[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.140-tegra (buildbrain@mobile-u64-3531) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Wed Mar 13 00:32:22 PDT 2019 [ 0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 7ee00000 [ 0.000000] OF: fdt: - 100000000 , 7f200000 [ 0.000000] Found tegra_fbmem: 00800000@92cb6000 [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000 [ 0.000000] On node 0 totalpages: 1039872 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 519168 pages, LIFO batch:31 [ 0.000000] Normal zone: 8136 pages used for memmap [ 0.000000] Normal zone: 520704 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 23 pages/cpu @ffffffc0fefd2000 s53400 r8192 d32616 u94208 [ 0.000000] pcpu-alloc: s53400 r8192 d32616 u94208 alloc=23*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544 [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1125 core_edp_ma=4000 tegra_fbmem=0x800000@0x92cb6000 is_hdmi_initialised=1 root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 rootfstype=ext4 root=/dev/mmcblk0p1 rw rootwait [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 131072 bytes [ 0.000000] early log buf free: 29384(89%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3567872K/4159488K available (15166K kernel code, 2914K rwdata, 6616K rodata, 8512K init, 605K bss, 116480K reserved, 475136K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f50000 ( 15168 KB) [ 0.000000] .rodata : 0xffffff8008f50000 - 0xffffff80095d0000 ( 6656 KB) [ 0.000000] .init : 0xffffff80095d0000 - 0xffffff8009e20000 ( 8512 KB) [ 0.000000] .data : 0xffffff8009e20000 - 0xffffff800a0f8808 ( 2915 KB) [ 0.000000] .bss : 0xffffff800a0f8808 - 0xffffff800a18fe3c ( 606 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [ 0.000000] t210 clock and reset probe [ 0.000000] boot misc1 0x90000000: expected 0x10000000 [ 0.000000] (comparison mask = 0xf8000000) [ 0.000000] boot misc2 0x0: expected 0xf6e0f620 [ 0.000000] (comparison mask = 0xffffffff) [ 0.000000] boot misc3 0xf5c1: expected 0x10000 [ 0.000000] (comparison mask = 0xffffffff) [ 0.000000] PLL_D2 already enabled. Postponing set full defaults [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.001502] Console: colour dummy device 80x25 [ 0.002439] console [tty0] enabled [ 0.002463] kmemleak: Kernel memory leak detector disabled [ 0.002492] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.002520] pid_max: default: 32768 minimum: 301 [ 0.002986] Security Framework initialized [ 0.003220] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003240] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.004496] ftrace: allocating 46802 entries in 183 pages [ 0.177577] sched-energy: CPU device node has no sched-energy-costs [ 0.177612] ASID allocator initialised with 65536 entries [ 0.215715] tegra-id: chipid=22117. [ 0.215759] tegra-id: opt_subrevision=0. [ 0.215788] Tegra Speedo/IDDQ fuse revision 4 [ 0.215804] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2 [ 0.215821] Tegra: CPU Process ID 0, SoC Process ID 0, GPU Process ID 0 [ 0.215836] Tegra: CPU Speedo Value 2047, SoC Speedo Value 1944, GPU Speedo Value 2053 [ 0.215857] Tegra: CPU IDDQ Value 2064, SoC IDDQ Value 2400, GPU IDDQ Value 2855 [ 0.215892] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 0 [ 0.215918] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-a02.dts [ 0.215952] DTB Build time: Mar 15 2019 09:52:07 [ 0.265093] CPU1: Booted secondary processor [411fd071] [ 0.296975] CPU2: Booted secondary processor [411fd071] [ 0.328946] CPU3: Booted secondary processor [411fd071] [ 0.329040] Brought up 4 CPUs [ 0.329102] SMP: Total of 4 processors activated. [ 0.329120] CPU features: detected feature: 32-bit EL0 Support [ 0.329402] CPU: All CPU(s) started at EL2 [ 0.329432] alternatives: patching kernel code [ 0.337722] devtmpfs: initialized [ 0.372588] Initilizing CustomIPI irq domain [ 0.373018] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.373061] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.384495] pinctrl core: initialized pinctrl subsystem [ 0.385237] OS set in device tree is not L4T. [ 0.385694] regulator-dummy: no parameters [ 0.385991] Initializing plugin-manager [ 0.386161] Plugin module not found [ 0.386378] node /plugin-manager/fragement@0 match with board >=3448-0000-100 [ 0.386945] node /plugin-manager/fragment@1 match with board >=3448-0000-101 [ 0.387710] node /plugin-manager/fragment@5 match with board 3449-0000-200 [ 0.391091] NET: Registered protocol family 16 [ 0.392463] pstore: using zlib compression [ 0.393192] console [pstore-1] enabled [ 0.393209] pstore: Registered ramoops as persistent store backend [ 0.393228] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [ 0.409115] cpuidle: using governor menu [ 0.413051] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.414744] vdso: 2 pages (1 code @ ffffff8008f57000, 1 data @ ffffff8009e24000) [ 0.414793] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.417683] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.419266] tegra_bpmp_of_clk_init: EMC proxy not found. [ 0.420237] tegra_powergate_init: DONE [ 0.420276] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-a02.dts [ 0.420312] DTB Build time: Mar 15 2019 09:52:07 [ 0.422011] Tegra reboot handler registered. [ 0.426486] iommu: Adding device tegra-carveouts to group 0 [ 0.426666] platform tegra-carveouts: domain=ffffffc0f9be8318 allocates as[0]=ffffffc0f9bfc0a8 [ 0.427042] iommu: Adding device smmu_test to group 1 [ 0.427110] platform smmu_test: domain=ffffffc0f9be8558 allocates as[0]=ffffffc0f9bfc110 [ 0.427949] mc: mapped MMIO address: 0xffffff800802e000 -> 0x70019000 [ 0.428026] mc: mapped MMIO address: 0xffffff8008065000 -> 0x7001c000 [ 0.428100] mc: mapped MMIO address: 0xffffff8008079000 -> 0x7001d000 [ 0.428123] nv-tegra-mc 70019000.mc: No mssnvlink node [ 0.428160] mc-err: mcerr ops are set to t21x [ 0.437712] iommu: Adding device 70090000.xusb to group 2 [ 0.438062] iommu: Adding device 70006000.serial to group 3 [ 0.438141] platform 70006000.serial: domain=ffffffc0f9401c18 allocates as[0]=ffffffc0f9bfc178 [ 0.438580] iommu: Adding device 70006040.serial to