-------------- START ------------------- 07 12 2020 15:00:01 : 67680 | eth 1 : Network connection lost ----------------------------------------- [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.66-v7+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1253 SMP Thu Aug 15 11:49:46 BST 2019 [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi Compute Module 3 Plus Rev 1.0 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 8 MiB at 0x3ac00000 [ 0.000000] On node 0 totalpages: 242688 [ 0.000000] Normal zone: 2133 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 242688 pages, LIFO batch:63 [ 0.000000] random: get_random_bytes called from start_kernel+0xac/0x4b4 with crng_init=0 [ 0.000000] percpu: Embedded 17 pages/cpu s39488 r8192 d21952 u69632 [ 0.000000] pcpu-alloc: s39488 r8192 d21952 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240555 [ 0.000000] Kernel command line: coherent_pool=1M bcm2708_fb.fbwidth=1600 bcm2708_fb.fbheight=1200 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:F5:36:1E vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=PARTUUID=6c998fe8-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 939088K/970752K available (8192K kernel code, 629K rwdata, 2176K rodata, 1024K init, 821K bss, 23472K reserved, 8192K cma-reserved) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xbb800000 - 0xff800000 (1088 MB) lowmem : 0x80000000 - 0xbb400000 ( 948 MB) modules : 0x7f000000 - 0x80000000 ( 16 MB) .text : 0x(ptrval) - 0x(ptrval) (9184 kB) .init : 0x(ptrval) - 0x(ptrval) (1024 kB) .data : 0x(ptrval) - 0x(ptrval) ( 630 kB) .bss : 0x(ptrval) - 0x(ptrval) ( 822 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 26394 entries in 78 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000019] Switching to timer-based delay loop, resolution 52ns [ 0.000278] Console: colour dummy device 80x30 [ 0.000296] console [tty1] enabled [ 0.000340] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.000356] pid_max: default: 32768 minimum: 301 [ 0.000698] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000714] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001627] CPU: Testing write buffer coherency: ok [ 0.002100] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002746] Setting up static identity map for 0x100000 - 0x10003c [ 0.002893] rcu: Hierarchical SRCU implementation. [ 0.003686] smp: Bringing up secondary CPUs ... [ 0.004527] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.005457] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.006322] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.006445] smp: Brought up 1 node, 4 CPUs [ 0.006457] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ 0.006463] CPU: All CPU(s) started in HYP mode. [ 0.006468] CPU: Virtualization extensions available. [ 0.007443] devtmpfs: initialized [ 0.020739] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 [ 0.020976] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.020994] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.021586] pinctrl core: initialized pinctrl subsystem [ 0.022450] NET: Registered protocol family 16 [ 0.025504] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.031295] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.031303] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.031519] Serial: AMBA PL011 UART driver [ 0.034057] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.069594] bcm2835-dma 3f007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1 [ 0.071293] SCSI subsystem initialized [ 0.071516] usbcore: registered new interface driver usbfs [ 0.071571] usbcore: registered new interface driver hub [ 0.071663] usbcore: registered new device driver usb [ 0.090120] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-08-15 12:06, variant start [ 0.100400] raspberrypi-firmware soc:firmware: Firmware hash is 0e6daa5106dd4164474616408e0dc24f997ffcf3 [ 0.111814] clocksource: Switched to clocksource arch_sys_counter [ 0.200895] VFS: Disk quotas dquot_6.6.0 [ 0.200978] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.201146] FS-Cache: Loaded [ 0.201354] CacheFiles: Loaded [ 0.211352] NET: Registered protocol family 2 [ 0.212149] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.212185] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.212295] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.212481] TCP: Hash tables configured (established 8192 bind 8192) [ 0.212614] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.212660] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.212968] NET: Registered protocol family 1 [ 0.213527] RPC: Registered named UNIX socket transport module. [ 0.213533] RPC: Registered udp transport module. [ 0.213539] RPC: Registered tcp transport module. [ 0.213545] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.215394] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available [ 0.218404] Initialise system trusted keyrings [ 0.218586] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.228554] FS-Cache: Netfs 'nfs' registered for caching [ 0.229126] NFS: Registering the id_resolver key type [ 0.229153] Key type id_resolver registered [ 0.229159] Key type id_legacy registered [ 0.229175] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.231435] Key type asymmetric registered [ 0.231444] Asymmetric key parser 'x509' registered [ 0.231493] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.231655] io scheduler noop registered [ 0.231663] io scheduler deadline registered (default) [ 0.231926] io scheduler cfq registered [ 0.231934] io scheduler mq-deadline registered (default) [ 0.231940] io scheduler kyber registered [ 0.235147] bcm2708_fb soc:fb: FB found 1 display(s) [ 0.289367] Console: switching to colour frame buffer device 200x75 [ 0.320510] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1600x1200 [ 0.322855] bcm2835-rng 3f104000.rng: hwrng registered [ 0.323183] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 0.323726] vc-sm: Videocore shared memory driver [ 0.324050] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [ 0.334997] brd: module loaded [ 0.345514] loop: module loaded [ 0.346171] Loading iSCSI transport class v2.0-870. [ 0.346879] libphy: Fixed MDIO Bus: probed [ 0.346993] usbcore: registered new interface driver lan78xx [ 0.347053] usbcore: registered new interface driver smsc95xx [ 0.347070] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 0.374942] dwc_otg 3f980000.usb: base=(ptrval) [ 0.575168] Core Release: 2.80a [ 0.575177] Setting default values for core params [ 0.575210] Finished setting default values for core params [ 0.775525] Using Buffer DMA mode [ 0.775533] Periodic Transfer Interrupt Enhancement - disabled [ 0.775539] Multiprocessor Interrupt Enhancement - disabled [ 0.775547] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 0.775563] Dedicated Tx FIFOs mode [ 0.776045] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = bad04000 dma = 0xfad04000 len=9024 [ 0.776073] FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints Interrupt/Control Split Transaction hack enabled [ 0.776081] dwc_otg: Microframe scheduler enabled [ 0.776138] WARN::hcd_init_fiq:457: FIQ on core 1 [ 0.776150] WARN::hcd_init_fiq:458: FIQ ASM at 80654f4c length 36 [ 0.776162] WARN::hcd_init_fiq:497: MPHI regs_base at bb810000 [ 0.776179] dwc_otg 3f980000.usb: DWC OTG Controller [ 0.776213] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 0.776250] dwc_otg 3f980000.usb: irq 56, io mem 0x00000000 [ 0.776298] Init: Port Power? op_state=1 [ 0.776305] Init: Power Port (0) [ 0.776565] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 0.776578] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.776587] usb usb1: Product: DWC OTG Controller [ 0.776597] usb usb1: Manufacturer: Linux 4.19.66-v7+ dwc_otg_hcd [ 0.776606] usb usb1: SerialNumber: 3f980000.usb [ 0.777246] hub 1-0:1.0: USB hub found [ 0.777298] hub 1-0:1.0: 1 port detected [ 0.777891] dwc_otg: FIQ enabled [ 0.777897] dwc_otg: NAK holdoff enabled [ 0.777903] dwc_otg: FIQ split-transaction FSM enabled [ 0.777914] Module dwc_common_port init [ 0.778173] usbcore: registered new interface driver usb-storage [ 0.778354] mousedev: PS/2 mouse device common for all mice [ 0.779405] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 0.779646] bcm2835-cpufreq: min=600000 max=1200000 [ 0.780125] sdhci: Secure Digital Host Controller Interface driver [ 0.780130] sdhci: Copyright(c) Pierre Ossman [ 0.780526] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe [ 0.780929] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe [ 0.781056] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.781549] ledtrig-cpu: registered to indicate activity on CPUs [ 0.781629] hidraw: raw HID events driver (C) Jiri Kosina [ 0.781852] usbcore: registered new interface driver usbhid [ 0.781858] usbhid: USB HID core driver [ 0.782702] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0 [ 0.784335] [vc_sm_connected_init]: start [ 0.794010] [vc_sm_connected_init]: end - returning 0 [ 0.795136] Initializing XFRM netlink socket [ 0.795163] NET: Registered protocol family 17 [ 0.795282] Key type dns_resolver registered [ 0.795879] Registering SWP/SWPB emulation handler [ 0.796542] registered taskstats version 1 [ 0.796560] Loading compiled-in X.509 certificates [ 0.803876] uart-pl011 3f201000.serial: cts_event_workaround enabled [ 0.803966] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2 [ 0.804028] console [ttyAMA0] enabled [ 0.806035] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0 [ 0.806046] mmc-bcm2835 3f300000.mmc: DMA channel allocated [ 0.832304] sdhost: log_buf @ (ptrval) (fad07000) [ 0.879496] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 0.880947] of_cfs_init [ 0.881118] of_cfs_init: OK [ 0.881775] Waiting for root device PARTUUID=6c998fe8-02... [ 0.904620] random: fast init done [ 0.908625] mmc1: new high speed SDIO card at address 0001 [ 0.974077] mmc0: new high speed MMC card at address 0001 [ 0.975239] mmcblk0: mmc0:0001 DG4064 59.2 GiB [ 0.976095] mmcblk0boot0: mmc0:0001 DG4064 partition 1 4.00 MiB [ 0.976964] mmcblk0boot1: mmc0:0001 DG4064 partition 2 4.00 MiB [ 0.977327] mmcblk0rpmb: mmc0:0001 DG4064 partition 3 4.00 MiB, chardev (246:0) [ 0.979348] mmcblk0: p1 p2 [ 1.011956] Indeed it is in host mode hprt0 = 00021501 [ 1.023791] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.023852] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.025524] devtmpfs: mounted [ 1.073846] Freeing unused kernel memory: 1024K [ 1.102239] Run /sbin/init as init process [ 1.221874] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 1.222048] Indeed it is in host mode hprt0 = 00001101 [ 1.462200] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [ 1.462215] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.462871] hub 1-1:1.0: USB hub found [ 1.462962] hub 1-1:1.0: 5 ports detected [ 1.632172] systemd[1]: System time before build time, advancing clock. [ 1.781977] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 1.783004] NET: Registered protocol family 10 [ 1.784301] Segment Routing with IPv6 [ 1.825922] random: systemd: uninitialized urandom read (16 bytes read) [ 1.829372] random: systemd: uninitialized urandom read (16 bytes read) [ 1.835437] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 1.836089] systemd[1]: Detected architecture arm. [ 1.837144] systemd[1]: Set hostname to . [ 1.910119] random: systemd-cryptse: uninitialized urandom read (16 bytes read) [ 1.912504] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [ 1.912521] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.915581] smsc95xx v1.0.6 [ 1.927172] uart-pl011 3f201000.serial: no DMA platform data [ 2.005839] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:36:1e [ 2.101870] usb 1-1.5: new high-speed USB device number 4 using dwc_otg [ 2.244500] usb 1-1.5: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01 [ 2.244518] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.244528] usb 1-1.5: Product: AX88772B [ 2.244537] usb 1-1.5: Manufacturer: ASIX Elec. Corp. [ 2.244546] usb 1-1.5: SerialNumber: 0016FE [ 2.321190] systemd[1]: Reached target Swap. [ 2.322064] systemd[1]: Listening on Journal Socket (/dev/log). [ 2.323144] systemd[1]: Created slice User and Session Slice. [ 2.323417] systemd[1]: Listening on Syslog Socket. [ 2.323823] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 2.324125] systemd[1]: Listening on udev Control Socket. [ 2.324454] systemd[1]: Listening on Journal Socket. [ 2.474691] i2c /dev entries driver [ 3.043519] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 3.127134] systemd-journald[100]: Received request to flush runtime journal from PID 1 [ 3.428331] i2c-gpio i2c@0: using lines 43 (SDA) and 42 (SCL) [ 3.490119] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 3.493967] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 3.493987] [vc_sm_connected_init]: start [ 3.496260] [vc_sm_connected_init]: installed successfully [ 3.505400] media: Linux media interface: v0.10 [ 3.560098] videodev: Linux video capture interface: v2.00 [ 3.608354] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 3.610826] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 3.617899] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 3.626601] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 3.641309] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 3.641323] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 3.658240] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 3.658257] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 3.673677] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 3.673691] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 3.682523] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 3.725055] bcm2835_audio soc:audio: card created with 8 channels [ 3.805705] Bluetooth: Core ver 2.22 [ 3.805786] NET: Registered protocol family 31 [ 3.805793] Bluetooth: HCI device and connection manager initialized [ 3.805818] Bluetooth: HCI socket layer initialized [ 3.805834] Bluetooth: L2CAP socket layer initialized [ 3.805878] Bluetooth: SCO socket layer initialized [ 3.832532] bt8xxx: loading out-of-tree module taints kernel. [ 3.839920] BT: Loading driver [ 3.967014] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.061628] BT Request firmware: mrvl/sd8887_uapsta_a2.bin [ 4.097420] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.164312] mlan: module license 'Marvell Proprietary' taints kernel. [ 4.164324] Disabling lock debugging due to kernel taint [ 4.314464] wlan: Loading MWLAN driver [ 4.520721] asix 1-1.5:1.0 eth1: register 'asix' at usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:8f:11:81 [ 4.524161] usbcore: registered new interface driver asix [ 4.603894] random: crng init done [ 4.603917] random: 7 urandom warning(s) missed due to ratelimiting [ 5.048452] BT: FW download over, size 616840 bytes [ 5.658285] BT FW is active(6) [ 5.695833] BT: Driver loaded successfully [ 5.724271] CMD_RESP: cmd 0x23a