End:0x0 [0000.468] I> ECC region[2]: Start:0x0, End:0x0 [0000.472] I> ECC region[3]: Start:0x0, End:0x0 [0000.476] I> ECC region[4]: Start:0x0, End:0x0 [0000.480] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.486] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.490] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.495] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.499] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.505] E> FAILED: Thermal config [0000.512] E> FAILED: MEMIO rail config [0000.531] I> Boot-device: eMMC [0000.540] I> sdmmc bdev is already initialized [0000.611] I> MB1 done ����main enter SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start Scheduler. in late init �� [0000.619] I> Welcome to MB2(TBoot-BPMP) (version: 00.00.2018.32-mobile-389501e9) [0000.620] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.621] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.621] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.627] W> device prod register failed [0000.631] I> Boot-device: eMMC [0000.634] I> Boot_device: SDMMC_BOOT instance: 3 [0000.640] I> sdmmc-3 params source = boot args [0000.642] I> sdmmc bdev is already initialized [0000.647] I> sdmmc-3 params source = boot args [0000.655] I> Found 15 partitions in SDMMC_BOOT (instance 3) [0000.662] I> Found 41 partitions in SDMMC_USER (instance 3) [0000.663] W> No valid slot number is found in scratch register [0000.668] W> Return default slot: _a [0000.671] I> Active Boot chain : 0 [0000.675] I> parsing oem signed section of bpmp-fw header done [0000.680] I> bpmp-fw binary init read from storage [0000.685] I> oem authentication of bpmp-fw header done [0000.691] I> bpmp-fw binary done read from storage [0000.694] I> bpmp-fw: Authentication init Done [0000.699] I> parsing oem signed section of cpubl header done [0000.704] I> cpubl binary init read from storage [0000.709] I> bpmp-fw: Authentication Finalize Done [0000.713] I> oem authentication of cpubl header done [0000.718] I> cpubl binary done read from storage [0000.722] I> cpubl: Authentication init Done [0000.727] I> parsing oem signed section of rce header done [0000.732] I> rce binary init read from storage [0000.736] I> Relocating BR-BCT [0000.739] I> cpubl: Authentication Finalize Done [0000.744] I> oem authentication of rce header done [0000.748] I> rce binary done read from storage [0000.752] I> rce: Authentication init Done [0000.757] I> parsing oem signed section of ape header done [0000.762] I> ape binary init read from storage [0000.766] I> rce: Authentication Finalize Done [0000.771] I> oem authentication of ape header done [0000.775] I> ape binary done read from storage [0000.779] I> ape: Authentication init Done [0000.784] I> parsing oem signed section of tos header done [0000.789] I> tos binary init read from storage [0000.793] I> ape: Authentication Finalize Done [0000.798] I> oem authentication of tos header done [0000.802] I> tos binary done read from storage [0000.806] I> tos: Authentication init Done [0000.810] I> parsing oem signed section of bpmp-fw-dtb header done [0000.816] I> bpmp-fw-dtb binary init read from storage [0000.821] I> tos: Authentication Finalize Done [0000.827] I> oem authentication of bpmp-fw-dtb header done [0000.833] I> bpmp-fw-dtb binary done read from storage [0000.836] I> bpmp-fw-dtb: Authentication init Done [0000.840] I> parsing oem signed section of cpubl-dtb header done [0000.846] I> cpubl-dtb binary init read from storage [0000.851] I> bpmp-fw-dtb: Authentication Finalize Done [0000.888] I> oem authentication of cpubl-dtb header done [0000.889] I> cpubl-dtb binary done read from storage [0000.890] I> cpubl-dtb: Authentication init Done [0000.891] I> parsing oem signed section of eks header done [0000.892] I> eks binary init read from storage [0000.893] I> cpubl-dtb: Authentication