group 4 [ 0.438855] iommu: Adding device 70006200.serial to group 5 [ 0.439062] iommu: Adding device sound to group 6 [ 0.439126] platform sound: domain=ffffffc0f9475198 allocates as[0]=ffffffc0f9bfc1e0 [ 0.439730] iommu: Adding device 7000d400.spi to group 7 [ 0.440025] iommu: Adding device 7000d600.spi to group 8 [ 0.440356] iommu: Adding device 70410000.spi to group 9 [ 0.440676] iommu: Adding device 50000000.host1x to group 10 [ 0.440976] iommu: Adding device 54080000.vi to group 11 [ 0.441433] iommu: Adding device 54600000.isp to group 12 [ 0.441709] iommu: Adding device 54680000.isp to group 13 [ 0.442004] iommu: Adding device tegradc.0 to group 14 [ 0.442072] platform tegradc.0: domain=ffffffc0f94830d8 allocates as[0]=ffffffc0f9bfc248 [ 0.446289] platform tegradc.0: IOVA linear map 0x0000000092cb6000(800000) [ 0.446701] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000) [ 0.447056] iommu: Adding device tegradc.1 to group 15 [ 0.447121] platform tegradc.1: domain=ffffffc0f9483318 allocates as[0]=ffffffc0f9bfc2b0 [ 0.451314] platform tegradc.1: IOVA linear map 0x0000000092cb6000(800000) [ 0.451726] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000) [ 0.452026] iommu: Adding device 54340000.vic to group 16 [ 0.452244] iommu: Adding device 544c0000.nvenc to group 17 [ 0.452448] iommu: Adding device 54500000.tsec to group 18 [ 0.452652] iommu: Adding device 54100000.tsecb to group 19 [ 0.452875] iommu: Adding device 54480000.nvdec to group 20 [ 0.453098] iommu: Adding device 54380000.nvjpg to group 21 [ 0.454165] iommu: Adding device 546c0000.i2c to group 22 [ 0.454513] iommu: Adding device 57000000.gpu to group 23 [ 0.454591] platform 57000000.gpu: domain=ffffffc0f94f7318 allocates as[0]=ffffffc0f9bfc318 [ 0.454672] platform 57000000.gpu: domain=ffffffc0f94f7318 allocates as[1]=ffffffc0f9bfc380 [ 0.454734] platform 57000000.gpu: domain=ffffffc0f94f7318 allocates as[2]=ffffffc0f9bfc3e8 [ 0.454786] platform 57000000.gpu: domain=ffffffc0f94f7318 allocates as[3]=ffffffc0f9bfc450 [ 0.455673] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.455716] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [ 0.455743] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.455764] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM [ 0.455780] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.505291] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.505325] tegra-pmc: Clear bootloader IO dpd settings [ 0.505361] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [ 0.505442] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [ 0.505770] iommu: Adding device 70012000.se to group 24 [ 0.506581] iommu: Adding device 7000c000.i2c to group 25 [ 0.506844] iommu: Adding device 7000c400.i2c to group 26 [ 0.507112] iommu: Adding device 7000c500.i2c to group 27 [ 0.507379] iommu: Adding device 7000c700.i2c to group 28 [ 0.507662] iommu: Adding device 7000d000.i2c to group 29 [ 0.507926] iommu: Adding device 7000d100.i2c to group 30 [ 0.508236] iommu: Adding device sdhci-tegra.0 to group 31 [ 0.508311] platform sdhci-tegra.0: domain=ffffffc0f9506498 allocates as[0]=ffffffc0f9bfc4b8 [ 0.509264] iommu: Adding device 700d0000.xudc to group 32 [ 0.513919] vdd-ac-bat: 5000 mV [ 0.514315] vdd-5v0-sys: 5000 mV [ 0.515316] vdd-5v0-hdmi: supplied by vdd-5v0-sys [ 0.515380] vdd-5v0-hdmi: 5000 mV [ 0.515804] vdd-1v8: 1800 mV [ 0.516289] vdd-fan: supplied by vdd-5v0-sys [ 0.516341] vdd-fan: 5000 mV [ 0.516765] vdd-usb-vbus: supplied by vdd-5v0-sys [ 0.516819] vdd-usb-vbus: 5000 mV [ 0.517402] vdd-usb-vbus2: 5000 mV [ 0.546226] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.548808] GPIO line 151 (camera-control-output-low) hogged as output/low [ 0.550166] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio) [ 0.558377] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.558746] SCSI subsystem initialized [ 0.559000] libata version 3.00 loaded. [ 0.559294] usbcore: registered new interface driver usbfs [ 0.559371] usbcore: registered new interface driver hub [ 0.559462] usbcore: registered new device driver usb [ 0.563569] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8 [ 0.565192] random: fast init done [ 0.569263] vdd-core: 600 <--> 1162 mV at 1125 mV [ 0.570531] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV [ 0.573110] vdd-ddr-1v1: 1150 mV [ 0.576978] vdd-pre-reg-1v35: 1350 mV [ 0.580960] vdd-1v8: 1800 mV [ 0.581241] vdd-1v8: Failed to create debugfs directory [ 0.584968] avdd-sys-1v2: 1200 mV [ 0.588961] vdd-pex-1v0: 1050 mV [ 0.589734] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV [ 0.590399] max77620-ldo3: at 3100 mV [ 0.592968] vdd-rtc: 850 <--> 1100 mV at 1000 mV [ 0.593616] max77620-ldo5: at 3100 mV [ 0.594265] max77620-ldo6: at 2800 mV [ 0.596961] avdd-1v05-pll: 1050 mV [ 0.600961] avdd-io-hdmi-dp: 1050 mV [ 0.602570] GPIO line 505 (spmic-default-output-high) hogged as output/high [ 0.602873] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio) [ 0.604991] max77620 4-003c: max77620 probe successful [ 0.607391] i2c i2c-6: Unbalanced pm_runtime_enable! [ 0.607987] media: Linux media interface: v0.10 [ 0.608052] Linux video capture interface: v2.00 [ 0.609048] pps_core: LinuxPPS API ver. 1 registered [ 0.609074] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.609116] PTP clock support registered [ 0.612541] tegra_fiq_debugger_init: found FIQ source (IRQ 98) [ 0.618909] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table [ 0.619759] Advanced Linux Sound Architecture Driver Initialized. [ 0.620605] Bluetooth: Core ver 2.22 [ 0.620679] NET: Registered protocol family 31 [ 0.620696] Bluetooth: HCI device and connection manager initialized [ 0.620725] Bluetooth: HCI socket layer initialized [ 0.620747] Bluetooth: L2CAP socket layer initialized [ 0.620785] Bluetooth: SCO socket layer initialized [ 0.622529] tegra210_dvfs: no clock found for sdmmc2_ddr [ 0.622567] tegra210_dvfs: no clock found for sdmmc4_ddr [ 0.622625] tegra210_dvfs: no clock found for sdmmc1_ddr [ 0.622653] tegra210_dvfs: no clock found for sdmmc3_ddr [ 0.625663] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe [ 0.627053] vdd-3v3-sys: supplied