error, result=0x2 [ 5.724855] creating custom regulatory domain failed [ 5.729975] get_channel when STA is not connected [ 5.862992] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS [ 5.874476] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 5.874668] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.876892] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 6.271464] get_channel when STA is not connected [ 6.272743] get_channel when STA is not connected [ 6.274187] get_channel when STA is not connected [ 6.274733] get_channel when STA is not connected [ 6.276398] get_channel when STA is not connected [ 6.277184] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 6.286747] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 6.286757] Bluetooth: BNEP filters: protocol multicast [ 6.286773] Bluetooth: BNEP socket layer initialized [ 6.432041] Bluetooth: RFCOMM TTY layer initialized [ 6.432072] Bluetooth: RFCOMM socket layer initialized [ 6.432093] Bluetooth: RFCOMM ver 1.11 [ 7.673343] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 7.676270] asix 1-1.5:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 10.782199] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 12.015001] fuse init (API version 7.27) [33544.152065] INFO: task jbd2/mmcblk0p2-:75 blocked for more than 120 seconds. [33544.152080] Tainted: P C O 4.19.66-v7+ #1253 [33544.152086] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [33544.152094] jbd2/mmcblk0p2- D 0 75 2 0x00000000 [33544.152141] [<80830934>] (__schedule) from [<80830fa4>] (schedule+0x50/0xa8) [33544.152160] [<80830fa4>] (schedule) from [<808314dc>] (io_schedule+0x20/0x40) [33544.152179] [<808314dc>] (io_schedule) from [<8083196c>] (bit_wait_io+0x1c/0x70) [33544.152198] [<8083196c>] (bit_wait_io) from [<80831590>] (__wait_on_bit+0x94/0xd0) [33544.152217] [<80831590>] (__wait_on_bit) from [<80831664>] (out_of_line_wait_on_bit+0x98/0xb4) [33544.152237] [<80831664>] (out_of_line_wait_on_bit) from [<802e5e70>] (__wait_on_buffer+0x40/0x44) [33544.152259] [<802e5e70>] (__wait_on_buffer) from [<803b0278>] (jbd2_journal_commit_transaction+0x1460/0x193c) [33544.152281] [<803b0278>] (jbd2_journal_commit_transaction) from [<803b5ebc>] (kjournald2+0x110/0x2d8) [33544.152302] [<803b5ebc>] (kjournald2) from [<8014253c>] (kthread+0x138/0x168) [33544.152322] [<8014253c>] (kthread) from [<801010ac>] (ret_from_fork+0x14/0x28) [33544.152330] Exception stack(0xb9103fb0 to 0xb9103ff8) [33544.152341] 3fa0: 00000000 00000000 00000000 00000000 [33544.152353] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [33544.152364] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [33544.152510] INFO: task kworker/2:2:4582 blocked for more than 120 seconds. [33544.152518] Tainted: P C O 4.19.66-v7+ #1253 [33544.152523] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [33544.152528] kworker/2:2 D 0 4582 2 0x00000000 [33544.152552] Workqueue: events_freezable mmc_rescan [33544.152577] [<80830934>] (__schedule) from [<80830fa4>] (schedule+0x50/0xa8) [33544.152595] [<80830fa4>] (schedule) from [<80686520>] (__mmc_claim_host+0x120/0x228) [33544.152612] [<80686520>] (__mmc_claim_host) from [<80686660>] (mmc_get_card+0x38/0x3c) [33544.152628] [<80686660>] (mmc_get_card) from [<8068b390>] (mmc_detect+0x24/0x7c) [33544.152647] [<8068b390>] (mmc_detect) from [<80688c88>] (mmc_rescan+0x1cc/0x39c) [33544.152664] [<80688c88>] (mmc_rescan) from [<8013bf0c>] (process_one_work+0x170/0x458) [33544.152681] [<8013bf0c>] (process_one_work) from [<8013c250>] (worker_thread+0x5c/0x5a4) [33544.152698] [<8013c250>] (worker_thread) from [<8014253c>] (kthread+0x138/0x168) [33544.152716] [<8014253c>] (kthread) from [<801010ac>] (ret_from_fork+0x14/0x28) [33544.152723] Exception stack(0xb93a9fb0 to 0xb93a9ff8) [33544.152733] 9fa0: 00000000 00000000 00000000 00000000 [33544.152745] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [33544.152756] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [33667.032078] INFO: task jbd2/mmcblk0p2-:75 blocked for more than 120 seconds. [33667.032092] Tainted: P C O 4.19.66-v7+ #1253 [33667.032098] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [33667.032106] jbd2/mmcblk0p2- D 0 75 2 0x00000000 [33667.032152] [<80830934>] (__schedule) from [<80830fa4>] (schedule+0x50/0xa8) [33667.032172] [<80830fa4>] (schedule) from [<808314dc>] (io_schedule+0x20/0x40) [33667.032191] [<808314dc>] (io_schedule) from [<8083196c>] (bit_wait_io+0x1c/0x70) [33667.032210] [<8083196c>] (bit_wait_io) from [<80831590>] (__wait_on_bit+0x94/0xd0) [33667.032229] [<80831590>] (__wait_on_bit) from [<80831664>] (out_of_line_wait_on_bit+0x98/0xb4) [33667.032249] [<80831664>] (out_of_line_wait_on_bit) from [<802e5e70>] (__wait_on_buffer+0x40/0x44) [33667.032271] [<802e5e70>] (__wait_on_buffer) from [<803b0278>] (jbd2_journal_commit_transaction+0x1460/0x193c) [33667.032294] [<803b0278>] (jbd2_journal_commit_transaction) from [<803b5ebc>] (kjournald2+0x110/0x2d8) [33667.032315] [<803b5ebc>] (kjournald2) from [<8014253c>] (kthread+0x138/0x168) [33667.032335] [<8014253c>] (kthread) from [<801010ac>] (ret_from_fork+0x14/0x28) [33667.032343] Exception stack(0xb9103fb0 to 0xb9103ff8) [33667.032353] 3fa0: 00000000 00000000 00000000 00000000 [33667.032366] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [33667.032377] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [33667.032529] INFO: task kworker/2:2:4582 blocked for more than 120 seconds. [33667.032543] Tainted: P C O 4.19.66-v7+ #1253 [33667.032551] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [33667.032562] kworker/2:2 D 0 4582 2 0x00000000 [33667.032590] Workqueue: events_freezable mmc_rescan [33667.032616] [<80830934>] (__schedule) from [<80830fa4>] (schedule+0x50/0xa8) [33667.032633] [<80830fa4>] (schedule) from [<80686520>] (__mmc_claim_host+0x120/0x228) [33667.032650] [<80686520>] (__mmc_claim_host) from [<80686660>] (mmc_get_card+0x38/0x3c) [33667.032667] [<80686660>] (mmc_get_card) from [<8068b390>] (mmc_detect+0x24/0x7c) [33667.032685] [<8068b390>] (mmc_detect) from [<80688c88>] (mmc_rescan+0x1cc/0x39c) [33667.032702] [<80688c88>] (mmc_rescan) from [<8013bf0c>] (process_one_work+0x170/0x458) [33667.032719] [<8013bf0c>] (process_one_work) from [<8013c250>] (worker_thread+0x5c/0x5a4) [33667.032737] [<8013c250>] (worker_thread) from [<8014253c>] (kthread+0x138/0x168) [33667.032754] [<8014253c>] (kthread) from [<801010ac>] (ret_from_fork+0x14/0x28) [33667.032761] Exception stack(0xb93a9fb0 to 0xb93a9ff8) [33667.032771] 9fa0: 00000000 00000000 00000000 00000000 [33667.032783] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [33667.032794] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [33789.912101] INFO: task jbd2/mmcblk0p2-:75 blocked for more than 120 seconds. [33789.912116] Tainted: P C O 4.19.66-v7+ #1253 [33789.912121] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [33789.912129] jbd2/mmcblk0p2- D 0 75 2 0x00000000 [33789.912176] [<80830934>] (__schedule) from [<80830fa4>] (schedule+0x50/0xa8) [33789.912196] [<80830fa4>] (schedule) from [<808314dc>] (io_schedule+0x20/0x40) [33789.912215] [<808314dc>] (io_schedule) from [<8083196c>] (bit_wait_io+0x1c/0x70) [33789.912234] [<8083196c>] (bit_wait_io) from [<80831590>] (__wait_on_bit+0x94/0xd0) [33789.912253] [<80831590>] (__wait_on_bit) from [<80831664>] (out_of_line_wait_on_bit+0x98/0xb4) [33789.912273] [<80831664>] (out_of_line_wait_on_bit) from [<802e5e70>] (__wait_on_buffer+0x40/0x44) [33789.912295] [<802e5e70>] (__wait_on_buffer) from [<803b0278>] (jbd2_journal_commit_transaction+0x1460/0x193c) [33789.912317] [<803b0278>] (jbd2_journal_commit_transaction) from [<803b5ebc>] (kjournald2+0x110/0x2d8) [33789.912339] [<803b5ebc>] (kjournald2) from [<8014253c>] (kthread+0x138/0x168) [33789.912359] [<8014253c>] (kthread) from [<801010ac>] (ret_from_fork+0x14/0x28) [33789.912367] Exception stack(0xb9103fb0 to 0xb9103ff8) [33789.912377] 3fa0: 00000000 00000000 00000000 00000000 [33789.912390] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [33789.912401] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [33789.912545] INFO: task kworker/2:2:4582 blocked for more than 120 seconds. [33789.912553] Tainted: P C O 4.19.66-v7+ #1253 [33789.912558] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [33789.912564] kworker/2:2 D 0 4582 2 0x00000000 [33789.912588] Workqueue: events_freezable mmc_rescan [33789.912612] [<80830934>] (__schedule) from [<80830fa4>] (schedule+0x50/0xa8) [33789.912629] [<80830fa4>] (schedule) from [<80686520>] (__mmc_claim_host+0x120/0x228) [33789.912646] [<80686520>] (__mmc_claim_host) from [<80686660>] (mmc_get_card+0x38/0x3c) [33789.912663] [<80686660>] (mmc_get_card) from [<8068b390>] (mmc_detect+0x24/0x7c) [33789.912681] [<8068b390>] (mmc_detect) from [<80688c88>] (mmc_rescan+0x1cc/0x39c) [33789.912700] [<80688c88>] (mmc_rescan) from [<8013bf0c>] (process_one_work+0x170/0x458) [33789.912717] [<8013bf0c>] (process_one_work) from [<8013c250>] (worker_thread+0x5c/0x5a4) [33789.912734] [<8013c250>] (worker_thread) from [<8014253c>] (kthread+0x138/0x168) [33789.912751] [<8014253c>] (kthread) from [<801010ac>] (ret_from_fork+0x14/0x28) [33789.912758] Exception stack(0xb93a9fb0 to 0xb93a9ff8) [33789.912769] 9fa0: 00000000 00000000 00000000 00000000 [33789.912781] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [33789.912792] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [33912.792072] INFO: task jbd2/mmcblk0p2-:75 blocked for more than 120 seconds. [33912.792086] Tainted: P C O 4.19.66-v7+ #1253 [33912.792091] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [33912.792099] jbd2/mmcblk0p2- D 0 75 2 0x00000000 [33912.792146] [<80830934>] (__schedule) from [<80830fa4>] (schedule+0x50/0xa8) [33912.792165] [<80830fa4>] (schedule) from [<808314dc>] (io_schedule+0x20/0x40) [33912.792184] [<808314dc>] (io_schedule) from [<8083196c>] (bit_wait_io+0x1c/0x70) [33912.792203] [<8083196c>] (bit_wait_io) from [<80831590>] (__wait_on_bit+0x94/0xd0) [33912.792222] [<80831590>] (__wait_on_bit) from [<80831664>] (out_of_line_wait_on_bit+0x98/0xb4) [33912.792242] [<80831664>] (out_of_line_wait_on_bit) from [<802e5e70>] (__wait_on_buffer+0x40/0x44) [33912.792264] [<802e5e70>] (__wait_on_buffer) from [<803b0278>] (jbd2_journal_commit_transaction+0x1460/0x193c) [33912.792287] [<803b0278>] (jbd2_journal_commit_transaction) from [<803b5ebc>] (kjournald2+0x110/0x2d8) [33912.792309] [<803b5ebc>] (kjournald2) from [<8014253c>] (kthread+0x138/0x168) [33912.792329] [<8014253c>] (kthread) from [<801010ac>] (ret_from_fork+0x14/0x28) [33912.792337] Exception stack(0xb9103fb0 to 0xb9103ff8) [33912.792348] 3fa0: 00000000 00000000 00000000 00000000 [33912.792360] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [33912.792371] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [33912.792517] INFO: task kworker/2:2:4582 blocked for more than 120 seconds. [33912.792525] Tainted: P C O 4.19.66-v7+ #1253 [33912.792530] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [33912.792536] kworker/2:2 D 0 4582 2 0x00000000 [33912.792560] Workqueue: events_freezable mmc_rescan [33912.792585] [<80830934>] (__schedule) from [<80830fa4>] (schedule+0x50/0xa8) [33912.792603] [<80830fa4>] (schedule) from [<80686520>] (__mmc_claim_host+0x120/0x228) [33912.792619] [<80686520>] (__mmc_claim_host) from [<80686660>] (mmc_get_card+0x38/0x3c) [33912.792636] [<80686660>] (mmc_get_card) from [<8068b390>] (mmc_detect+0x24/0x7c) [33912.792654] [<8068b390>] (mmc_detect) from [<80688c88>] (mmc_rescan+0x1cc/0x39c) [33912.792671] [<80688c88>] (mmc_rescan) from [<8013bf0c>] (process_one_work+0x170/0x458) [33912.792689] [<8013bf0c>] (process_one_work) from [<8013c250>] (worker_thread+0x5c/0x5a4) [33912.792706] [<8013c250>] (worker_thread) from [<8014253c>] (kthread+0x138/0x168) [33912.792722] [<8014253c>] (kthread) from [<801010ac>] (ret_from_fork+0x14/0x28) [33912.792730] Exception stack(0xb93a9fb0 to 0xb93a9ff8) [33912.792740] 9fa0: 00000000 00000000 00000000 00000000 [33912.792752] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [33912.792763] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [34035.672127] INFO: task jbd2/mmcblk0p2-:75 blocked for more than 120 seconds. [34035.672142] Tainted: P C O 4.19.66-v7+ #1253 [34035.672148] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [34035.672156] jbd2/mmcblk0p2- D 0 75 2 0x00000000 [34035.672206] [<80830934>] (__schedule) from [<80830fa4>] (schedule+0x50/0xa8) [34035.672226] [<80830fa4>] (schedule) from [<808314dc>] (io_schedule+0x20/0x40) [34035.672245] [<808314dc>] (io_schedule) from [<8083196c>] (bit_wait_io+0x1c/0x70) [34035.672264] [<8083196c>] (bit_wait_io) from [<80831590>] (__wait_on_bit+0x94/0xd0) [34035.672283] [<80831590>] (__wait_on_bit) from [<80831664>] (out_of_line_wait_on_bit+0x98/0xb4) [34035.672303] [<80831664>] (out_of_line_wait_on_bit) from [<802e5e70>] (__wait_on_buffer+0x40/0x44) [34035.672325] [<802e5e70>] (__wait_on_buffer) from [<803b0278>] (jbd2_journal_commit_transaction+0x1460/0x193c) [34035.672348] [<803b0278>] (jbd2_journal_commit_transaction) from [<803b5ebc>] (kjournald2+0x110/0x2d8) [34035.672371] [<803b5ebc>] (kjournald2) from [<8014253c>] (kthread+0x138/0x168) [34035.672391] [<8014253c>] (kthread) from [<801010ac>] (ret_from_fork+0x14/0x28) [34035.672400] Exception stack(0xb9103fb0 to 0xb9103ff8) [34035.672410] 3fa0: 00000000 00000000 00000000 00000000 [34035.672422] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [34035.672433] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [34035.672581] INFO: task kworker/2:2:4582 blocked for more than 120 seconds. [34035.672589] Tainted: P C O 4.19.66-v7+ #1253 [34035.672594] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [34035.672600] kworker/2:2 D 0 4582 2 0x00000000 [34035.672624] Workqueue: events_freezable mmc_rescan [34035.672650] [<80830934>] (__schedule) from [<80830fa4>] (schedule+0x50/0xa8) [34035.672667] [<80830fa4>] (schedule) from [<80686520>] (__mmc_claim_host+0x120/0x228) [34035.672684] [<80686520>] (__mmc_claim_host) from [<80686660>] (mmc_get_card+0x38/0x3c) [34035.672701] [<80686660>] (mmc_get_card) from [<8068b390>] (mmc_detect+0x24/0x7c) [34035.672720] [<8068b390>] (mmc_detect) from [<80688c88>] (mmc_rescan+0x1cc/0x39c) [34035.672737] [<80688c88>] (mmc_rescan) from [<8013bf0c>] (process_one_work+0x170/0x458) [34035.672754] [<8013bf0c>] (process_one_work) from [<8013c250>] (worker_thread+0x5c/0x5a4) [34035.672771] [<8013c250>] (worker_thread) from [<8014253c>] (kthread+0x138/0x168) [34035.672788] [<8014253c>] (kthread) from [<801010ac>] (ret_from_fork+0x14/0x28) [34035.672795] Exception stack(0xb93a9fb0 to 0xb93a9ff8) [34035.672805] 9fa0: 00000000 00000000 00000000 00000000 [34035.672818] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [34035.672828] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [48073.212668] kworker/2:0H invoked oom-killer: gfp_mask=0x6000c0(GFP_KERNEL), nodemask=(null), order=0, oom_score_adj=0 [48073.212676] kworker/2:0H cpuset=/ mems_allowed=0 [48073.212692] CPU: 2 PID: 23 