Finalize Done [0000.893] I> oem authentication of eks header done [0000.897] I> eks binary done read from storage [0000.901] I> eks: Authentication init Done [0000.905] I> eks: Authentication Finalize Done [0000.909] I> EKB detected (length: 0x410) @ VA:0x5270a400 ��NOTICE: BL31: v1.3(release):de895fd9e NOTICE: BL31: Built : 12:15:31, Oct 16 2020 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 40: hwkey-agent is running!! hwkey-agent: 182: key_mgnt_processing ....... hwkey-agent: 157: Init hweky-agent services!! platform_bootstrap_epilog: trusty bootstrap complete �� welcome to lk calling constructors initializing heap creating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag is 57f8a77779f848bf2ecf21dabee5645f tag_show initialized dt initialized mail initialized chipid initialized fuse initialized sku initialized speedo initialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialized vmon_populate_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized fmon_mrq initialized reset initialized nvhs initialized 392 clocks registered WARNING: pll_c4 has no dyn ramp clk_mrq_init: mrq handler registered clk initialized nvlink initialized io_dpd initialized io_dpd initialized thermal initialized i2c5 controller initialized initialized i2c mrq handling i2c initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized pg_late initialized strap initialized tag initialized emc initialized clk_dt initialized avfs_ccplex_platform initialized tj_max: dt node not found tj_init initialized uphy_mrq_init: mrq handler registered uphy_dt initialized uphy initialized safereg_init: period 80 ms ec_late initialized mrq initialized �� [0001.413] I> Welcome to Cboot ��fmon_post initialized ��[0001.413] I> Cboot Version: t194-aad9d75e [0001.413] I> CPU-BL Params @ 0xf2820000 [0001.414] I> 0) Base:0x00000000 Size:0x00000000 [0001.417] I> 1) Base:0xf1100000 Size:0x00100000 [0001.421] I> 2) Base:0xf2000000 Size:0x00200000 [0001.426] I> 3) Base:0xf1200000 Size:0x00200000 ��clk_set_parent failed for clk can1, parent pll_aon (-22) clk_set_parent failed for clk can2, parent pll_aon (-22) clk_set_parent failed for clk dmic5, parent pll_aon (-22) clk_set_parent failed for clk i2c2, parent pll_aon (-22) clk_set_parent failed for clk i2c8, parent pll_aon (-22) clk_set_parent failed for clk spi2, parent pll_aon (-22) clk_set_parent failed for clk pwm4, parent pll_aon (-22) clk_dt_late initialized machine_check initialized pm_post initialized dbells initialized avfs_clk_platform_post initialized dmce initialized cvc initialized ccplex_avfs_hw_init: nafll_cluster0: not monitored ccplex_avfs_hw_init: nafll_cluster1: not monitored ccplex_avfs_hw_init: nafll_cluster2: not monitored ccplex_avfs_hw_init: nafll_cluster3: not monitored avfs_clk_mach_post initialized regulator_post initialized rm initialized sc7_diag initialized thermal_test initialized serial_late initialized clk_post initialized clk_dt_post initialized mc_reg initialized pg_post initialized dyn_modules initialized sku_debugfs initialized speedo_debugfs initialized adc_debugfs initialized clk_debugfs initialized ��[0001.430] I> 4) Base:0xf1000000 Size:0x00100000 [0001.535] I> 5) Base:0xf0f00000 Size:0x00100000 [0001.540] I> 6) Base:0xf3800000 Size:0x00400000 [0001.544] I> 7) Base:0xf1c00000 Size:0x00400000 [0001.549] I> 8) Base:0xf0e00000 Size:0x00100000 [0001.553] I> 9) Base:0xf0d00000 Size:0x00100000 [0001.558] I> 10) Base:0xf3000000 Size:0x00800000 [0001.562] I> 11) Base:0x40000000 Size:0x00040000 [0001.567] I> 12) Base:0xf0c00000 Size:0x00100000 ��emc_debugfs initialized dvs_debugfs initialized fmon_debugfs initialized vmon_debugfs initialized pg_debugfs initialized profile_fs initialized debugfs_cons initialized mail_fs initialized profile initialized cvc_debugfs initialized dmce_debugfs initialized ec_debugfs initialized