by vdd-5v0-sys [ 0.627136] vdd-3v3-sys: 3300 mV [ 0.627428] vdd-1v8: supplied by vdd-3v3-sys [ 0.628529] vdd-usb-vbus2: supplied by vdd-3v3-sys [ 0.629009] vdd-3v3-sd: supplied by vdd-3v3-sys [ 0.629085] vdd-3v3-sd: 3300 mV [ 0.630269] avdd-io-edp-1v05: supplied by avdd-1v05-pll [ 0.630330] avdd-io-edp-1v05: 1050 mV [ 0.630817] vdd-usb-hub-en: supplied by vdd-1v8 [ 0.630869] vdd-usb-hub-en: 5000 mV [ 0.632399] camchar: rtcpu character device driver loaded [ 0.633159] extcon-gpio-states extcon:extcon@1: Cable state:0, cable id:0 [ 0.634549] clocksource: Switched to clocksource arch_sys_counter [ 0.675197] VFS: Disk quotas dquot_6.6.0 [ 0.675369] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.675885] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.676341] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000 [ 0.676391] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000) [ 0.676615] cma: enabled page replacement for spfn=d7000, epfn=f0000 [ 0.676638] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.676664] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 0.676715] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048 [ 0.676742] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout [ 0.676775] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways [ 0.676798] nvmap_page_pool_init: Total RAM pages: 1010752 [ 0.676815] nvmap_page_pool_init: nvmap page pool size: 126344 pages (493 MB) [ 0.676924] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.677416] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) [ 0.678441] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB) [ 0.686748] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 0.687177] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 0.687454] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.687693] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.687893] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.688185] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.688208] pre_t19x_iso_plat_init(): max_iso_bw=33280000KB [ 0.688662] NET: Registered protocol family 2 [ 0.689669] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.689904] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.690457] TCP: Hash tables configured (established 32768 bind 32768) [ 0.690706] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.690809] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.691246] NET: Registered protocol family 1 [ 0.692080] RPC: Registered named UNIX socket transport module. [ 0.692111] RPC: Registered udp transport module. [ 0.692127] RPC: Registered tcp transport module. [ 0.692144] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.692171] PCI: CLS 0 bytes, default 64 [ 0.692420] Trying to unpack rootfs image as initramfs... [ 0.702038] host1x 50000000.host1x: initialized [ 0.703985] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.707301] audit: initializing netlink subsys (disabled) [ 0.707399] audit: type=2000 audit(0.555:1): initialized [ 0.708185] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.718382] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.719967] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.720789] 9p: Installing v9fs 9p2000 file system support [ 0.724253] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.724420] io scheduler noop registered [ 0.724731] io scheduler cfq registered (default) [ 0.727556] gic 702f9000.agic: GIC IRQ controller registered [ 0.730530] iommu: Adding device 702ef000.adsp to group 33 [ 0.737840] iommu: Adding device aconnect@702c0000:adsp_audio to group 34 [ 0.738030] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered [ 0.738688] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x69a840c [ 0.738722] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 0.740375] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 0.740509] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 0.740621] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 0.740832] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 [ 0.740945] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 [ 0.741057] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 [ 0.741171] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 [ 0.741281] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 [ 0.741392] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb [ 0.741499] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb [ 0.747971] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops [ 0.749317] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [ 0.751263] tegra-pcie 1003000.pcie-controller: 4x1, 1x1 configuration [ 0.752582] tegra-pcie 1003000.pcie-controller: PCIE: Enable power rails [ 0.752957] tegra-pcie 1003000.pcie-controller: probing port 0, using 4 lanes [ 0.754156] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 0.754401] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=750000, max_bw=1500000 [ 0.754722] tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes [ 0.754973] Adding domain tsec-pd to PM domain host1x-pd [ 0.758029] tsec 54500000.tsec: initialized [ 0.759538] tsec 54100000.tsecb: initialized [ 0.760260] Adding domain nvdec-pd to PM domain host1x-pd [ 0.763520] nvdec 54480000.nvdec: initialized [ 0.764637] Adding domain vic03-pd to PM domain host1x-pd [ 0.764855] Adding domain msenc-pd to PM domain host1x-pd [ 0.765036] Adding domain nvjpg-pd to PM domain host1x-pd [ 0.768726] falcon 54340000.vic: initialized [ 0.770099] falcon 544c0000.nvenc: initialized [ 0.771521] falcon 54380000.nvjpg: initialized [ 0.776220] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1 [ 0.776357] display board info: id 0x0, fab 0x0 [ 0.776431] generic_infoframe_type: 0x87 [ 0.776585] tegradc tegradc.0: DT parsed successfully [ 0.776645] tegradc tegradc.0: Display dc.ffffff800ab40000 registered with id=0 [ 0.777352] tegradc tegradc.0: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350781 [ 0.780749] tegradc tegradc.0: probed [ 0.784515] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.789129] tegra-pcie 1003000.pcie-controller: PCI host bridge to bus 0000:00 [ 