Comm: kworker/2:0H Tainted: P C O 4.19.66-v7+ #1253 [48073.212694] Hardware name: BCM2835 [48073.212707] Workqueue: kblockd blk_mq_run_work_fn [48073.212726] [<80111f38>] (unwind_backtrace) from [<8010d4b0>] (show_stack+0x20/0x24) [48073.212736] [<8010d4b0>] (show_stack) from [<808191e0>] (dump_stack+0xd4/0x118) [48073.212748] [<808191e0>] (dump_stack) from [<8023cee0>] (dump_header+0x80/0x250) [48073.212758] [<8023cee0>] (dump_header) from [<8023c258>] (oom_kill_process+0x358/0x3a8) [48073.212767] [<8023c258>] (oom_kill_process) from [<8023cb88>] (out_of_memory+0x134/0x36c) [48073.212776] [<8023cb88>] (out_of_memory) from [<80242fe0>] (__alloc_pages_nodemask+0x1024/0x1178) [48073.212785] [<80242fe0>] (__alloc_pages_nodemask) from [<80292b7c>] (new_slab+0x520/0x6b4) [48073.212795] [<80292b7c>] (new_slab) from [<80294b3c>] (___slab_alloc.constprop.11+0x454/0x594) [48073.212804] [<80294b3c>] (___slab_alloc.constprop.11) from [<80294cc0>] (__slab_alloc.constprop.10+0x44/0x90) [48073.212813] [<80294cc0>] (__slab_alloc.constprop.10) from [<80294f64>] (__kmalloc+0x258/0x288) [48073.212822] [<80294f64>] (__kmalloc) from [<8055c700>] (bcm2835_dma_create_cb_chain+0x54/0x3d4) [48073.212831] [<8055c700>] (bcm2835_dma_create_cb_chain) from [<8055cf58>] (bcm2835_dma_prep_slave_sg+0x120/0x300) [48073.212840] [<8055cf58>] (bcm2835_dma_prep_slave_sg) from [<806a732c>] (bcm2835_sdhost_request+0x2c4/0x628) [48073.212850] [<806a732c>] (bcm2835_sdhost_request) from [<80685f30>] (__mmc_start_request+0x78/0x198) [48073.212859] [<80685f30>] (__mmc_start_request) from [<80686b2c>] (mmc_start_request+0x9c/0xc0) [48073.212868] [<80686b2c>] (mmc_start_request) from [<8069af24>] (mmc_blk_mq_issue_rq+0x730/0x89c) [48073.212878] [<8069af24>] (mmc_blk_mq_issue_rq) from [<8069b5b4>] (mmc_mq_queue_rq+0x1a8/0x27c) [48073.212888] [<8069b5b4>] (mmc_mq_queue_rq) from [<804d18a8>] (blk_mq_dispatch_rq_list+0xec/0x5ac) [48073.212898] [<804d18a8>] (blk_mq_dispatch_rq_list) from [<804d64b0>] (blk_mq_do_dispatch_sched+0x84/0x10c) [48073.212906] [<804d64b0>] (blk_mq_do_dispatch_sched) from [<804d6c20>] (blk_mq_sched_dispatch_requests+0x120/0x18c) [48073.212914] [<804d6c20>] (blk_mq_sched_dispatch_requests) from [<804cfdac>] (__blk_mq_run_hw_queue+0xb0/0x15c) [48073.212923] [<804cfdac>] (__blk_mq_run_hw_queue) from [<804d0070>] (blk_mq_run_work_fn+0x28/0x2c) [48073.212932] [<804d0070>] (blk_mq_run_work_fn) from [<8013bf0c>] (process_one_work+0x170/0x458) [48073.212941] [<8013bf0c>] (process_one_work) from [<8013c470>] (worker_thread+0x27c/0x5a4) [48073.212950] [<8013c470>] (worker_thread) from [<8014253c>] (kthread+0x138/0x168) [48073.212959] [<8014253c>] (kthread) from [<801010ac>] (ret_from_fork+0x14/0x28) [48073.212963] Exception stack(0xb9d7bfb0 to 0xb9d7bff8) [48073.212968] bfa0: 00000000 00000000 00000000 00000000 [48073.212974] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [48073.212979] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 [48073.212982] Mem-Info: [48073.212994] active_anon:108325 inactive_anon:108398 isolated_anon:0 active_file:339 inactive_file:346 isolated_file:0 unevictable:0 dirty:0 writeback:0 unstable:0 slab_reclaimable:2512 slab_unreclaimable:4331 mapped:2046 shmem:21416 pagetables:2316 bounce:0 free:5202 free_pcp:412 free_cma:1506 [48073.213003] Node 0 active_anon:433300kB inactive_anon:433592kB active_file:1356kB inactive_file:1384kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:8184kB dirty:0kB writeback:0kB shmem:85664kB writeback_tmp:0kB unstable:0kB all_unreclaimable? yes [48073.213016] Normal free:20808kB min:16384kB low:20480kB high:24576kB active_anon:433300kB inactive_anon:433592kB active_file:1356kB inactive_file:1384kB unevictable:0kB writepending:0kB present:970752kB managed:948304kB mlocked:0kB kernel_stack:2392kB pagetables:9264kB bounce:0kB free_pcp:1648kB local_pcp:1420kB free_cma:6024kB [48073.213018] lowmem_reserve[]: 0 0 [48073.213027] Normal: 1036*4kB (UMEC) 431*8kB (UME) 196*16kB (UMEC) 57*32kB (UMEC) 13*64kB (MEC) 4*128kB (UE) 3*256kB (UC) 2*512kB (UC) 1*1024kB (C) 0*2048kB 1*4096kB (C) = 20808kB [48073.213083] 22179 total pagecache pages [48073.213087] 46 pages in swap cache [48073.213091] Swap cache stats: add 30606, delete 30560, find 5852/9467 [48073.213094] Free swap = 0kB [48073.213097] Total swap = 102396kB [48073.213099] 242688 pages RAM [48073.213102] 0 pages HighMem/MovableOnly [48073.213105] 5612 pages reserved [48073.213107] 2048 pages cma reserved [48073.213110] Tasks state (memory values in pages): [48073.213113] [ pid ] uid tgid total_vm rss pgtables_bytes swapents oom_score_adj name [48073.213134] [ 100] 0 100 6752 361 22528 69 0 systemd-journal [48073.213140] [ 135] 0 135 3643 13 16384 156 -1000 systemd-udevd [48073.213149] [ 316] 100 316 4319 52 20480 61 0 systemd-timesyn [48073.213155] [ 350] 0 350 1012 17 12288 36 0 cron [48073.213161] [ 352] 0 352 1853 29 16384 85 0 systemd-logind [48073.213168] [ 353] 0 353 5939 85 18432 106 0 rsyslogd [48073.213174] [ 356] 105 356 1655 82 16384 69 -900 dbus-daemon [48073.213181] [ 363] 0 363 2500 11 16384 84 0 wpa_supplicant [48073.213187] [ 364] 65534 364 1324 4 14336 55 0 thd [48073.213194] [ 365] 108 365 1599 42 14336 47 0 avahi-daemon [48073.213200] [ 375] 108 375 1599 15 12288 60 0 avahi-daemon [48073.213206] [ 381] 0 381 767 13 12288 103 0 dhcpcd [48073.213213] [ 389] 0 389 1114 0 12288 62 0 vncserver-x11-s [48073.213220] [ 429] 0 429 6852 189 32768 188 0 vncserver-x11-c [48073.213226] [ 434] 0 434 1818 0 16384 81 0 bluetoothd [48073.213233] [ 440] 0 440 9351 20 28672 136 0 lightdm [48073.213239] [ 453] 0 453 8761 0 26624 107 0 bluealsa [48073.213246] [ 466] 0 466 2552 0 20480 135 -1000 sshd [48073.213253] [ 473] 0 473 2642 33 18432 98 0 wpa_supplicant [48073.213259] [ 486] 0 486 679 0 10240 32 0 agetty [48073.213265] [ 487] 0 487 1469 2 12288 114 0 login [48073.213272] [ 489] 0 489 54338 5085 172032 4867 0 Xorg [48073.213278] [ 490] 0 490 973 0 12288 56 0 bash [48073.213284] [ 491] 0 491 6983 1949 36864 1828 0 python3 [48073.213290] [ 500] 0 500 1883 5 14336 129 0 vncagent [48073.213297] [ 513] 0 513 7409 20 22528 151 0 lightdm [48073.213303] [ 521] 1000 521 2439 50 16384 140 0 systemd [48073.213310] [ 524] 1000 524 2814 19 16384 286 0 (sd-pam) [48073.213316] [ 529] 1000 529 12397 16 38912 285 0 lxsession [48073.213323] [ 538] 1000 538 1626 15 14336 87 0 dbus-daemon [48073.213329] [ 579] 1000 579 948 10 10240 42 0 ssh-agent [48073.213335] [ 586] 1000 586 9555 11 30720 136 0 gvfsd [48073.213341] [ 591] 1000 591 13567 0 28672 154 0 gvfsd-fuse [48073.213347] [ 602] 1000 602 12993 107 36864 482 0 openbox [48073.213354] [ 607] 1000 607 10434 0 38912 261 0 lxpolkit [48073.213360] [ 611] 1000 611 35205 705 75776 788 0 lxpanel [48073.213367] [ 614] 1000 614 26837 0 59392 840 0 pcmanfm [48073.213373] [ 621] 1000 621 948 0 12288 52 0 ssh-agent [48073.213379] [ 628] 0 628 9418 0 26624 160 0 polkitd [48073.213385] [ 652] 1000 652 1240 1 14336 322 0 bash [48073.213392] [ 658] 1000 658 18266 0 36864 299 0 gvfs-udisks2-vo [48073.213398] [ 662] 0 662 14196 86 32768 312 0 udisksd [48073.213405] [ 666] 1000 666 6518 2 18432 114 0 menu-cached [48073.213411] [ 688] 1000 688 6728 112 32768 430 0 vncserverui [48073.213417] [ 693] 1000 693 9352 0 24576 162 0 gvfs-gphoto2-vo [48073.213424] [ 697] 1000 697 8979 2 26624 117 0 gvfs-goa-volume [48073.213430] [ 701] 1000 701 8961 0 26624 133 0 gvfs-mtp-volume [48073.213436] [ 705] 1000 705 12411 0 36864 190 0 gvfs-afc-volume [48073.213442] [ 711] 1000 711 6563 149 34816 250 0 vncserverui [48073.213448] [ 713] 1000 713 11944 0 34816 173 0 gvfsd-trash [48073.213455] [ 903] 1000 903 167502 10379 466944 3976 0 chromium-browse [48073.213462] [ 924] 1000 924 46556 281 141312 1082 0 chromium-browse [48073.213468] [ 926] 1000 926 46556 310 86016 1063 0 chromium-browse [48073.213474] [ 959] 1000 959 74941 919 204800 2394 200 chromium-browse [48073.213481] [ 1069] 1000 1069 92075 11281 364544 1065 300 chromium-browse [48073.213487] [ 1174] 1000 1174 233822 137975 1267712 1244 300 chromium-browse [48073.213493] [ 1197] 1000 1197 14289 153 38912 0 0 gvfsd-network [48073.213500] [ 1205] 1000 1205 22069 467 51200 0 0 gvfsd-smb-brows [48073.213506] [ 1213] 1000 1213 12228 156 36864 0 0 gvfsd-dnssd [48073.213513] [ 1220] 1000 1220 6387 92 20480 0 0 dconf-service [48073.213519] [ 1223] 1000 1223 117281 25071 546816 1027 300 chromium-browse [48073.213525] [ 1290] 1000 1290 11205 811 40960 0 0 lxterminal [48073.213532] [ 1291] 1000 1291 587 33 12288 0 0 gnome-pty-helpe [48073.213538] [ 1292] 1000 1292 1242 332 12288 0 0 bash [48073.213547] [ 4692] 0 4692 1378 63 12288 22 0 cron [48073.213553] [ 4721] 0 4721 472 19 12288 0 0 sh [48073.213559] [ 4722] 0 4722 452 21 10240 0 0 run-parts [48073.213566] [ 4830] 0 4830 472 18 12288 0 0 logrotate [48073.213572] [ 4831] 0 4831 986 53 14336 0 0 logrotate [48073.213579] [ 5392] 0 5392 1381 68 12288 11 0 cron [48073.213585] Out of memory: Kill process 1174 (chromium-browse) score 830 or sacrifice child [48073.213645] Killed process 1174 (chromium-browse) total-vm:935288kB, anon-rss:551900kB, file-rss:0kB, shmem-rss:0kB [48073.353394] oom_reaper: reaped process 1174 (chromium-browse), now anon-rss:0kB, file-rss:0kB, shmem-rss:96kB [236727.452661] ERROR::dwc_otg_hcd_urb_enqueue:491: Not connected [236727.502855] usb 1-1: USB disconnect, device number 2 [236727.502872] usb 1-1.1: USB disconnect, device number 3 [236727.503233] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet [236727.503343] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [236727.563518] usb 1-1.5: USB disconnect, device number 4 [236727.563864] asix 1-1.5:1.0 eth1: unregister 'asix' usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet [236733.352748] Indeed it is in host mode hprt0 = 00021501 [236733.562655] usb 1-1: new high-speed USB device number 5 using dwc_otg [236733.562737] Indeed it is in host mode hprt0 = 00001101 [236733.802805] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [236733.802815] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [236733.805136] hub 1-1:1.0: USB hub found [236733.805232] hub 1-1:1.0: 5 ports detected [236734.122650] usb 1-1.1: new high-speed USB device number 6 using dwc_otg [236734.252987] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [236734.253004] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [236734.258500] smsc95xx v1.0.6 [236734.347872] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:36:1e [236734.443513] usb 1-1.5: new high-speed USB device number 7 using dwc_otg [236734.585074] usb 1-1.5: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01 [236734.585091] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [236734.585100] usb 1-1.5: Product: AX88772B [236734.585110] usb 1-1.5: Manufacturer: ASIX Elec. Corp. [236734.585119] usb 1-1.5: SerialNumber: 0016FE [236734.596250] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [236734.596690] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [236735.037196] asix 1-1.5:1.0 eth1: register 'asix' at usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:8f:11:81 [236735.207740] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [236738.028313] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [236738.033691] asix 1-1.5:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [236853.252845] usb 1-1: USB disconnect, device number 5 [236853.252863] usb 1-1.1: USB disconnect, device number 6 [236853.253189] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet [236853.253300] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [236853.303787] usb 1-1.5: USB disconnect, device number 7 [236853.304115] asix 1-1.5:1.0 eth1: unregister 'asix' usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet [236856.552754] Indeed it is in host mode hprt0 = 00021501 [236856.762650] usb 1-1: new high-speed USB device number 8 using dwc_otg [236856.762729] Indeed it is in host mode hprt0 = 00001101 [236857.002838] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [236857.002847] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [236857.005069] hub 1-1:1.0: USB hub found [236857.005174] hub 1-1:1.0: 5 ports detected [236857.322658] usb 1-1.1: new high-speed USB device number 9 using dwc_otg [236857.452965] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [236857.452982] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [236857.455863] smsc95xx v1.0.6 [236857.546480] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:36:1e [236857.642757] usb 1-1.5: new high-speed USB device number 10 using dwc_otg [236857.743919] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [236857.744243] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [236857.794856] usb 1-1.5: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01 [236857.794866] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [236857.794871] usb 1-1.5: Product: AX88772B [236857.794876] usb 1-1.5: Manufacturer: ASIX Elec. Corp. [236857.794880] usb 1-1.5: SerialNumber: 0016FE [236858.246196] asix 1-1.5:1.0 eth1: register 'asix' at usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:8f:11:81 [236858.336256] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [236861.156129] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [236861.160451] asix 1-1.5:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [236965.412657] ERROR::dwc_otg_hcd_urb_enqueue:491: Not connected [236965.502843] usb 1-1: USB disconnect, device number 8 [236965.502860] usb 1-1.1: USB disconnect, device number 9 [236965.503185] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet [236965.503295] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [236965.543948] usb 1-1.5: USB disconnect, device number 10 [236965.544256] asix 1-1.5:1.0 eth1: unregister 'asix' usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet [236970.802751] Indeed it is in host mode hprt0 = 00021501 [236971.012688] usb 1-1: new high-speed USB device number 11 using dwc_otg [236971.012824] Indeed it is in host mode hprt0 = 00001101 [236971.253009] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [236971.253025] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [236971.253718] hub 1-1:1.0: USB hub found [236971.253814] hub 1-1:1.0: 5 ports detected [236971.572700] usb 1-1.1: new high-speed USB device number 12 using dwc_otg [236971.702959] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [236971.702975] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [236971.705864] smsc95xx v1.0.6 [236971.796619] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:36:1e [236971.902748] usb 1-1.5: new high-speed USB device number 13 using dwc_otg [236971.993868] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [236971.994130] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [236972.054831] usb 1-1.5: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01 [236972.054841] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [236972.054846] usb 1-1.5: Product: AX88772B [236972.054851] usb 1-1.5: Manufacturer: ASIX Elec. Corp. [236972.054856] usb 1-1.5: SerialNumber: 