rm_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs initialized debugfs_mrq initialized debug_mrq initialized debug_safereg initialized initializing target calling apps_init() starting app shell entering main console loop ] ��[0001.571] I> 13) Base:0x40046000 Size:0x00002000 [0001.626] I> 14) Base:0x40048000 Size:0x00002000 [0001.630] I> 15) Base:0xac000000 Size:0x00004000 [0001.635] I> 16) Base:0x4004a000 Size:0x00002000 [0001.639] I> 17) Base:0xf0b00000 Size:0x00100000 [0001.644] I> 18) Base:0x4004c000 Size:0x00002000 [0001.648] I> 19) Base:0xf2200000 Size:0x00600000 [0001.653] I> 20) Base:0x4004e000 Size:0x00002000 [0001.657] I> 21) Base:0xf09d0000 Size:0x0000c000 [0001.662] I> 22) Base:0x00000000 Size:0x00000000 [0001.666] I> 23) Base:0xf09e0000 Size:0x00020000 [0001.670] I> 24) Base:0xf6000000 Size:0x02000000 [0001.675] I> 25) Base:0x40050000 Size:0x00002000 [0001.679] I> 26) Base:0x40040000 Size:0x00006000 [0001.684] I> 27) Base:0xf1800000 Size:0x00400000 [0001.688] I> 28) Base:0xf4c00000 Size:0x01400000 [0001.693] I> 29) Base:0xf1400000 Size:0x00400000 [0001.697] I> 30) Base:0xf0a00000 Size:0x00100000 [0001.702] I> 31) Base:0x00000000 Size:0x00000000 [0001.706] I> 32) Base:0xf8000000 Size:0x08000000 [0001.711] I> 33) Base:0x00000000 Size:0x00000000 [0001.715] I> 34) Base:0xf3c00000 Size:0x01000000 [0001.720] I> 35) Base:0xab000000 Size:0x01000000 [0001.724] I> 36) Base:0xa0000000 Size:0x0b000000 [0001.728] I> 37) Base:0xf2800000 Size:0x00800000 [0001.733] I> 38) Base:0x80000000 Size:0x20000000 [0001.737] I> 39) Base:0xb0000000 Size:0x08000000 [0001.742] I> 40) Base:0x00000000 Size:0x00000000 [0001.746] I> 41) Base:0x00000000 Size:0x00000000 [0001.751] I> 42) Base:0x00000000 Size:0x00000000 [0001.755] I> 43) Base:0x00000000 Size:0x00000000 [0001.760] I> 44) Base:0x00000000 Size:0x00000000 [0001.764] I> 45) Base:0x00000000 Size:0x00000000 [0001.769] GIC-SPI Target CPU: 0 [0001.772] Interrupts Init done [0001.775] calling constructors [0001.777] initializing heap [0001.780] I> Heap: [0xa0691568 ... 0xab000000] [0001.784] initializing threads [0001.787] initializing timers [0001.790] creating bootstrap completion thread [0001.794] top of bootstrap2() [0001.797] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0001.802] initializing platform [0001.805] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0001.810] W> device prod register failed [0001.814] I> Bl_dtb @0xaaf00000 [0001.821] W> "plugin-manager" doesn't exist, creating [0001.822] W> "ids" doesn't exist, creating [0001.826] W> "connection" doesn't exist, creating [0001.830] W> "configs" doesn't exist, creating [0001.839] I> Find /i2c@3160000's alias i2c0 [0001.839] I> Reading eeprom i2c=0 address=0x50 [0001.868] I> Device at /i2c@3160000:0x50 [0001.869] I> Reading eeprom i2c=0 address=0x56 [0001.893] I> Device at /i2c@3160000:0x56 [0001.894] I> Find /i2c@3180000's alias i2c2 [0001.895] I> Reading eeprom i2c=2 address=0x54 [0001.896] E> I2C: slave not found in slaves. [0001.897] E> I2C: Could not write 0 bytes to slave: 0x00a8 with repeat start true. [0001.898] E> I2C_DEV: Failed to send register address 0x00000000. [0001.898] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa8 at 0x00000000 via instance 2. [0001.907] E> eeprom: Failed to read I2C slave device [0001.912] I> Eeprom read failed 0x3526070d [0001.916] I> Reading eeprom i2c=2 address=0x57 [0001.920] E> I2C: slave not found in slaves. [0001.924] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.932] E> I2C_DEV: Failed to send register address 0x00000000. [0001.938] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 2. [0001.947] E> eeprom: Failed to read I2C slave device [0001.952] I> Eeprom read failed 0x3526070d [0001.956] I> Reading eeprom i2c=2 address=0x52 [0001.960] E> I2C: slave not found in slaves. [0001.964] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.972] E> I2C_DEV: Failed to send register address 0x00000000. [0001.978] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 2. [0001.987] E> eeprom: Failed to read I2C slave device [0001.992] I> Eeprom read failed 0x3526070d [0001.997] I> Find /i2c@c240000's alias i2c1 [0002.000] I> Reading eeprom i2c=1 address=0x52 [0002.006] E> I2C: slave not found in slaves. [0002.008] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0002.016] E> I2C_DEV: Failed to send register address 0x00000000. [0002.022] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0002.031] E> eeprom: Retry to read I2C slave device. [0002.036] E> I2C: slave not found in slaves. [0002.040] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0002.048] E> I2C_DEV: Failed to send register address 0x00000000. [0002.054] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0002.063] E> eeprom: Failed to read I2C slave device [0002.068] I> Eeprom read failed 0x3526070d [0002.072] I> Reading eeprom i2c=1 address=0x50 [0002.076] E> I2C: slave not found in slaves. [0002.080] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0002.088] E> I2C_DEV: Failed to send register address 0x00000000. [0002.094] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0002.103] E> eeprom: Retry to read I2C slave device. [0002.108] E> I2C: slave not found in slaves. [0002.112] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0002.120] E> I2C_DEV: Failed to send register address 0x00000000. [0002.125] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0002.135] E> eeprom: Failed to read I2C slave device [0002.140] I> Eeprom read failed 0x3526070d [0002.144] I> create_pm_ids: id: 2888-0004-400-L, len: 15 [0002.149] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.160] I> create_pm_ids: id: 2822-0000-700-K, len: 15 [0002.165] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.176] I> Adding plugin-manager/ids/2888-0004-400=/i2c@3160000:module@0x50 [0002.184] W> "i2c@3160000" doesn't exist, creating [0002.188] W> "module@0x50" doesn't exist, creating [0002.193] I> Adding plugin-manager/ids/2822-0000-700=/i2c@3160000:module@0x56 [0002.200] W> "module@0x56" doesn't exist, creating [0002.206] I> Adding plugin-manager/cvm [0002.208] W> "chip-id" doesn't exist, creating [0002.212] I> Adding plugin-manager/chip-id/A02P [0002.216] I> Plugin-manager override starting [0002.222] I> node /plugin-manager/fragement-tegra-wdt-en matches [0002.231] I> node /plugin-manager/fragement-soft-wdt matches [0002.239] I> node /plugin-manager/fragment-pcie-c5-rp matches [0002.244] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0002.253] I> Disable plugin-manager status in FDT [0002.253] I> Plugin-manager override finished successfully [0002.253] I> gpio framework initialized [0002.259] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0002.266] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0002.272] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46 [0002.280] E> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.287] E> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.294] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.300] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44 [0002.307] E> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.315] E> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.322] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.329] I> fixed regulator driver initialized [0002.340] I> register 'maxim' power off handle [0002.341] I> virtual i2c enabled [0002.341] I> registered 'maxim,max20024' pmic [0002.344] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0002.351] I> Boot-device: eMMC [0002.353] I> Boot_device: SDMMC_BOOT instance: 3 [0002.362] I> sdmmc-3 params source = boot args [0002.362] I> create_pm_ids: id: 2888-0004-400-L, len: 15 [0002.367] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.378] I> create_pm_ids: id: 2822-0000-700-K, len: 15 [0002.384] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.395] I> sdmmc bdev is already initialized [0002.399] I> sdmmc-3 params source = boot args [0002.430] I> Found 15 partitions in SDMMC_BOOT (instance 3) [0002.442] I> Found 41 partitions in SDMMC_USER (instance 3) [0002.453] I> enabling 'vdd-hdmi-5v0' regulator [0002.458] I> regulator 'vdd-hdmi-5v0' already enabled [0002.459] I> hdmi cable connected [0002.461] W> set volts not configured for 'vdd-1v0' [0002.463] W> set volts not configured for 'vdd-1v8-hs' [0002.468] E> invalid display type [0002.472] E> invalid display type [0002.474] E> cannot find any other nvdisp nodes [0002.490] I> edid read success [0002.503] I> edid read success [0002.503] I> width = 640, height = 480, frequency = 25174825 [0002.503] I> width = 640, height = 480, frequency = 25174825 [0002.504] I> width = 1920, height = 1080, frequency = 148500000 [0002.504] I> width = 1920, height = 1080, frequency = 148500000 [0002.505] I> width = 640, height = 480, frequency = 25174825 [0002.509] I> width = 720, height = 480, frequency = 26973026 [0002.514] I> width = 720, height = 480, frequency = 26973026 [0002.520] I> width = 1280, height = 720, frequency = 74175824 [0002.525] I> width = 1920, height = 1080, frequency = 148351648 [0002.531] I> width = 720, height = 576, frequency = 26973026 [0002.536] I> width = 720, height = 576, frequency = 26973026 [0002.542] I> width = 1280, height = 720, frequency = 74175824 [0002.548] I> width = 1920, height = 1080, frequency = 148351648 [0002.553] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0002.563] I> hdmi_enable, starting HDMI initialisation [0002.568] I> hdmi_enable, HDMI initialisation complete [0002.578] I> Load in CBoot Boot Options partition and parse it [0002.585] E> Error -9 when finding node with path /boot-configuration [0002.585] E> tegrabl_cbo_parse_info: "boot-configuration" not found in CBO file. [0002.589] I> Hit any key to stop autoboot: 4 3 2 1 [0004.597] initializing target [0004.597] calling apps_init() [0004.598] starting app kernel_boot_app [0004.605] E> tegrabl_blob_init: BMP partition does not have valid Blob [0004.606] E> tegrabl_load_bmp_blob: BMP blob initialization failed [0004.606] W> Loading bmp blob to memory failed [0004.607] I> Kernel type = Normal [0004.607] I> Loading kernel-bootctrl from partition [0004.607] E> Cannot find partition kernel-bootctrl [0004.610] E> Cannot open partition kernel-bootctrl [0004.615] W> tegrabl_get_kernel_bootctrl: failed to read primary bootctrl data [0004.622] I> Loading kernel-bootctrl_b from partition [0004.627] E> Cannot find partition kernel-bootctrl_b [0004.632] E> Cannot open partition kernel-bootctrl_b [0004.636] W> tegrabl_get_kernel_bootctrl: failed to read recovery bootctrl data [0004.644] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0004.651] I> ########## SD boot ########## [0004.655] I> No sdcard [0004.657] I> -0 params source = [0004.660] E> Blockdev open: exit error [0004.663] E> SD boot failed, err: 724238353 [0004.667] I> ########## USB boot ########## [0004.676] W> No valid slot number is found in scratch register [0004.677] W> Return default slot: _a [0004.693] I> USB Firmware Version: 60.06 release [0004.748] I> regulator of usb2-0 already enabled [0004.755] I> regulator of usb2-1 already enabled [0004.761] I> regulator of usb2-2 already enabled [0004.770] I> enabling 'vdd-5v-sata' regulator [0005.778] E> failed to initialize xhci controller [0005.779] E> Error in init of XUSB host driver, err: 79790026 [0005.779] E> Failed to initialize device 5-0 [0005.780] E> USB boot failed, err: 2037973030 [0005.780] I> ########## Fixed storage boot ########## [0005.780] I> Already published: 00010003 [0005.781] I> Look for boot partition [0005.784] I> Fallback: assuming 0th partition is boot partition [0005.790] I> Detect filesystem [0005.799] I> fs_detect:173: Unsupported or no filesystem present [0005.799] E> Invalid fm_handle (0xa06926b8) or mount path passed [0005.804] I> Fallback: Load binaries from partition [0005.809] W> No valid slot number is found in scratch register [0005.815] W> Return default slot: _a [0005.818] I> A/B: bin_type (37) slot 0 [0005.822] I> Loading kernel from partition [0005.826] I> Loading partition kernel at 0xa0eb0000 from device(0x1) [0006.230] I> Validate kernel ... [0006.231] I> T19x: Authenticate kernel (bin_type: 37), max size 0x5000000 [0006.867] W> No valid slot number is found in scratch register [0006.868] W> Return default slot: _a [0006.868] I> A/B: bin_type (38) slot 0 [0006.868] I> Loading kernel-dtb from partition [0006.869] I> Loading partition kernel-dtb at 0x90000000 from device(0x1) [0006.876] I> Validate kernel-dtb ... [0006.876] I> T19x: Authenticate kernel-dtb (bin_type: 38), max size 0x400000 [0006.883] I> Checking boot.img header magic ... [0006.883] I> [OK] [0006.883] I> Kernel hdr @0xa0eb0000 [0006.885] I> Kernel dtb @0x90000000 [0006.889] I> decompressor handler not found [0006.893] I> Copying kernel image (40364040 bytes) from 0xa0eb0800 to 0x80080000 ... [0006.909] I> Done [0006.910] I> Move ramdisk (len: 0) from 0xa352f800 to 0x91000000 [0006.911] I> Updated bpmp info to DTB [0006.912] I> Ramdisk: Base: 0x91000000; Size: 0x0 [0006.916] I> Updated initrd info to DTB [0006.920] W> WARN: Fail to override "console=none" in commandline [0006.926] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0006.933] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0006.940] W> No valid slot number is found in scratch register [0006.946] W> Return default slot: _a [0006.949] I> Active slot suffix: [0006.952] I> add_boot_slot_suffix: slot_suffix = [0006.957] I> Linux Cmdline: console=ttyTCU0,115200 root=LABEL=resin-rootA ro rootwait rootfstype=ext4 console=ttyTCU0,115200 console=tty0 fb [0007.001] I> Updated bootarg info to DTB [0007.005] W> MAC addr invalid! [0007.008] E> Failed to get WIFI MAC address [0007.012] W> MAC addr invalid! [0007.015] E> Failed to get Bluetooth MAC address [0007.019] I> eeprom_get_mac_addr: MAC (type: 2): 48:b0:2d:3a:7d:e2 [0007.026] W> "plugin-manager" doesn't exist, creating [0007.030] I> Adding /chosen/plugin-manager/cvm [0007.034] W> "chip-id" doesn't exist, creating [0007.039] I> Adding /chosen/plugin-manager/chip-id [0007.043] W> "configs" doesn't exist, creating [0007.048] I> Adding /chosen/plugin-manager/configs [0007.052] W> "ids" doesn't exist, creating [0007.056] I> Adding /chosen/plugin-manager/ids [0007.061] W> "odm-data" doesn't exist, creating [0007.065] I> Adding /chosen/plugin-manager/odm-data [0007.072] W> "memory" doesn't exist, creating [0007.074] I> [0] START: 0x80000000, END: 0xac000000 [0007.078] I> [1] START: 0xac004000, END: 0xf09d0000 [0007.083] I> [2] START: 0xf09dc000, END: 0xf09e0000 [0007.088] I> dram_block larger than 80000000 [0007.092] I> [3] START: 0x100000000, END: 0x880000000 [0007.097] I> added [base:0x80000000, size:0x2c000000] to /memory [0007.103] I> added [base:0xac200000, size:0x44600000] to /memory [0007.109] I> added [base:0x100000000, size:0x780000000] to /memory [0007.116] I> Updated memory info to DTB [0007.119] E> add_disp_param: failed to get display params for du=1 [0007.125] W> "reset" doesn't exist, creating [0007.129] I> NVG: Logical CPU: 0; MPIDR: 0x80000000 [0007.133] I> NVG: Logical CPU: 1; MPIDR: 0x80000001 [0007.138] I> NVG: Logical CPU: 2; MPIDR: 0x80000100 [0007.143] I> NVG: Logical CPU: 3; MPIDR: 0x80000101 [0007.147] I> NVG: Logical CPU: 4; MPIDR: 0x80000200 [0007.152] I> NVG: Logical CPU: 5; MPIDR: 0x80000201 [0007.157] I> NVG: Logical CPU: 6; MPIDR: 0x80000300 [0007.162] I> NVG: Logical CPU: 7; MPIDR: 0x80000301 [0007.167] W> "misc-data" doesn't exist, creating [0007.171] I> Boot-device: eMMC [0007.174] I> Add boot-sdmmc to plugin-manager/misc-data [0007.179] I> Add storage-sdmmc to plugin-manager/misc-data [0007.184] W> Unknown storage device [0007.188] I> Add serial number:1560121030663 as DT property [0007.194] I> Plugin-manager override starting [0007.198] I> node /plugin-manager/fragement-tegra-wdt-en matches [0007.205] I> node /plugin-manager/fragement-soft-wdt matches [0007.212] I> node /plugin-manager/fragment-pcie-c5-rp matches [0007.216] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0007.228] I> Disable plugin-manager status in FDT [0007.228] I> Plugin-manager override finished successfully [0007.230] I> tegrabl_load_kernel_and_dtb: Done [0007.236] E> bmp blob is not loaded and initialized [0007.239] E> tegrabl_display_show_image, du 0 failed to read bmp from blob [0007.246] W> Boot logo display failed... [0007.250] I> Kernel EP: 0x80080000, DTB: 0x90000000 [ 1.728185] ERROR: could not get clock /spi@c260000:osc(2) [ 1.728185] ERROR: could not get clock /spi@c260000:osc(2) [ 1.728960] ERROR: could not get clock /spi@c260000:osc(2) [ 1.728960] ERROR: could not get clock /spi@c260000:osc(2) ��WARNING: pll_d3 has no dyn ramp ��Starting version 244.3+ [ 17.878898] blk_update_request: I/O error, dev mmcblk0rpmb, sector 0 [ 17.984907] blk_update_request: I/O error, dev mmcblk0rpmb, sector 0 [ 47.277588] cgroup: cgroup2: unknown option "nsdelegate" [ 49.887700] ar0234 30-0043: Failed writing register ret = -121! [ 49.888010] ar0234 30-0043: serdes_write_16b_reg:write reg error: reg = 0x10,val = 0x21 [ 49.888330] ar0234 30-0043: serdes_config_init(824): Failed [ 49.888500] ar0234 30-0043: serdes_config_init_failed [ 49.999072] ar0234 30-0044: Failed writing register ret = -121! [ 49.999264] ar0234 30-0044: serdes_read_16b_reg:write reg error:reg=0x0 [ 49.999711] ar0234 30-0044: Failed writing register ret = -121! [ 49.999842] ar0234 30-0044: serdes_write_16b_reg:write reg error: reg = 0x10,val = 0x21 [ 49.999999] ar0234 30-0044: serdes_config_init(901): Failed [ 50.106743] ar0234 30-0044: serdes_config_init_failed [ 57.813286] ar0234 31-0043: ISP Initialized !! [* ] A start job is running for udev Wai��…Device Initialization (10s / 3min) [** ] A start job is running for udev Wai��…Device Initialization (10s / 3min) [ 58.379244] ar0234 31-0044: Failed writing register ret = -121! [ 58.379572] ar0234 31-0044: serdes_read_16b_reg:write reg error:reg=0x0 [ 58.380254] ar0234 31-0044: Failed writing register ret = -121! [ 58.380438] ar0234 31-0044: serdes_write_16b_reg:write reg error: reg = 0x10,val = 0x21 [ 58.380700] ar0234 31-0044: serdes_config_init(901): Failed [ 58.486741] ar0234 31-0044: serdes_config_init_failed [ 58.703706] ar0234 32-0043: Failed writing register ret = -121! [ 58.704186] ar0234 32-0043: serdes_write_16b_reg:write reg error: reg = 0x10,val = 0x21 [ 58.704658] ar0234 32-0043: serdes_config_init(824): Failed [ 58.705046] ar0234 32-0043: serdes_config_init_failed [ 58.816168] ar0234 32-0044: Failed writing register ret = -121! [ 58.816785] ar0234 32-0044: serdes_read_16b_reg:write reg error:reg=0x0 [ 58.818369] ar0234 32-0044: Failed writing register ret = -121! [ 58.819063] ar0234 32-0044: serdes_write_16b_reg:write reg error: reg = 0x10,val = 0x21 [*** ] A start job is running for udev Wai��…Device Initialization (11s / 3min) [ OK ] Started udev Wait for Complete Device Initialization. Activating swap Enable com��…d swap in memory using zram... Starting Show Plymouth Boot Screen... [ OK ] Started Hardware RNG Entropy Gatherer Daemon. [ OK ] Reached target System Initialization. [ OK ] Started Config.json path watch. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Started Balena supervisor updater timer. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.