0.789189] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.789212] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 0.789236] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 0.789261] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.789344] pci 0000:00:01.0: [10de:0fae] type 01 class 0x060400 [ 0.789524] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.789887] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400 [ 0.789990] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.790217] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.790257] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.790505] pci 0000:01:00.0: [8086:24fd] type 00 class 0x028000 [ 0.790605] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit] [ 0.790938] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.792736] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 10 channels [ 0.794438] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized [ 0.795214] kfuse 7000fc00.kfuse: initialized [ 0.796972] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available [ 0.798033] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 0.799664] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [ 0.799719] vdd-cpu: 708 <--> 1322 mV at 708 mV [ 0.800225] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed [ 0.802055] vdd-gpu: applied init 1000000uV constraint [ 0.802088] vdd-gpu: 708 <--> 1323 mV at 997 mV [ 0.802560] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed [ 0.802790] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.803115] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.803169] pci 0000:02:00.0: reg 0x10: [io 0x0000-0x00ff] [ 0.803223] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 0.803259] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 0.803544] pci 0000:02:00.0: supports D1 D2 [ 0.803550] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.808397] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.808620] No Device Node present for smmu client: serial8250 !! [ 0.808651] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 0.808737] iommu: Adding device serial8250 to group 35 [ 0.812461] console [ttyS0] disabled [ 0.812622] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra [ 0.814824] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 0.814976] pci 0000:00:01.0: BAR 14: assigned [mem 0x13000000-0x130fffff] [ 0.814987] pci 0000:00:02.0: BAR 14: assigned [mem 0x13100000-0x131fffff] [ 0.814992] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.815006] pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit] [ 0.815045] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.815058] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff] [ 0.815076] pci 0000:02:00.0: BAR 4: assigned [mem 0x13100000-0x13103fff 64bit] [ 0.815102] pci 0000:02:00.0: BAR 2: assigned [mem 0x13104000-0x13104fff 64bit] [ 0.815130] pci 0000:02:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 0.815140] pci 0000:00:02.0: PCI bridge to [bus 02] [ 0.815144] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 0.815151] pci 0000:00:02.0: bridge window [mem 0x13100000-0x131fffff] [ 0.817085] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 0.817094] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 0.817108] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 0.817299] aer 0000:00:01.0:pcie002: service driver aer loaded [ 0.817602] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 0.817606] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 0.817611] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [ 0.817735] aer 0000:00:02.0:pcie002: service driver aer loaded [ 3.247660] console [ttyS0] enabled [ 3.248351] Console: switching to colour frame buffer device 240x67 [ 3.249266] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART [ 3.249624] serial-tegra 70006200.serial: RX in PIO mode [ 3.249710] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [ 3.250857] [drm] Initialized [ 3.280015] brd: module loaded [ 3.287915] tegradc tegradc.0: fb registered [ 3.293214] loop: module loaded [ 3.296811] tegra_profiler: version: 1.132, samples/io: 46/26 [ 3.301084] tegradc tegradc.0: DC initialized, skipping tegra_dc_program_mode. [ 3.301128] tegradc tegradc.0: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_75m_150m [ 3.301633] tegradc tegradc.0: hdmi: get RGB quant from REG programmed by BL. [ 3.301642] tegradc tegradc.0: hdmi: get YCC quant from REG programmed by BL. [ 3.301972] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 3.301975] Extcon AUX1(HDMI) enable [ 3.302746] edid invalid [ 3.302976] tegradc tegradc.1: disp1 connected to head1->/host1x/sor [ 3.303048] tegradc tegradc.1: No lt-data, using default setting [ 3.303073] tegradc tegradc.1: No hpd-gpio in DT [ 3.303103] tegradc tegradc.1: DT parsed successfully [ 3.303157] tegradc tegradc.1: Display dc.ffffff800f4c0000 registered with id=1 [ 3.304573] tegradc tegradc.1: dpd enable lookup fail:-19 [ 3.315379] tegradc tegradc.1: probed [ 3.330451] tegradc tegradc.0: nominal-pclk:148351648 parent:148350781 div:1.0 pclk:148350781 146868084~161703244 [ 3.394347] tegradc tegradc.1: fb registered [ 3.394499] tegra_profiler: auth: init [ 3.396019] THERMAL EST: found 2 subdevs [ 3.396025] THERMAL EST num_resources: 0 [ 3.396033] [THERMAL EST subdev 0] [ 3.396040] [THERMAL EST subdev 1] [ 3.396511] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 3.396513] THERMAL EST: thz register success. [ 3.396692] THERMAL EST: end of probe, return err: 0 [ 3.397977] hisi_sas: driver version v1.6 [ 3.402347] tegra-qspi 70410000.spi: Prod settings list not found [ 3.406465] qspi_mtd spi32766.0: MX25U3235F (4096 Kbytes) [ 3.406473] qspi_mtd spi32766.0: mtd .name = spi32766.0, .size = 0x400000 (4MiB) .erasesize = 0x00001000 (4KiB) .numeraseregions = 0 [ 3.413325] libphy: Fixed MDIO Bus: probed [ 3.413938] tun: Universal TUN/TAP device driver, 1.6 [ 3.413940] tun: (C) 1999-2004 Max Krasnyansky [ 3.415319] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 3.415321] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.415385] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 