0016FE [236972.506233] asix 1-1.5:1.0 eth1: register 'asix' at usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:8f:11:81 [236972.593319] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [236975.541291] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [236975.544782] asix 1-1.5:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [237083.502853] usb 1-1: USB disconnect, device number 11 [237083.502870] usb 1-1.1: USB disconnect, device number 12 [237083.503194] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet [237083.503302] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [237083.553605] usb 1-1.5: USB disconnect, device number 13 [237083.553905] asix 1-1.5:1.0 eth1: unregister 'asix' usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet [237089.762741] usb usb1-port1: connect-debounce failed [237090.252783] Indeed it is in host mode hprt0 = 00021501 [237090.462706] usb 1-1: new high-speed USB device number 14 using dwc_otg [237090.462839] Indeed it is in host mode hprt0 = 00001101 [237090.702804] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [237090.702812] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [237090.703245] hub 1-1:1.0: USB hub found [237090.703296] hub 1-1:1.0: 5 ports detected [237091.022650] usb 1-1.1: new high-speed USB device number 15 using dwc_otg [237091.152827] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [237091.152837] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [237091.155383] smsc95xx v1.0.6 [237091.254856] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:36:1e [237091.352821] usb 1-1.5: new high-speed USB device number 16 using dwc_otg [237091.454841] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [237091.455252] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [237091.495176] usb 1-1.5: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01 [237091.495194] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [237091.495204] usb 1-1.5: Product: AX88772B [237091.495213] usb 1-1.5: Manufacturer: ASIX Elec. Corp. [237091.495222] usb 1-1.5: SerialNumber: 0016FE [237091.947251] asix 1-1.5:1.0 eth1: register 'asix' at usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:8f:11:81 [237092.103390] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [237094.923471] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [237094.926466] asix 1-1.5:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [237204.252848] usb 1-1: USB disconnect, device number 14 [237204.252866] usb 1-1.1: USB disconnect, device number 15 [237204.253189] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet [237204.253297] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [237204.333652] usb 1-1.5: USB disconnect, device number 16 [237204.333958] asix 1-1.5:1.0 eth1: unregister 'asix' usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet [237209.402757] Indeed it is in host mode hprt0 = 00021501 [237209.612660] usb 1-1: new high-speed USB device number 17 using dwc_otg [237209.612744] Indeed it is in host mode hprt0 = 00001101 [237209.852808] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [237209.852817] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [237209.853230] hub 1-1:1.0: USB hub found [237209.853287] hub 1-1:1.0: 5 ports detected [237210.172654] usb 1-1.1: new high-speed USB device number 18 using dwc_otg [237210.303036] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [237210.303052] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [237210.305953] smsc95xx v1.0.6 [237210.396509] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:36:1e [237210.492794] usb 1-1.5: new high-speed USB device number 19 using dwc_otg [237210.625941] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [237210.626402] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [237210.636087] usb 1-1.5: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01 [237210.636106] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [237210.636115] usb 1-1.5: Product: AX88772B [237210.636125] usb 1-1.5: Manufacturer: ASIX Elec. Corp. [237210.636134] usb 1-1.5: SerialNumber: 0016FE [237211.087211] asix 1-1.5:1.0 eth1: register 'asix' at usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:8f:11:81 [237211.237891] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [237214.058123] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [237214.061157] asix 1-1.5:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [237289.362655] ERROR::dwc_otg_hcd_urb_enqueue:491: Not connected [237289.432740] ERROR::dwc_otg_hcd_urb_enqueue:491: Not connected [237289.432766] smsc95xx 1-1.1:1.0 eth0: Failed to read reg index 0x00000114: -19 [237289.432776] smsc95xx 1-1.1:1.0 eth0: Error reading MII_ACCESS [237289.432786] smsc95xx 1-1.1:1.0 eth0: MII is busy in smsc95xx_mdio_read [237289.432795] smsc95xx 1-1.1:1.0 eth0: Failed to read MII_BMSR [237289.502869] usb 1-1: USB disconnect, device number 17 [237289.502885] usb 1-1.1: USB disconnect, device number 18 [237289.503204] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet [237289.503312] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [237289.573559] usb 1-1.5: USB disconnect, device number 19 [237289.573861] asix 1-1.5:1.0 eth1: unregister 'asix' usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet [237293.102752] Indeed it is in host mode hprt0 = 00021501 [237293.312654] usb 1-1: new high-speed USB device number 20 using dwc_otg [237293.312733] Indeed it is in host mode hprt0 = 00001101 [237293.552806] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [237293.552815] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [237293.553230] hub 1-1:1.0: USB hub found [237293.553281] hub 1-1:1.0: 5 ports detected [237293.872742] usb 1-1.1: new high-speed USB device number 21 using dwc_otg [237294.002971] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [237294.002987] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [237294.005912] smsc95xx v1.0.6 [237294.096597] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:36:1e [237294.192757] usb 1-1.5: new high-speed USB device number 22 using dwc_otg [237294.284109] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [237294.284459] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [237294.334853] usb 1-1.5: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01 [237294.334863] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [237294.334868] usb 1-1.5: Product: AX88772B [237294.334873] usb 1-1.5: Manufacturer: ASIX Elec. Corp. [237294.334878] usb 1-1.5: SerialNumber: 0016FE [237294.786209] asix 1-1.5:1.0 eth1: register 'asix' at usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:8f:11:81 [237294.867361] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [237297.816092] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [237297.819007] asix 1-1.5:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [237368.240626] ERROR::dwc_otg_hcd_urb_enqueue:491: Not connected [237368.252886] usb 1-1: USB disconnect, device number 20 [237368.252902] usb 1-1.1: USB disconnect, device number 21 [237368.253230] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet [237368.253338] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [237368.313545] usb 1-1.5: USB disconnect, device number 22 [237368.313846] asix 1-1.5:1.0 eth1: unregister 'asix' usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet [237372.652758] Indeed it is in host mode hprt0 = 00021501 [237372.862657] usb 1-1: new high-speed USB device number 23 using dwc_otg [237372.862734] Indeed it is in host mode hprt0 = 00001101 [237373.102801] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [237373.102809] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [237373.103202] hub 1-1:1.0: USB hub found [237373.103260] hub 1-1:1.0: 5 ports detected [237373.422661] usb 1-1.1: new high-speed USB device number 24 using dwc_otg [237373.552955] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [237373.552972] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [237373.555876] smsc95xx v1.0.6 [237373.646295] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:36:1e [237373.742750] usb 1-1.5: new high-speed USB device number 25 using dwc_otg [237373.843860] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [237373.844036] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [237373.894838] usb 1-1.5: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01 [237373.894848] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [237373.894852] usb 1-1.5: Product: AX88772B [237373.894857] usb 1-1.5: Manufacturer: ASIX Elec. Corp. [237373.894862] usb 1-1.5: SerialNumber: 0016FE [237374.346223] asix 1-1.5:1.0 eth1: register 'asix' at usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:8f:11:81 [237374.426705] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [237377.119110] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [237377.122048] asix 1-1.5:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [237437.252855] usb 1-1: USB disconnect, device number 23 [237437.252873] usb 1-1.1: USB disconnect, device number 24 [237437.253198] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet [237437.253305] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [237437.313569] usb 1-1.5: USB disconnect, device number 25 [237437.313873] asix 1-1.5:1.0 eth1: unregister 'asix' usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet [237441.702757] Indeed it is in host mode hprt0 = 00021501 [237441.912700] usb 1-1: new high-speed USB device number 26 using dwc_otg [237441.912833] Indeed it is in host mode hprt0 = 00001101 [237442.153049] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [237442.153065] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [237442.156977] hub 1-1:1.0: USB hub found [237442.157162] hub 1-1:1.0: 5 ports detected [237442.472699] usb 1-1.1: new high-speed USB device number 27 using dwc_otg [237442.603016] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [237442.603033] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [237442.605961] smsc95xx v1.0.6 [237442.716430] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:36:1e [237442.812825] usb 1-1.5: new high-speed USB device number 28 using dwc_otg [237442.925244] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [237442.925637] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [237442.955209] usb 1-1.5: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01 [237442.955226] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [237442.955236] usb 1-1.5: Product: AX88772B [237442.955245] usb 1-1.5: Manufacturer: ASIX Elec. Corp. [237442.955254] usb 1-1.5: SerialNumber: 0016FE [237443.407337] asix 1-1.5:1.0 eth1: register 'asix' at usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:8f:11:81 [237443.558476] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [237446.378488] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [237446.381456] asix 1-1.5:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [237503.452458] ERROR::dwc_otg_hcd_urb_enqueue:491: Not connected [237503.502861] usb 1-1: USB disconnect, device number 26 [237503.502879] usb 1-1.1: USB disconnect, device number 27 [237503.503205] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet [237503.503382] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [237503.583555] usb 1-1.5: USB disconnect, device number 28 [237503.583852] asix 1-1.5:1.0 eth1: unregister 'asix' usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet [237508.352748] Indeed it is in host mode hprt0 = 00021501 [237508.562654] usb 1-1: new high-speed USB device number 29 using dwc_otg [237508.562735] Indeed it is in host mode hprt0 = 00001101 [237508.802809] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [237508.802819] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [237508.803206] hub 1-1:1.0: USB hub found [237508.803264] hub 1-1:1.0: 5 ports detected [237509.122658] usb 1-1.1: new high-speed USB device number 30 using dwc_otg [237509.252929] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [237509.252946] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [237509.255846] smsc95xx v1.0.6 [237509.346105] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:36:1e [237509.442793] usb 1-1.5: new high-speed USB device number 31 using dwc_otg [237509.554786] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [237509.555183] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [237509.595125] usb 1-1.5: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01 [237509.595142] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [237509.595152] usb 1-1.5: Product: AX88772B [237509.595161] usb 1-1.5: Manufacturer: ASIX Elec. Corp. [237509.595170] usb 1-1.5: SerialNumber: 0016FE [237510.057078] asix 1-1.5:1.0 eth1: register 'asix' at usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:8f:11:81 [237510.209773] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [237513.030117] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [237513.033137] asix 1-1.5:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [237575.172661] ERROR::dwc_otg_hcd_urb_enqueue:491: Not connected [237575.252851] usb 1-1: USB disconnect, device number 29 [237575.252868] usb 1-1.1: USB disconnect, device number 30 [237575.253193] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet [237575.253304] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [237575.313721] usb 1-1.5: USB disconnect, device number 31 [237575.314063] asix 1-1.5:1.0 eth1: unregister 'asix' usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet [237579.422762] Indeed it is in host mode hprt0 = 00021100 [237579.562748] Indeed it is in host mode hprt0 = 00001101 [237579.912658] usb 1-1: new high-speed USB device number 32 using dwc_otg [237579.912740] Indeed it is in host mode hprt0 = 00001101 [237580.152808] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [237580.152818] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [237580.153215] hub 1-1:1.0: USB hub found [237580.153267] hub 1-1:1.0: 5 ports detected [237580.472701] usb 1-1.1: new high-speed USB device number 33 using dwc_otg [237580.602987] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [237580.603003] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [237580.605909] smsc95xx v1.0.6 [237580.706523] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:36:1e [237580.802841] usb 1-1.5: new high-speed USB device number 34 using dwc_otg [237580.913814] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [237580.914063] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [237580.944890] usb 1-1.5: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01 [237580.944900] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [237580.944905] usb 1-1.5: Product: AX88772B [237580.944909] usb 1-1.5: Manufacturer: ASIX Elec. Corp. [237580.944914] usb 1-1.5: SerialNumber: 0016FE [237581.396222] asix 1-1.5:1.0 eth1: register 'asix' at usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:8f:11:81 [237581.478289] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [237584.171144] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [237584.174393] asix 1-1.5:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [237630.002847] usb 1-1: USB disconnect, device number 32 [237630.002864] usb 1-1.1: USB disconnect, device number 33 [237630.003190] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet [237630.003299] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [237630.053722] usb 1-1.5: USB disconnect, device number 34 [237630.054023] asix 1-1.5:1.0 eth1: unregister 'asix' usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet [237635.852765] Indeed it is in host mode hprt0 = 00021501 [237636.062701] usb 1-1: new high-speed USB device number 35 using dwc_otg [237636.062838] Indeed it is in host mode hprt0 = 00001101 [237636.302817] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [237636.302826] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [237636.303218] hub 1-1:1.0: USB hub found [237636.303270] hub 1-1:1.0: 5 ports detected [237636.622670] usb 1-1.1: new high-speed USB device number 36 using dwc_otg [237636.752816] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [237636.752825] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [237636.755362] smsc95xx v1.0.6 [237636.844895] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:36:1e [237636.942784] usb 1-1.5: new high-speed USB device number 37 using dwc_otg [237637.054837] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [237637.055119] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [237637.095172] usb 1-1.5: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01 [237637.095189] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [237637.095199] usb 1-1.5: Product: AX88772B [237637.095209] usb 1-1.5: Manufacturer: ASIX Elec. Corp. [237637.095218] usb 1-1.5: SerialNumber: 0016FE [237637.557194] asix 1-1.5:1.0 eth1: register 'asix' at usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:8f:11:81 [237637.706119] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [237640.526279] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [237640.529855] asix 1-1.5:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [237701.886328] ERROR::dwc_otg_hcd_urb_enqueue:491: Not connected [237702.002852] usb 1-1: USB disconnect, device number 35 [237702.002869] usb 1-1.1: USB disconnect, device number 36 [237702.003194] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet [237702.003302] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [237702.063549] usb 1-1.5: USB disconnect, device number 37 [237702.063847] asix 1-1.5:1.0 eth1: unregister 'asix' usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet [237707.862741] Indeed it is in host mode hprt0 = 00021501 [237708.072701] usb 1-1: new high-speed USB device number 38 using dwc_otg [237708.072835] Indeed it is in host mode hprt0 = 00001101 [237708.312967] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [237708.312983] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [237708.313701] hub 1-1:1.0: USB hub found [237708.313795] hub 1-1:1.0: 5 ports detected [237708.632750] usb 1-1.1: new high-speed USB device number 39 using dwc_otg [237708.763010] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [237708.763026] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [237708.765910] smsc95xx v1.0.6 [237708.856512] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:36:1e [237708.952767] usb 1-1.5: new high-speed USB device number 40 using dwc_otg [237709.043899] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [237709.044310] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [237709.094857] usb 1-1.5: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01 [237709.094868] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [237709.094872] usb 1-1.5: Product: AX88772B [237709.094877] usb 1-1.5: Manufacturer: ASIX Elec. Corp. [237709.094882] usb 1-1.5: SerialNumber: 0016FE [237709.546209] asix 1-1.5:1.0 eth1: register 'asix' at usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:8f:11:81 [237709.627917] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [237712.448310] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [237712.451214] asix 1-1.5:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [237768.492317] ERROR::dwc_otg_hcd_urb_enqueue:491: Not connected [237768.502868] usb 1-1: USB disconnect, device number 38 [237768.502884] usb 1-1.1: USB disconnect, device number 39 [237768.503212] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet [237768.503318] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [237768.573611] usb 1-1.5: USB disconnect, device number 40 [237768.573915] asix 1-1.5:1.0 eth1: unregister 'asix' usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet [237770.852760] Indeed it is in host mode hprt0 = 00021501 [237771.062657] usb 1-1: new high-speed USB device number 41 using dwc_otg [237771.062740] Indeed it is in host mode hprt0 = 00001101 [237771.302812] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [237771.302821] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [237771.303216] hub 1-1:1.0: USB hub found [237771.303269] hub 1-1:1.0: 5 ports detected [237771.622656] usb 1-1.1: new high-speed USB device number 42 using dwc_otg [237771.753081] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [237771.753098] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [237771.758832] smsc95xx v1.0.6 [237771.847793] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:36:1e [237771.942811] usb 1-1.5: new high-speed USB device number 43 using dwc_otg [237772.043815] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [237772.044007] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [237772.094827] usb 1-1.5: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01 [237772.094837] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [237772.094842] usb 1-1.5: Product: AX88772B [237772.094847] usb 1-1.5: Manufacturer: ASIX Elec. Corp. [237772.094852] usb 1-1.5: SerialNumber: 0016FE [237772.546210] asix 1-1.5:1.0 eth1: register 'asix' at usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:8f:11:81 [237772.629192] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [237775.450300] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [237775.455784] asix 1-1.5:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [237806.752858] usb 1-1: USB disconnect, device number 41 [237806.752876] usb 1-1.1: USB disconnect, device number 42 [237806.753201] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet [237806.753308] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [237806.833613] usb 1-1.5: USB disconnect, device number 43 [237806.833913] asix 1-1.5:1.0 eth1: unregister 'asix' usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet [237811.202763] Indeed it is in host mode hprt0 = 00021501 [237811.412658] usb 1-1: new high-speed USB device number 44 using dwc_otg [237811.412738] Indeed it is in host mode hprt0 = 00001101 [237811.652808] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [237811.652817] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [237811.655115] hub 1-1:1.0: USB hub found [237811.655207] hub 1-1:1.0: 5 ports detected [237811.972730] usb 1-1.1: new high-speed USB device number 45 using dwc_otg [237812.102964] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [237812.102982] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [237812.105902] smsc95xx v1.0.6 [237812.196396] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:36:1e [237812.292758] usb 1-1.5: new high-speed USB device number 46 using dwc_otg [237812.393859] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [237812.394236] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [237812.434855] usb 1-1.5: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01 [237812.434865] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [237812.434870] usb 1-1.5: Product: AX88772B [237812.434875] usb 1-1.5: Manufacturer: ASIX Elec. Corp. [237812.434879] usb 1-1.5: SerialNumber: 0016FE [237812.886187] asix 1-1.5:1.0 eth1: register 'asix' at usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:8f:11:81 [237812.968336] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [237816.301100] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [237816.306444] asix 1-1.5:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [237869.002842] usb 1-1: USB disconnect, device number 44 [237869.002860] usb 1-1.1: USB disconnect, device number 45 [237869.003185] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet [237869.003292] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [237869.063682] usb 1-1.5: USB disconnect, device number 46 [237869.064003] asix 1-1.5:1.0 eth1: unregister 'asix' usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet [237873.752803] Indeed it is in host mode hprt0 = 00021501 [237873.962657] usb 1-1: new high-speed USB device number 47 using dwc_otg [237873.962737] Indeed it is in host mode hprt0 = 00001101 [237874.202829] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [237874.202839] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [237874.203236] hub 1-1:1.0: USB hub found [237874.203287] hub 1-1:1.0: 5 ports detected [237874.522691] usb 1-1.1: new high-speed USB device number 48 using dwc_otg [237874.652986] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [237874.653002] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [237874.655925] smsc95xx v1.0.6 [237874.746343] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:36:1e [237874.842742] usb 1-1.5: new high-speed USB device number 49 using dwc_otg [237874.933863] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [237874.934128] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [237874.984860] usb 1-1.5: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01 [237874.984870] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [237874.984874] usb 1-1.5: Product: AX88772B [237874.984879] usb 1-1.5: Manufacturer: ASIX Elec. Corp. [237874.984884] usb 1-1.5: SerialNumber: 0016FE [237875.436229] asix 1-1.5:1.0 eth1: register 'asix' at usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:8f:11:81 [237875.516907] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [237878.465118] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [237878.469654] asix 1-1.5:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [237927.785906] ERROR::dwc_otg_hcd_urb_enqueue:491: Not connected [237928.002844] usb 1-1: USB disconnect, device number 47 [237928.002861] usb 1-1.1: USB disconnect, device number 48 [237928.003186] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet [237928.003296] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [237928.065572] usb 1-1.5: USB disconnect, device number 49 [237928.065960] asix 1-1.5:1.0 eth1: unregister 'asix' usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet [237933.702755] Indeed it is in host mode hprt0 = 00021501 [237933.912660] usb 1-1: new high-speed USB device number 50 using dwc_otg [237933.912742] Indeed it is in host mode hprt0 = 00001101 [237934.152813] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [237934.152822] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [237934.153210] hub 1-1:1.0: USB hub found [237934.153261] hub 1-1:1.0: 5 ports detected [237934.482662] usb 1-1.1: new high-speed USB device number 51 using dwc_otg [237934.612976] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [237934.612992] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [237934.615892] smsc95xx v1.0.6 [237934.706654] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:36:1e [237934.802826] usb 1-1.5: new high-speed USB device number 52 using dwc_otg [237934.903865] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [237934.904137] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [237934.944844] usb 1-1.5: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01 [237934.944854] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [237934.944859] usb 1-1.5: Product: AX88772B [237934.944863] usb 1-1.5: Manufacturer: ASIX Elec. Corp. [237934.944868] usb 1-1.5: SerialNumber: 0016FE [237935.396262] asix 1-1.5:1.0 eth1: register 'asix' at usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:8f:11:81 [237935.479010] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [237938.299154] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [237938.302126] asix 1-1.5:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [237990.050641] ERROR::dwc_otg_hcd_urb_enqueue:491: Not connected [237990.252858] usb 1-1: USB disconnect, device number 50 [237990.252874] usb 1-1.1: USB disconnect, device number 51 [237990.253201] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet [237990.253310] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [237990.303974] usb 1-1.5: USB disconnect, device number 52 [237990.304269] asix 1-1.5:1.0 eth1: unregister 'asix' usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet [237995.552753] Indeed it is in host mode hprt0 = 00021501 [237995.762662] usb 1-1: new high-speed USB device number 53 using dwc_otg [237995.762754] Indeed it is in host mode hprt0 = 00001101 [237996.002826] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [237996.002834] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [237996.003226] hub 1-1:1.0: USB hub found [237996.003279] hub 1-1:1.0: 5 ports detected [237996.322658] usb 1-1.1: new high-speed USB device number 54 using dwc_otg [237996.452961] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [237996.452978] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [237996.455886] smsc95xx v1.0.6 [237996.546423] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:36:1e [237996.642855] usb 1-1.5: new high-speed USB device number 55 using dwc_otg [237996.754115] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [237996.754513] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [237996.784892] usb 1-1.5: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01 [237996.784902] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [237996.784906] usb 1-1.5: Product: AX88772B [237996.784911] usb 1-1.5: Manufacturer: ASIX Elec. Corp. [237996.784916] usb 1-1.5: SerialNumber: 0016FE [237997.236227] asix 1-1.5:1.0 eth1: register 'asix' at usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:8f:11:81 [237997.319638] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [238000.140138] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [238000.143135] asix 1-1.5:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [238048.002837] usb 1-1: USB disconnect, device number 53 [238048.002856] usb 1-1.1: USB disconnect, device number 54 [238048.003182] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet [238048.003295] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [238048.063658] usb 1-1.5: USB disconnect, device number 55 [238048.064004] asix 1-1.5:1.0 eth1: unregister 'asix' usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet [238050.702753] Indeed it is in host mode hprt0 = 00021501 [238050.912663] usb 1-1: new