3.415386] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.415442] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 3.415443] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 3.415491] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 3.415495] Copyright(c) 1999 - 2017 Intel Corporation. [ 3.416483] r8168 0000:02:00.0: enabling device (0000 -> 0003) [ 3.416517] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 3.431358] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 3.431395] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 3.432009] PPP generic driver version 2.4.2 [ 3.432227] PPP BSD Compression module registered [ 3.432233] PPP Deflate Compression module registered [ 3.432276] PPP MPPE Compression module registered [ 3.432283] NET: Registered protocol family 24 [ 3.432356] usbcore: registered new interface driver r8152 [ 3.432405] usbcore: registered new interface driver asix [ 3.432469] usbcore: registered new interface driver ax88179_178a [ 3.432508] usbcore: registered new interface driver cdc_ether [ 3.432555] usbcore: registered new interface driver net1080 [ 3.432596] usbcore: registered new interface driver cdc_subset [ 3.432642] usbcore: registered new interface driver zaurus [ 3.432698] usbcore: registered new interface driver cdc_ncm [ 3.432881] VFIO - User Level meta-driver version: 0.3 [ 3.434170] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.434194] ehci-pci: EHCI PCI platform driver [ 3.434242] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.434254] ohci-pci: OHCI PCI platform driver [ 3.434301] ohci-platform: OHCI generic platform driver [ 3.437367] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP [ 3.437990] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 [ 3.439193] tegra-xusb 70090000.xusb: extcon 0: ffffffc0fa5d2c00 id [ 3.439303] tegra-xusb 70090000.xusb: Direct firmware load for tegra21x_xusb_firmware failed with error -2 [ 3.439306] tegra-xusb 70090000.xusb: Falling back to user helper [ 3.440631] usbcore: registered new interface driver uas [ 3.440686] usbcore: registered new interface driver usb-storage [ 3.440808] usbcore: registered new interface driver usbserial [ 3.444043] tegra-xudc-new 700d0000.xudc: device count: 1 [ 3.445422] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [ 3.445435] tegra-xudc-new 700d0000.xudc: vbus state: 0 [ 3.445472] tegra-xudc-new 700d0000.xudc: entering ELPG [ 3.445734] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 3.446411] mousedev: PS/2 mouse device common for all mice [ 3.446497] usbcore: registered new interface driver xpad [ 3.674293] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 3.685963] rtc rtc1: alarm rtc device [ 3.685987] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 3.686016] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 3.686620] i2c /dev entries driver [ 3.688245] imx219 6-0010: tegracam sensor driver:imx219_v2.0.6 [ 3.712629] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 3.712705] imx219 6-0010: imx219_board_setup: error during i2c read probe (-121) [ 3.712737] imx219 6-0010: board setup failed [ 3.712840] imx219: probe of 6-0010 failed with error -121 [ 3.718768] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 3.759362] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [ 3.759367] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 [ 3.759822] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 3.759839] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [ 3.759848] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC [ 3.759978] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 3.759988] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 3.759994] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [ 3.760138] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 3.760149] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 3.760153] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [ 3.760333] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 3.761161] tegra_aotag tegra-aotag: Registering sensor 0 [ 3.761217] tegra_aotag tegra-aotag: Invalid temp readout [ 3.761245] tegra_aotag tegra-aotag: Invalid temp readout [ 3.761262] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 3.761270] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 3.762173] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 3.762190] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 3.762386] tegra_aotag tegra-aotag: Invalid temp readout [ 3.762416] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [ 3.762923] parse_throttle_dt_data: Num cap clks = 6 [ 3.762929] parse_throttle_dt_data: clk=cclk_g type=2 [ 3.762945] parse_throttle_dt_data: clk=gpu type=4 [ 3.762973] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 3.762992] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 3.763013] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 3.763016] parse_throttle_dt_data: clk=emc type=3 [ 3.764396] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 3.764493] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 3.764645] tegra_throttle_probe: probe successful. #cdevs=4 [ 3.765455] FAN dev name: pwm-fan [ 3.765507] FAN:gpio request success. [ 3.765579] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 3.765882] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 3.766081] pwm_fan_driver pwm-fan: fan tach request irq success [ 3.766091] pwm_fan_driver pwm-fan: tach period: 1000 [ 3.766192] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 3.766196] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 3.766200] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 3.766204] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 3.766208] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 3.766212] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 3.766215] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 3.766218] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 3.766222] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 3.766225] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 3.766926] tegra-wdt 60005100.watchdog: Tegra WDT enabled on probe. Timeout = 120 seconds. [ 