high-speed USB device number 56 using dwc_otg [238050.912748] Indeed it is in host mode hprt0 = 00001101 [238051.152813] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [238051.152823] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [238051.153217] hub 1-1:1.0: USB hub found [238051.153267] hub 1-1:1.0: 5 ports detected [238051.472660] usb 1-1.1: new high-speed USB device number 57 using dwc_otg [238051.603012] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [238051.603027] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [238051.605928] smsc95xx v1.0.6 [238051.726489] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:36:1e [238051.827537] usb 1-1.5: new high-speed USB device number 58 using dwc_otg [238051.935016] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [238051.935323] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [238051.965213] usb 1-1.5: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01 [238051.965230] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [238051.965240] usb 1-1.5: Product: AX88772B [238051.965250] usb 1-1.5: Manufacturer: ASIX Elec. Corp. [238051.965259] usb 1-1.5: SerialNumber: 0016FE [238052.437251] asix 1-1.5:1.0 eth1: register 'asix' at usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:8f:11:81 [238052.590768] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [238055.411130] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [238055.414350] asix 1-1.5:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [238093.212680] ERROR::dwc_otg_hcd_urb_enqueue:491: Not connected [238093.252830] usb 1-1: USB disconnect, device number 56 [238093.252846] usb 1-1.1: USB disconnect, device number 57 [238093.253173] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet [238093.253283] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [238093.272860] smsc95xx 1-1.1:1.0 eth0 (unregistering): Failed to read reg index 0x00000114: -19 [238093.272876] smsc95xx 1-1.1:1.0 eth0 (unregistering): Error reading MII_ACCESS [238093.272886] smsc95xx 1-1.1:1.0 eth0 (unregistering): MII is busy in smsc95xx_mdio_read [238093.272896] smsc95xx 1-1.1:1.0 eth0 (unregistering): Failed to read MII_BMSR [238093.303646] usb 1-1.5: USB disconnect, device number 58 [238093.303946] asix 1-1.5:1.0 eth1: unregister 'asix' usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet [238099.152779] Indeed it is in host mode hprt0 = 00021501 [238099.362658] usb 1-1: new high-speed USB device number 59 using dwc_otg [238099.362737] Indeed it is in host mode hprt0 = 00001101 [238099.602808] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [238099.602818] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [238099.605119] hub 1-1:1.0: USB hub found [238099.605211] hub 1-1:1.0: 5 ports detected [238099.922699] usb 1-1.1: new high-speed USB device number 60 using dwc_otg [238100.052968] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [238100.052985] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [238100.058497] smsc95xx v1.0.6 [238100.147890] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:36:1e [238100.242759] usb 1-1.5: new high-speed USB device number 61 using dwc_otg [238100.343807] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [238100.343980] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [238100.384850] usb 1-1.5: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01 [238100.384860] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [238100.384865] usb 1-1.5: Product: AX88772B [238100.384870] usb 1-1.5: Manufacturer: ASIX Elec. Corp. [238100.384874] usb 1-1.5: SerialNumber: 0016FE [238100.836226] asix 1-1.5:1.0 eth1: register 'asix' at usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:8f:11:81 [238100.918935] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [238103.739289] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [238103.742099] asix 1-1.5:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [238157.482670] ERROR::dwc_otg_hcd_urb_enqueue:491: Not connected [238157.502904] usb 1-1: USB disconnect, device number 59 [238157.502920] usb 1-1.1: USB disconnect, device number 60 [238157.503246] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet [238157.503374] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [238157.553622] usb 1-1.5: USB disconnect, device number 61 [238157.553918] asix 1-1.5:1.0 eth1: unregister 'asix' usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet [238164.402749] Indeed it is in host mode hprt0 = 00021501 [238164.612661] usb 1-1: new high-speed USB device number 62 using dwc_otg [238164.612742] Indeed it is in host mode hprt0 = 00001101 [238164.852807] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [238164.852816] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [238164.855069] hub 1-1:1.0: USB hub found [238164.855163] hub 1-1:1.0: 5 ports detected [238165.172661] usb 1-1.1: new high-speed USB device number 63 using dwc_otg [238165.302961] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [238165.302977] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [238165.307819] smsc95xx v1.0.6 [238165.397731] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:36:1e [238165.492769] usb 1-1.5: new high-speed USB device number 64 using dwc_otg [238165.593831] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [238165.594084] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [238165.634846] usb 1-1.5: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01 [238165.634856] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [238165.634861] usb 1-1.5: Product: AX88772B [238165.634866] usb 1-1.5: Manufacturer: ASIX Elec. Corp. [238165.634870] usb 1-1.5: SerialNumber: 0016FE [238166.086206] asix 1-1.5:1.0 eth1: register 'asix' at usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:8f:11:81 [238166.167739] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [238168.860134] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [238168.863351] asix 1-1.5:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [238222.719371] ERROR::dwc_otg_hcd_urb_enqueue:491: Not connected [238222.752827] usb 1-1: USB disconnect, device number 62 [238222.752843] usb 1-1.1: USB disconnect, device number 63 [238222.753170] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet [238222.753282] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [238222.823640] usb 1-1.5: USB disconnect, device number 64 [238222.823939] asix 1-1.5:1.0 eth1: unregister 'asix' usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet [238228.902752] Indeed it is in host mode hprt0 = 00021501 [238229.112703] usb 1-1: new high-speed USB device number 65 using dwc_otg [238229.112831] Indeed it is in host mode hprt0 = 00001101 [238229.352961] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [238229.352976] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [238229.353677] hub 1-1:1.0: USB hub found [238229.353769] hub 1-1:1.0: 5 ports detected [238229.672724] usb 1-1.1: new high-speed USB device number 66 using dwc_otg [238229.802966] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [238229.802983] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [238229.805901] smsc95xx v1.0.6 [238229.896584] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:36:1e [238229.992737] usb 1-1.5: new high-speed USB device number 67 using dwc_otg [238230.083838] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [238230.084105] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [238230.134870] usb 1-1.5: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01 [238230.134880] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [238230.134885] usb 1-1.5: Product: AX88772B [238230.134890] usb 1-1.5: Manufacturer: ASIX Elec. Corp. [238230.134894] usb 1-1.5: SerialNumber: 0016FE [238230.586207] asix 1-1.5:1.0 eth1: register 'asix' at usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:8f:11:81 [238230.668088] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [238233.488273] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [238233.493139] asix 1-1.5:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [238279.165061] ERROR::dwc_otg_hcd_urb_enqueue:491: Not connected [238279.252831] usb 1-1: USB disconnect, device number 65 [238279.252848] usb 1-1.1: USB disconnect, device number 66 [238279.253174] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet [238279.253282] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [238279.333574] usb 1-1.5: USB disconnect, device number 67 [238279.333877] asix 1-1.5:1.0 eth1: unregister 'asix' usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet --------------- END -------------------- -------------- START ------------------- 07 12 2020 15:30:01 : 63376 | eth 1 : Network connection lost ----------------------------------------- [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.66-v7+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1253 SMP Thu Aug 15 11:49:46 BST 2019 [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi Compute Module 3 Plus Rev 1.0 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 8 MiB at 0x3ac00000 [ 0.000000] On node 0 totalpages: 242688 [ 0.000000] Normal zone: 2133 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 242688 pages, LIFO batch:63 [ 0.000000] random: get_random_bytes called from start_kernel+0xac/0x4b4 with crng_init=0 [ 0.000000] percpu: Embedded 17 pages/cpu s39488 r8192 d21952 u69632 [ 0.000000] pcpu-alloc: s39488 r8192 d21952 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240555 [ 0.000000] Kernel command line: coherent_pool=1M bcm2708_fb.fbwidth=1600 bcm2708_fb.fbheight=1200 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:F5:36:1E vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=PARTUUID=6c998fe8-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 939088K/970752K available (8192K kernel code, 629K rwdata, 2176K rodata, 1024K init, 821K bss, 23472K reserved, 8192K cma-reserved) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xbb800000 - 0xff800000 (1088 MB) lowmem : 0x80000000 - 0xbb400000 ( 948 MB) modules : 0x7f000000 - 0x80000000 ( 16 MB) .text : 0x(ptrval) - 0x(ptrval) (9184 kB) .init : 0x(ptrval) - 0x(ptrval) (1024 kB) .data : 0x(ptrval) - 0x(ptrval) ( 630 kB) .bss : 0x(ptrval) - 0x(ptrval) ( 822 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 26394 entries in 78 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000019] Switching to timer-based delay loop, resolution 52ns [ 0.000278] Console: colour dummy device 80x30 [ 0.000297] console [tty1] enabled [ 0.000340] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.000356] pid_max: default: 32768 minimum: 301 [ 0.000697] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000713] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001625] CPU: Testing write buffer coherency: ok [ 0.002095] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002743] Setting up static identity map for 0x100000 - 0x10003c [ 0.002891] rcu: Hierarchical SRCU implementation. [ 0.003680] smp: Bringing up secondary CPUs ... [ 0.004524] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.005459] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.006327] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.006451] smp: Brought up 1 node, 4 CPUs [ 0.006463] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ 0.006468] CPU: All CPU(s) started in HYP mode. [ 0.006473] CPU: Virtualization extensions available. [ 0.007447] devtmpfs: initialized [ 0.020754] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 [ 0.020987] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.021006] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.021594] pinctrl core: initialized pinctrl subsystem [ 0.022457] NET: Registered protocol family 16 [ 0.025516] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.031304] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.031313] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.031528] Serial: AMBA PL011 UART driver [ 0.034061] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.069593] bcm2835-dma 3f007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1 [ 0.071298] SCSI subsystem initialized [ 0.071522] usbcore: registered new interface driver usbfs [ 0.071577] usbcore: registered new interface driver hub [ 0.071670] usbcore: registered new device driver usb [ 0.090128] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-08-15 12:06, variant start [ 0.100408] raspberrypi-firmware soc:firmware: Firmware hash is 0e6daa5106dd4164474616408e0dc24f997ffcf3 [ 0.111847] clocksource: Switched to clocksource arch_sys_counter [ 0.201151] VFS: Disk quotas dquot_6.6.0 [ 0.201234] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.201431] FS-Cache: Loaded [ 0.201642] CacheFiles: Loaded [ 0.211651] NET: Registered protocol family 2 [ 0.212446] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.212483] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.212593] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.212779] TCP: Hash tables configured (established 8192 bind 8192) [ 0.212912] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.212959] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.213267] NET: Registered protocol family 1 [ 0.213843] RPC: Registered named UNIX socket transport module. [ 0.213849] RPC: Registered udp transport module. [ 0.213855] RPC: Registered tcp transport module. [ 0.213861] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.215643] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available [ 0.218648] Initialise system trusted keyrings [ 0.218840] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.228821] FS-Cache: Netfs 'nfs' registered for caching [ 0.229387] NFS: Registering the id_resolver key type [ 0.229417] Key type id_resolver registered [ 0.229423] Key type id_legacy registered [ 0.229439] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.231708] Key type asymmetric registered [ 0.231717] Asymmetric key parser 'x509' registered [ 0.231774] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.231982] io scheduler noop registered [ 0.231990] io scheduler deadline registered (default) [ 0.232170] io scheduler cfq registered [ 0.232178] io scheduler mq-deadline registered (default) [ 0.232185] io scheduler kyber registered [ 0.235378] bcm2708_fb soc:fb: FB found 1 display(s) [ 0.289451] Console: switching to colour frame buffer device 200x75 [ 0.320604] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1600x1200 [ 0.322959] bcm2835-rng 3f104000.rng: hwrng registered [ 0.323285] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 0.323821] vc-sm: Videocore shared memory driver [ 0.324146] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [ 0.335119] brd: module loaded [ 0.345640] loop: module loaded [ 0.346295] Loading iSCSI transport class v2.0-870. [ 0.347031] libphy: Fixed MDIO Bus: probed [ 0.347148] usbcore: registered new interface driver lan78xx [ 0.347206] usbcore: registered new interface driver smsc95xx [ 0.347224] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 