3.767270] tegra-wdt 60005100.watchdog: initialized (timeout = 120 sec, nowayout = 1) [ 3.768180] device-mapper: uevent: version 1.0.3 [ 3.768658] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 3.774086] tegra210-cpufreq cpufreq: probe()...completed [ 3.774802] sdhci: Secure Digital Host Controller Interface driver [ 3.774804] sdhci: Copyright(c) Pierre Ossman [ 3.774805] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.775293] sdhci-tegra sdhci-tegra.0: Got CD GPIO [ 3.775646] sdhci-tegra sdhci-tegra.0: Client registration for eMC Successful [ 3.775770] sdhci-tegra sdhci-tegra.0: wakeup init done, cdirq 300 [ 3.779540] tegra-se 70012000.se: tegra_se_probe: complete [ 3.780108] hidraw: raw HID events driver (C) Jiri Kosina [ 3.781385] usbcore: registered new interface driver usbhid [ 3.781386] usbhid: USB HID core driver [ 3.800836] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 3.801060] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 3.802775] nvpmodel: initialized successfully [ 3.804092] usbcore: registered new interface driver snd-usb-audio [ 3.804149] No Device Node present for smmu client: snd-soc-dummy !! [ 3.804154] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 3.804172] iommu: Adding device snd-soc-dummy to group 36 [ 3.826695] mmc0: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA 64-bit with 64 bit addr [ 3.834064] OPE platform probe [ 3.834153] OPE platform probe successful [ 3.834596] OPE platform probe [ 3.834682] OPE platform probe successful [ 3.860306] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 3.860441] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 3.860565] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 3.860687] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 3.860811] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 3.860933] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 3.861058] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 3.861179] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 3.861302] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 3.861426] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 3.874065] u32 classifier [ 3.874066] Actions configured [ 3.874133] Initializing XFRM netlink socket [ 3.874893] NET: Registered protocol family 10 [ 3.875614] NET: Registered protocol family 17 [ 3.875625] NET: Registered protocol family 15 [ 3.875700] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.875744] Bluetooth: RFCOMM socket layer initialized [ 3.875752] Bluetooth: RFCOMM ver 1.11 [ 3.875756] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.875760] Bluetooth: HIDP socket layer initialized [ 3.875778] 9pnet: Installing 9P2000 support [ 3.875817] Key type dns_resolver registered [ 3.881357] Registered cp15_barrier emulation handler [ 3.881370] Registered setend emulation handler [ 3.882501] registered taskstats version 1 [ 3.883167] Adding domain ve2-pd to PM domain host1x-pd [ 3.883409] Adding domain ve-pd to PM domain host1x-pd [ 4.478231] tegradc tegradc.0: blank - powerdown [ 4.481292] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 4.481294] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 4.481299] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 4.481899] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0 [ 4.482313] isp 54600000.isp: initialized [ 4.483156] isp 54680000.isp: initialized [ 4.494960] clk_cbus_recalc_rate: no gbus parent [ 4.494965] clk_cbus_round_rate: no gbus parent [ 4.494966] clk_cbus_round_rate: no gbus parent [ 4.494973] clk_cbus_recalc_rate: no gbus parent [ 4.495073] clk_cbus_recalc_rate: no gbus parent [ 4.495076] clk_cbus_round_rate: no gbus parent [ 4.495077] clk_cbus_round_rate: no gbus parent [ 4.495080] clk_cbus_recalc_rate: no gbus parent [ 4.495774] tegra_dvfs: GPU-cap: registered [ 4.495828] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled [ 4.495830] tegra dvfs: vdd-core: nominal 1125mV, offset 600000uV, step 12500uV, scaling enabled [ 4.495832] tegra dvfs: vdd-gpu: nominal 1068mV, offset 708000uV, step 10000uV, scaling enabled [ 4.497861] tegra_dvfs: vdd-gpu-vts: registered [ 4.498886] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered [ 4.499566] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered [ 4.500046] input: gpio-keys as /devices/gpio-keys/input/input1 [ 4.516102] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 4.516104] Extcon AUX1(HDMI) disable [ 4.531867] tegra_rtc 7000e000.rtc: setting system clock to 2000-01-01 01:00:28 UTC (946688428) [ 4.532841] vi 54080000.vi: vi_probe: ++ [ 4.537048] vi 54080000.vi: initialized [ 4.539335] vi 54080000.vi: subdev nvcsi--1 bound [ 4.540740] Disable partitions left on by BL [ 4.540743] disb [ 4.540788] bwmgr: missing cdev-type property [ 4.540883] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.540889] DRAM derating cdev registered. [ 4.541910] vdd-1v8: disabling [ 4.541913] vdd-fan: disabling [ 4.541915] vdd-usb-vbus: disabling [ 4.541916] vdd-usb-vbus2: disabling [ 4.541925] avdd-io-edp-1v05: disabling [ 4.541927] vdd-usb-hub-en: disabling [ 4.542089] ALSA device list: [ 4.542091] #0: tegra-hda at 0x70038000 irq 83 [ 4.542092] #1: tegra-snd-t210ref-mobile-rt565x [ 4.545944] tegradc tegradc.0: unblank [ 4.583585] tegradc tegradc.0: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000 [ 4.583637] tegradc tegradc.0: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_75m_150m [ 4.584630] tegradc tegradc.0: hdmi: get RGB quant from EDID. [ 4.584636] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 4.587858] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 4.587860] Extcon AUX1(HDMI) enable [ 4.588126] tegradc tegradc.0: sync windows ret = 250 [ 4.693254] mmc0: hw tuning done ... [ 4.693288] mmc0: new ultra high speed SDR50 SDHC card at address aaaa [ 4.693648] mmcblk0: mmc0:aaaa SU32G 29.7 GiB [ 4.700133] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 4.994544] tegradc tegradc.1: blank - powerdown [ 5.000998] extcon-disp-state extcon:disp-state: cable 44 state 0 already set. [ 5.001000] Extcon DP: HPD disabled [ 5.001002] hpd: hpd_switch 0 [ 5.001004] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 