0.375119] dwc_otg 3f980000.usb: base=(ptrval) [ 0.575357] Core Release: 2.80a [ 0.575367] Setting default values for core params [ 0.575401] Finished setting default values for core params [ 0.775713] Using Buffer DMA mode [ 0.775721] Periodic Transfer Interrupt Enhancement - disabled [ 0.775726] Multiprocessor Interrupt Enhancement - disabled [ 0.775734] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 0.775751] Dedicated Tx FIFOs mode [ 0.776231] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = bad04000 dma = 0xfad04000 len=9024 [ 0.776260] FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints Interrupt/Control Split Transaction hack enabled [ 0.776268] dwc_otg: Microframe scheduler enabled [ 0.776325] WARN::hcd_init_fiq:457: FIQ on core 1 [ 0.776336] WARN::hcd_init_fiq:458: FIQ ASM at 80654f4c length 36 [ 0.776348] WARN::hcd_init_fiq:497: MPHI regs_base at bb810000 [ 0.776367] dwc_otg 3f980000.usb: DWC OTG Controller [ 0.776401] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 0.776438] dwc_otg 3f980000.usb: irq 56, io mem 0x00000000 [ 0.776486] Init: Port Power? op_state=1 [ 0.776493] Init: Power Port (0) [ 0.776755] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 0.776766] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.776776] usb usb1: Product: DWC OTG Controller [ 0.776786] usb usb1: Manufacturer: Linux 4.19.66-v7+ dwc_otg_hcd [ 0.776795] usb usb1: SerialNumber: 3f980000.usb [ 0.777428] hub 1-0:1.0: USB hub found [ 0.777482] hub 1-0:1.0: 1 port detected [ 0.778081] dwc_otg: FIQ enabled [ 0.778087] dwc_otg: NAK holdoff enabled [ 0.778092] dwc_otg: FIQ split-transaction FSM enabled [ 0.778103] Module dwc_common_port init [ 0.778356] usbcore: registered new interface driver usb-storage [ 0.778529] mousedev: PS/2 mouse device common for all mice [ 0.779539] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 0.779780] bcm2835-cpufreq: min=600000 max=1200000 [ 0.780259] sdhci: Secure Digital Host Controller Interface driver [ 0.780264] sdhci: Copyright(c) Pierre Ossman [ 0.780661] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe [ 0.781063] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe [ 0.781190] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.781679] ledtrig-cpu: registered to indicate activity on CPUs [ 0.781758] hidraw: raw HID events driver (C) Jiri Kosina [ 0.781978] usbcore: registered new interface driver usbhid [ 0.781984] usbhid: USB HID core driver [ 0.782845] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0 [ 0.784483] [vc_sm_connected_init]: start [ 0.794231] [vc_sm_connected_init]: end - returning 0 [ 0.795349] Initializing XFRM netlink socket [ 0.795373] NET: Registered protocol family 17 [ 0.795481] Key type dns_resolver registered [ 0.796068] Registering SWP/SWPB emulation handler [ 0.796736] registered taskstats version 1 [ 0.796754] Loading compiled-in X.509 certificates [ 0.804065] uart-pl011 3f201000.serial: cts_event_workaround enabled [ 0.804152] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2 [ 0.804217] console [ttyAMA0] enabled [ 0.806227] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0 [ 0.806238] mmc-bcm2835 3f300000.mmc: DMA channel allocated [ 0.832488] sdhost: log_buf @ (ptrval) (fad07000) [ 0.879685] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 0.881041] of_cfs_init [ 0.881155] of_cfs_init: OK [ 0.881802] Waiting for root device PARTUUID=6c998fe8-02... [ 0.907898] random: fast init done [ 0.911413] mmc1: new high speed SDIO card at address 0001 [ 0.976465] mmc0: new high speed MMC card at address 0001 [ 0.977675] mmcblk0: mmc0:0001 DG4064 59.2 GiB [ 0.978496] mmcblk0boot0: mmc0:0001 DG4064 partition 1 4.00 MiB [ 0.979322] mmcblk0boot1: mmc0:0001 DG4064 partition 2 4.00 MiB [ 0.979680] mmcblk0rpmb: mmc0:0001 DG4064 partition 3 4.00 MiB, chardev (246:0) [ 0.981585] mmcblk0: p1 p2 [ 1.011976] Indeed it is in host mode hprt0 = 00021501 [ 1.023511] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.023571] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.025237] devtmpfs: mounted [ 1.073867] Freeing unused kernel memory: 1024K [ 1.102285] Run /sbin/init as init process [ 1.221920] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 1.222075] Indeed it is in host mode hprt0 = 00001101 [ 1.462191] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [ 1.462206] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.462885] hub 1-1:1.0: USB hub found [ 1.462987] hub 1-1:1.0: 5 ports detected [ 1.579406] systemd[1]: System time before build time, advancing clock. [ 1.724638] NET: Registered protocol family 10 [ 1.725968] Segment Routing with IPv6 [ 1.766867] random: systemd: uninitialized urandom read (16 bytes read) [ 1.769419] random: systemd: uninitialized urandom read (16 bytes read) [ 1.775493] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 1.776120] systemd[1]: Detected architecture arm. [ 1.777172] systemd[1]: Set hostname to . [ 1.781919] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 1.853632] random: systemd-cryptse: uninitialized urandom read (16 bytes read) [ 1.857609] uart-pl011 3f201000.serial: no DMA platform data [ 1.912467] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [ 1.912486] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.915334] smsc95xx v1.0.6 [ 2.005739] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:36:1e [ 2.101921] usb 1-1.5: new high-speed USB device number 4 using dwc_otg [ 2.244467] usb 1-1.5: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01 [ 2.244483] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.244493] usb 1-1.5: Product: AX88772B [ 2.244504] usb 1-1.5: Manufacturer: ASIX Elec. Corp. [ 2.244512] usb 1-1.5: SerialNumber: 0016FE [ 2.251805] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 2.252283] systemd[1]: Listening on fsck to fsckd communication Socket. [ 2.252531] systemd[1]: Listening on udev Kernel Socket. [ 2.253471] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 2.253785] systemd[1]: Listening on Syslog Socket. [ 2.253924] systemd[1]: Reached target Swap. [ 2.254266] systemd[1]: Listening on Journal Socket. [ 2.413632] i2c /dev entries driver [ 2.939484] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 3.032088] systemd-journald[113]: Received request to flush runtime journal from PID 1 [ 3.345814] i2c-gpio i2c@0: using lines 43 (SDA) and 42 (SCL) [ 3.385377] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 3.390212] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 3.390230] [vc_sm_connected_init]: start [ 3.393857] media: Linux media interface: v0.10 [ 3.396831] [vc_sm_connected_init]: installed successfully [ 3.432853] videodev: Linux video capture interface: v2.00 [ 3.465134] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 3.479859] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 3.494355] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 3.532818] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 3.532834] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 3.545515] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 3.545537] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 3.550318] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 3.550332] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 3.651326] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 3.713097] bcm2835_audio soc:audio: card created with 8 channels [ 3.786478] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.859426] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.860892] Bluetooth: Core ver 2.22 [ 3.861051] NET: Registered protocol family 31 [ 3.861058] Bluetooth: HCI device and connection manager initialized [ 3.861106] Bluetooth: HCI socket layer initialized [ 3.861163] Bluetooth: L2CAP socket layer initialized [ 3.861206] Bluetooth: SCO socket layer initialized [ 3.906588] bt8xxx: loading out-of-tree module taints kernel. [ 3.907326] mlan: module license 'Marvell Proprietary' taints kernel. [ 3.907336] Disabling lock debugging due to kernel taint [ 3.919003] BT: Loading driver [ 4.043668] BT Request firmware: mrvl/sd8887_uapsta_a2.bin [ 4.103030] wlan: Loading MWLAN driver [ 4.309284] asix 1-1.5:1.0 eth1: register 'asix' at usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:8f:11:81 [ 4.311234] usbcore: registered new interface driver asix [ 4.574965] random: crng init done [ 4.574984] random: 7 urandom warning(s) missed due to ratelimiting [ 5.043030] BT: FW download over, size 616840 bytes [ 5.274515] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 5.274786] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.275681] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 5.653773] BT FW is active(6) [ 5.688293] BT: Driver loaded successfully [ 5.722885] CMD_RESP: cmd 0x23a error, result=0x2 [ 5.723773] creating custom regulatory domain failed [ 5.738807] get_channel when STA is not connected [ 5.869618] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS [ 6.266781] get_channel when STA is not connected [ 6.267903] get_channel when STA is not connected [ 6.269035] get_channel when STA is not connected [ 6.269442] get_channel when STA is not connected [ 6.270971] get_channel when STA is not connected [ 6.272519] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 6.359533] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 6.359541] Bluetooth: BNEP filters: protocol multicast [ 6.359557] Bluetooth: BNEP socket layer initialized [ 6.583115] Bluetooth: RFCOMM TTY layer initialized [ 6.583159] Bluetooth: RFCOMM socket layer initialized [ 6.583195] Bluetooth: RFCOMM ver 1.11 [ 7.200268] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 7.203167] asix 1-1.5:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 12.996610] fuse init (API version 7.27) [ 48.362705] ERROR::dwc_otg_hcd_urb_enqueue:491: Not connected [ 48.542081] usb 1-1: USB disconnect, device number 2 [ 48.542099] usb 1-1.1: USB disconnect, device number 3 [ 48.542442] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet [ 48.542553] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 48.592856] usb 1-1.5: USB disconnect, device number 4 [ 48.593168] asix 1-1.5:1.0 eth1: unregister 'asix' usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet [ 57.641968] Indeed it is in host mode hprt0 = 00021501 [ 57.851880] usb 1-1: new high-speed USB device number 5 using dwc_otg [ 57.851979] Indeed it is in host mode hprt0 = 00001101 [ 58.092020] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [ 58.092030] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 58.092464] hub 1-1:1.0: USB hub found [ 58.092515] hub 1-1:1.0: 5 ports detected [ 58.411873] usb 1-1.1: new high-speed USB device number 6 using dwc_otg [ 58.542179] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [ 58.542197] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 58.545155] smsc95xx v1.0.6 [ 58.635755] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:36:1e [ 58.731987] usb 1-1.5: new high-speed USB device number 7 using dwc_otg [ 58.823079] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 58.823353] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 58.874058] usb 1-1.5: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01 [ 58.874069] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 58.874074] usb 1-1.5: Product: AX88772B [ 58.874080] usb 1-1.5: Manufacturer: ASIX Elec. Corp. [ 58.874084] usb 1-1.5: SerialNumber: 0016FE [ 59.325458] asix 1-1.5:1.0 eth1: register 'asix' at usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:8f:11:81 [ 59.409634] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 62.230456] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 62.235420] asix 1-1.5:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 98.545331] ERROR::dwc_otg_hcd_urb_enqueue:491: Not connected [ 98.792107] usb 1-1: USB disconnect, device number 5 [ 98.792125] usb 1-1.1: USB disconnect, device number 6 [ 98.792469] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet [ 98.792586] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 98.862994] usb 1-1.5: USB disconnect, device number 7 [ 98.863391] asix 1-1.5:1.0 eth1: unregister 'asix' usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet [ 105.841976] Indeed it is in host mode hprt0 = 00021501 [ 106.051867] usb 1-1: new high-speed USB device number 8 using dwc_otg [ 106.051953] Indeed it is in host mode hprt0 = 00001101 [ 106.292055] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [ 106.292064] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 106.294440] hub 1-1:1.0: USB hub found [ 106.294532] hub 1-1:1.0: 5 ports detected [ 106.611872] usb 1-1.1: new high-speed USB device number 9 using dwc_otg [ 106.742207] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [ 106.742226] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 106.747351] smsc95xx v1.0.6 [ 106.837232] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:36:1e [ 106.932016] usb 1-1.5: new high-speed USB device number 10 using dwc_otg [ 107.053102] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 107.053294] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 107.074786] usb 1-1.5: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01 [ 107.074797] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 107.074802] usb 1-1.5: Product: AX88772B [ 107.074807] usb 1-1.5: Manufacturer: ASIX Elec. Corp. [ 107.074812] usb 1-1.5: SerialNumber: 0016FE [ 107.525464] asix 1-1.5:1.0 eth1: register 'asix' at usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:8f:11:81 [ 107.608813] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 110.557328] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 110.560298] asix 1-1.5:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 140.481882] ERROR::dwc_otg_hcd_urb_enqueue:491: Not connected [ 140.542080] usb 1-1: USB disconnect, device number 8 [ 140.542098] usb 1-1.1: USB disconnect, device number 9 [ 140.542444] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet [ 140.542562] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 140.592868] usb 1-1.5: USB disconnect, device number 10 [ 140.593177] asix 1-1.5:1.0 eth1: unregister 'asix' usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet [ 147.541972] usb usb1-port1: connect-debounce failed [ 148.641971] Indeed it is in host mode hprt0 = 00021501 [ 148.851877] usb 1-1: new high-speed USB device number 11 using dwc_otg [ 148.851967] Indeed it is in host mode hprt0 = 00001101 [ 149.092030] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [ 149.092039] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 149.092478] hub 1-1:1.0: USB hub found [ 149.092557] hub 1-1:1.0: 5 ports detected [ 149.411869] usb 1-1.1: new high-speed USB device number 12 using dwc_otg [ 149.542179] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [ 149.542198] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 149.545153] smsc95xx v1.0.6 [ 149.635929] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:36:1e [ 149.732018] usb 1-1.5: new high-speed USB device number 13 using