5.001017] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 5.001021] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 5.045345] extcon-disp-state extcon:disp-state: cable 40 state 1 [ 5.045347] Extcon HDMI: HPD enabled [ 5.045359] tegradc tegradc.0: hdmi: plugged [ 17.718115] EXT4-fs (mmcblk0p1): 3 orphan inodes deleted [ 17.725319] EXT4-fs (mmcblk0p1): recovery complete [ 17.752520] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 17.762347] VFS: Mounted root (ext4 filesystem) on device 179:1. [ 17.773801] devtmpfs: mounted [ 17.781552] Freeing unused kernel memory: 8512K [ 18.111830] systemd[1]: System time before build time, advancing clock. [ 18.166732] ip_tables: (C) 2000-2006 Netfilter Core Team [ 18.187347] cgroup: cgroup2: unknown option "nsdelegate" [ 18.217742] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 18.243774] systemd[1]: Detected architecture arm64. [ 18.284825] systemd[1]: Set hostname to . [ 18.434422] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 18.453668] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 18.646767] random: systemd: uninitialized urandom read (16 bytes read) [ 18.657313] systemd[1]: Created slice System Slice. [ 18.666971] random: systemd: uninitialized urandom read (16 bytes read) [ 18.676064] systemd[1]: Listening on Journal Socket. [ 18.685545] random: systemd: uninitialized urandom read (16 bytes read) [ 18.694502] systemd[1]: Listening on fsck to fsckd communication Socket. [ 18.706669] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 18.717498] systemd[1]: Reached target Swap. [ 18.741606] random: crng init done [ 18.747180] random: 5 urandom warning(s) missed due to ratelimiting [ 18.904872] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 18.992332] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1) [ 19.276683] systemd-journald[1976]: Received request to flush runtime journal from PID 1 [ 19.784100] using random self ethernet address [ 19.791809] using random host ethernet address [ 19.887811] Mass Storage Function, version: 2009/09/11 [ 19.887817] LUN: removable file: (no medium) [ 19.905009] using random self ethernet address [ 19.912307] using random host ethernet address [ 19.930967] rndis0: HOST MAC 8a:f6:fb:bc:c7:dc [ 19.931881] rndis0: MAC 8a:f6:fb:bc:c7:dd [ 19.932317] usb0: HOST MAC 8a:f6:fb:bc:c7:de [ 19.932340] usb0: MAC 8a:f6:fb:bc:c7:df [ 19.932355] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 19.933347] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 19.933364] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled [ 19.933392] tegra-xudc-new 700d0000.xudc: entering ELPG [ 19.933622] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 19.933634] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 19.935922] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 19.935945] tegra-xudc-new 700d0000.xudc: entering ELPG [ 19.936193] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 20.029400] tegra-xusb 70090000.xusb: cannot find firmware....retry after 1 second [ 20.265091] nvs_dsm nvs_dsm: dsm_probe [ 20.265116] nvs_dsm nvs_dsm: dsm_remove [ 20.265119] nvs_dsm nvs_dsm: dsm_probe done [ 20.504078] Intel(R) Wireless WiFi driver for Linux [ 20.504082] Copyright(c) 2003- 2015 Intel Corporation [ 20.504311] iwlwifi 0000:01:00.0: enabling device (0000 -> 0002) [ 21.203369] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8265-26.ucode failed with error -2 [ 21.203372] iwlwifi 0000:01:00.0: Falling back to user helper [ 21.233215] l4tbr0: port 1(rndis0) entered blocking state [ 21.233218] l4tbr0: port 1(rndis0) entered disabled state [ 21.233386] device rndis0 entered promiscuous mode [ 21.239812] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 21.245420] l4tbr0: port 2(usb0) entered blocking state [ 21.245423] l4tbr0: port 2(usb0) entered disabled state [ 21.247471] device usb0 entered promiscuous mode [ 21.249316] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8265-25.ucode failed with error -2 [ 21.249319] iwlwifi 0000:01:00.0: Falling back to user helper [ 21.257957] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8265-24.ucode failed with error -2 [ 21.257960] iwlwifi 0000:01:00.0: Falling back to user helper [ 21.266283] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 21.299783] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8265-23.ucode failed with error -2 [ 21.299786] iwlwifi 0000:01:00.0: Falling back to user helper [ 21.410593] tegra-xusb 70090000.xusb: Firmware timestamp: 2017-11-03 13:36:19 UTC, Version: 50.20 release [ 21.410637] tegra-xusb 70090000.xusb: xHCI Host Controller [ 21.410661] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 [ 21.411505] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [ 21.411539] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 [ 21.411827] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 21.411832] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 21.411835] usb usb1: Product: xHCI Host Controller [ 21.411838] usb usb1: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 21.411841] usb usb1: SerialNumber: 70090000.xusb [ 21.412266] hub 1-0:1.0: USB hub found [ 21.412337] hub 1-0:1.0: 5 ports detected [ 21.412825] tegra-xusb 70090000.xusb: xHCI Host Controller [ 21.412835] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 [ 21.412907] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 21.412980] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 21.412984] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 21.412987] usb usb2: Product: xHCI Host Controller [ 21.412990] usb usb2: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 21.412992] usb usb2: SerialNumber: 70090000.xusb [ 21.413524] hub 2-0:1.0: USB hub found [ 21.413552] hub 2-0:1.0: 4 ports detected [ 21.514654] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [ 21.514759] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 2 [ 21.514952] usb usb2: usb_suspend_both: status 0 [ 21.563100] iwlwifi 0000:01:00.0: loaded firmware version 22.391740.0 op_mode iwlmvm [ 21.738575] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 21.775127] usb 1-2: New USB device found, idVendor=0bda, idProduct=5411 [ 21.775135] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 21.775139] usb 1-2: Product: 4-Port USB 2.1 Hub [ 21.775142] usb 1-2: Manufacturer: Generic [ 21.777081] hub 1-2:1.0: USB hub found [ 21.778247] hub 1-2:1.0: 4 ports detected [ 21.870834] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230 [ 21.873273] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled [ 21.873937] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled [ 21.887679] usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb [ 21.922278] usb 2-1: New USB device found, idVendor=0bda, idProduct=0411 [ 21.922284] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 21.922288] usb 2-1: Product: 4-Port USB 3.1 Hub [ 21.922291] usb 2-1: Manufacturer: Generic [ 21.928855] hub 2-1:1.0: USB hub found [ 21.930340] hub 2-1:1.0: 4 ports detected [ 21.993201] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 21.994058] thermal thermal_zone6: failed to read out thermal zone (-5) [ 22.002623] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type iwlwifi [ 22.034592] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 22.057085] usb 1-3: New USB device found, idVendor=8087, idProduct=0a2b [ 22.057092] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 22.090645] usb 2-1: usb_suspend_both: status 0 [ 22.090871] usb usb2: usb_suspend_both: status 0 [ 22.134590] usb 1-2.4: new full-speed USB device number 4 using tegra-xusb [ 22.164168] usb 1-2.4: New USB device found, idVendor=046d, idProduct=c52b [ 22.164174] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 22.164178] usb 1-2.4: Product: USB Receiver [ 22.164181] usb 1-2.4: Manufacturer: Logitech [ 22.372367] usbcore: registered new interface driver btusb [ 22.379051] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015 [ 22.380045] Bluetooth: hci0: Device revision is 16 [ 22.380048] Bluetooth: hci0: Secure boot is enabled [ 22.380051] Bluetooth: hci0: OTP lock is enabled [ 22.380064] Bluetooth: hci0: API lock is enabled [ 22.380066] Bluetooth: hci0: Debug lock is disabled [ 22.380068] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 22.416727] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi [ 22.649706] logitech-djreceiver 0003:046D:C52B.0003: hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-70090000.xusb-2.4/input2 [ 22.660302] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 22.660313] Bluetooth: BNEP socket layer initialized [ 22.787797] input: Logitech K400 Plus as /devices/70090000.xusb/usb1/1-2/1-2.4/1-2.4:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input2 [ 22.788888] logitech-hidpp-device 0003:046D:404D.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K400 Plus] on usb-70090000.xusb-2.4:1 [ 23.305535] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.307616] eth0: 0xffffff800a35e000, 00:e0:4c:68:01:2c, IRQ 404 [ 23.378749] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.451827] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 23.454278] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled [ 23.454727] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled [ 23.572886] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled [ 23.573327] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled [ 23.634472] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 23.899825] Bluetooth: hci0: Waiting for firmware download to complete [ 23.900016] Bluetooth: hci0: Firmware loaded in 1491919 usecs [ 23.900220] Bluetooth: hci0: Waiting for device to boot [ 23.912089] Bluetooth: hci0: Device booted in 11655 usecs [ 23.924656] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-12-16.ddc [ 23.927230] Bluetooth: hci0: Applying Intel DDC parameters completed [ 24.635764] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 26.897669] tegradc tegradc.0: blank - powerdown [ 26.951516] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 26.951518] Extcon AUX1(HDMI) disable [ 26.971949] tegradc tegradc.0: unblank [ 26.983786] tegradc tegradc.0: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000 [ 26.983867] tegradc tegradc.0: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_75m_150m [ 26.984893] tegradc tegradc.0: hdmi: get RGB quant from EDID. [ 26.984900] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 26.988161] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 26.988162] Extcon AUX1(HDMI) enable [ 26.994109] tegradc tegradc.0: unblank [ 26.994503] tegradc tegradc.1: blank - powerdown [ 259.980554] input: M720 Triathlon as /devices/virtual/misc/uhid/0005:046D:B015.0005/input/input3 [ 259.980969] hid-generic 0005:046D:B015.0005: input,hidraw2: BLUETOOTH HID v0.13 Keyboard [M720 Triathlon] on C0:B6:F9:6C:D7:60 [ 276.352210] tegradc tegradc.0: blank - powerdown [ 276.417916] extcon-disp-state extcon:disp-state: cable 47 state 0 [ 276.417918] Extcon AUX1(HDMI) disable [ 276.438315] tegradc tegradc.1: blank - powerdown [ 276.570325] tegradc tegradc.0: blank - powerdown [ 276.570346] tegradc tegradc.0: unblank [ 276.576532] tegradc tegradc.0: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000 [ 276.576621] tegradc tegradc.0: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_75m_150m [ 276.577640] tegradc tegradc.0: hdmi: get RGB quant from EDID. [ 276.577647] tegradc tegradc.0: hdmi: get YCC quant from EDID. [ 276.580942] extcon-disp-state extcon:disp-state: cable 47 state 1 [ 276.580943] Extcon AUX1(HDMI) enable [ 276.587228] tegradc tegradc.0: unblank [ 276.587268] tegradc tegradc.1: blank - powerdown [ 278.489188] wlan0: authenticate with 70:4f:57:b9:2b:7f [ 278.500448] wlan0: send auth to 70:4f:57:b9:2b:7f (try 1/3) [ 278.507486] wlan0: authenticated [ 278.510616] wlan0: associate with 70:4f:57:b9:2b:7f (try 1/3) [ 278.514136] wlan0: RX AssocResp from 70:4f:57:b9:2b:7f (capab=0x1411 status=0 aid=4) [ 278.516612] wlan0: associated [ 278.543634] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 278.605009] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by 70:4f:57:b9:2b:7f [ 280.302055] fuse init (API version 7.26) [ 280.578958] tegradc tegradc.0: unblank [ 280.578968] tegradc tegradc.1: blank - powerdown