dwc_otg [ 149.853087] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 149.853375] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 149.874218] usb 1-1.5: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01 [ 149.874228] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 149.874232] usb 1-1.5: Product: AX88772B [ 149.874238] usb 1-1.5: Manufacturer: ASIX Elec. Corp. [ 149.874243] usb 1-1.5: SerialNumber: 0016FE [ 150.325507] asix 1-1.5:1.0 eth1: register 'asix' at usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:8f:11:81 [ 150.410208] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 153.102394] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 153.105352] asix 1-1.5:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 188.031883] ERROR::dwc_otg_hcd_urb_enqueue:491: Not connected [ 188.042115] usb 1-1: USB disconnect, device number 11 [ 188.042134] usb 1-1.1: USB disconnect, device number 12 [ 188.042482] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet [ 188.042600] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 188.092874] usb 1-1.5: USB disconnect, device number 13 [ 188.093186] asix 1-1.5:1.0 eth1: unregister 'asix' usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet [ 195.541978] Indeed it is in host mode hprt0 = 00021501 [ 195.751873] usb 1-1: new high-speed USB device number 14 using dwc_otg [ 195.751957] Indeed it is in host mode hprt0 = 00001101 [ 195.992019] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [ 195.992028] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 195.992791] hub 1-1:1.0: USB hub found [ 195.992864] hub 1-1:1.0: 5 ports detected [ 196.311873] usb 1-1.1: new high-speed USB device number 15 using dwc_otg [ 196.442175] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [ 196.442191] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 196.445174] smsc95xx v1.0.6 [ 196.535592] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:36:1e [ 196.631954] usb 1-1.5: new high-speed USB device number 16 using dwc_otg [ 196.733241] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 196.733443] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 196.774087] usb 1-1.5: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01 [ 196.774098] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 196.774104] usb 1-1.5: Product: AX88772B [ 196.774109] usb 1-1.5: Manufacturer: ASIX Elec. Corp. [ 196.774113] usb 1-1.5: SerialNumber: 0016FE [ 197.225456] asix 1-1.5:1.0 eth1: register 'asix' at usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:8f:11:81 [ 197.308976] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 200.129342] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 200.134397] asix 1-1.5:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 229.521880] ERROR::dwc_otg_hcd_urb_enqueue:491: Not connected [ 229.542136] usb 1-1: USB disconnect, device number 14 [ 229.542155] usb 1-1.1: USB disconnect, device number 15 [ 229.542501] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet [ 229.542622] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 229.612974] usb 1-1.5: USB disconnect, device number 16 [ 229.613327] asix 1-1.5:1.0 eth1: unregister 'asix' usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet [ 234.441994] Indeed it is in host mode hprt0 = 00021501 [ 234.651873] usb 1-1: new high-speed USB device number 17 using dwc_otg [ 234.651955] Indeed it is in host mode hprt0 = 00001101 [ 234.892093] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [ 234.892104] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 234.894532] hub 1-1:1.0: USB hub found [ 234.894637] hub 1-1:1.0: 5 ports detected [ 235.211871] usb 1-1.1: new high-speed USB device number 18 using dwc_otg [ 235.342175] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [ 235.342191] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 235.345144] smsc95xx v1.0.6 [ 235.435807] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:36:1e [ 235.532025] usb 1-1.5: new high-speed USB device number 19 using dwc_otg [ 235.653141] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 235.653519] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 235.674206] usb 1-1.5: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01 [ 235.674217] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 235.674222] usb 1-1.5: Product: AX88772B [ 235.674227] usb 1-1.5: Manufacturer: ASIX Elec. Corp. [ 235.674231] usb 1-1.5: SerialNumber: 0016FE [ 236.125454] asix 1-1.5:1.0 eth1: register 'asix' at usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:8f:11:81 [ 236.210640] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 239.031395] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 239.036435] asix 1-1.5:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 260.542043] usb 1-1: USB disconnect, device number 17 [ 260.542063] usb 1-1.1: USB disconnect, device number 18 [ 260.542406] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet [ 260.542523] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 260.652755] usb 1-1.5: USB disconnect, device number 19 [ 260.653065] asix 1-1.5:1.0 eth1: unregister 'asix' usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet [ 268.141969] Indeed it is in host mode hprt0 = 00021501 [ 268.351922] usb 1-1: new high-speed USB device number 20 using dwc_otg [ 268.352074] Indeed it is in host mode hprt0 = 00001101 [ 268.592215] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [ 268.592231] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 268.596350] hub 1-1:1.0: USB hub found [ 268.596501] hub 1-1:1.0: 5 ports detected [ 268.911921] usb 1-1.1: new high-speed USB device number 21 using dwc_otg [ 269.042188] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [ 269.042204] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 269.047279] smsc95xx v1.0.6 [ 269.137036] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:36:1e [ 269.231960] usb 1-1.5: new high-speed USB device number 22 using dwc_otg [ 269.323039] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 269.323337] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 269.374061] usb 1-1.5: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01 [ 269.374073] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 269.374078] usb 1-1.5: Product: AX88772B [ 269.374083] usb 1-1.5: Manufacturer: ASIX Elec. Corp. [ 269.374087] usb 1-1.5: SerialNumber: 0016FE [ 269.825452] asix 1-1.5:1.0 eth1: register 'asix' at usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:8f:11:81 [ 269.912386] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 272.604551] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 272.607728] asix 1-1.5:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 304.171879] ERROR::dwc_otg_hcd_urb_enqueue:491: Not connected [ 304.252055] usb 1-1: USB disconnect, device number 20 [ 304.252073] usb 1-1.1: USB disconnect, device number 21 [ 304.252418] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet [ 304.252533] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 304.303046] usb 1-1.5: USB disconnect, device number 22 [ 304.303363] asix 1-1.5:1.0 eth1: unregister 'asix' usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet [ 310.802026] Indeed it is in host mode hprt0 = 00021501 [ 311.011905] usb 1-1: new high-speed USB device number 23 using dwc_otg [ 311.012044] Indeed it is in host mode hprt0 = 00001101 [ 311.252222] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [ 311.252240] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 311.252981] hub 1-1:1.0: USB hub found [ 311.253094] hub 1-1:1.0: 5 ports detected [ 311.571913] usb 1-1.1: new high-speed USB device number 24 using dwc_otg [ 311.702171] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [ 311.702188] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 311.705205] smsc95xx v1.0.6 [ 311.795726] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:36:1e [ 311.891964] usb 1-1.5: new high-speed USB device number 25 using dwc_otg [ 312.013306] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 312.013734] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 312.044120] usb 1-1.5: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01 [ 312.044131] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 312.044135] usb 1-1.5: Product: AX88772B [ 312.044140] usb 1-1.5: Manufacturer: ASIX Elec. Corp. [ 312.044145] usb 1-1.5: SerialNumber: 0016FE [ 312.495440] asix 1-1.5:1.0 eth1: register 'asix' at usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:8f:11:81 [ 312.580137] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 315.528762] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 315.533267] asix 1-1.5:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 338.829382] ERROR::dwc_otg_hcd_urb_enqueue:491: Not connected [ 339.002089] usb 1-1: USB disconnect, device number 23 [ 339.002108] usb 1-1.1: USB disconnect, device number 24 [ 339.002455] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet [ 339.002575] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 339.058495] usb 1-1.5: USB disconnect, device number 25 [ 339.058875] asix 1-1.5:1.0 eth1: unregister 'asix' usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet [ 347.201966] Indeed it is in host mode hprt0 = 00021501 [ 347.411917] usb 1-1: new high-speed USB device number 26 using dwc_otg [ 347.412046] Indeed it is in host mode hprt0 = 00001101 [ 347.652154] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [ 347.652171] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 347.652891] hub 1-1:1.0: USB hub found [ 347.652983] hub 1-1:1.0: 5 ports detected [ 347.971922] usb 1-1.1: new high-speed USB device number 27 using dwc_otg [ 348.102148] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [ 348.102163] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 348.105113] smsc95xx v1.0.6 [ 348.195871] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:36:1e [ 348.291973] usb 1-1.5: new high-speed USB device number 28 using dwc_otg [ 348.393132] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 348.393407] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 348.434085] usb 1-1.5: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01 [ 348.434096] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 348.434102] usb 1-1.5: Product: AX88772B [ 348.434106] usb 1-1.5: Manufacturer: ASIX Elec. Corp. [ 348.434111] usb 1-1.5: SerialNumber: 0016FE [ 348.885455] asix 1-1.5:1.0 eth1: register 'asix' at usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:8f:11:81 [ 348.972326] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 351.920534] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 351.923962] asix 1-1.5:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 383.002293] ERROR::dwc_otg_hcd_urb_enqueue:491: Not connected [ 383.252084] usb 1-1: USB disconnect, device number 26 [ 383.252103] usb 1-1.1: USB disconnect, device number 27 [ 383.252449] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet [ 383.252562] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 383.314566] usb 1-1.5: USB disconnect, device number 28 [ 383.314960] asix 1-1.5:1.0 eth1: unregister 'asix' usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet [ 390.651963] Indeed it is in host mode hprt0 = 00021501 [ 390.861874] usb 1-1: new high-speed USB device number 29 using dwc_otg [ 390.861954] Indeed it is in host mode hprt0 = 00001101 [ 391.102030] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [ 391.102040] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 391.102473] hub 1-1:1.0: USB hub found [ 391.102531] hub 1-1:1.0: 5 ports detected [ 391.421878] usb 1-1.1: new high-speed USB device number 30 using dwc_otg [ 391.552179] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [ 391.552197] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 391.555168] smsc95xx v1.0.6 [ 391.645938] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:36:1e [ 391.741990] usb 1-1.5: new high-speed USB device number 31 using dwc_otg [ 391.843218] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 391.843648] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 391.884112] usb 1-1.5: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01 [ 391.884124] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 391.884129] usb 1-1.5: Product: AX88772B [ 391.884135] usb 1-1.5: Manufacturer: ASIX Elec. Corp. [ 391.884139] usb 1-1.5: SerialNumber: 0016FE [ 392.335469] asix 1-1.5:1.0 eth1: register 'asix' at usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:8f:11:81 [ 392.419426] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 395.239325] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 395.244008] asix 1-1.5:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 427.179364] ERROR::dwc_otg_hcd_urb_enqueue:491: Not connected [ 427.252063] usb 1-1: USB disconnect, device number 29 [ 427.252081] usb 1-1.1: USB disconnect, device number 30 [ 427.252429] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet [ 427.252547] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 427.312789] usb 1-1.5: USB disconnect, device number 31 [ 427.313093] asix 1-1.5:1.0 eth1: unregister 'asix' usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet [ 436.451964] Indeed it is in host mode hprt0 = 00021501 [ 436.661917] usb 1-1: new high-speed USB device number 32 using dwc_otg [ 436.662047] Indeed it is in host mode hprt0 = 00001101 [ 436.902034] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [ 436.902045] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 436.902485] hub 1-1:1.0: USB hub found [ 436.902553] hub 1-1:1.0: 5 ports detected [ 437.221871] usb 1-1.1: new high-speed USB device number 33 using dwc_otg [ 437.352078] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [ 437.352087] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 437.360095] smsc95xx v1.0.6 [ 437.444089] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:36:1e [ 437.542048] usb 1-1.5: new high-speed USB device number 34 using dwc_otg [ 437.623999] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 437.624287] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 437.684321] usb 1-1.5: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01 [ 437.684338] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 437.684348] usb 1-1.5: Product: AX88772B [ 437.684358] usb 1-1.5: Manufacturer: ASIX Elec. Corp. [ 437.684367] usb 1-1.5: SerialNumber: 0016FE [ 438.136499] asix 1-1.5:1.0 eth1: register 'asix' at usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:8f:11:81 [ 438.264762] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 441.085519] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 441.088472] asix 1-1.5:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 473.752135] usb 1-1: USB disconnect, device number 32 [ 473.752154] usb 1-1.1: USB disconnect, device number 33 [ 473.752498] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet [ 473.752620] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 473.825147] usb 1-1.5: USB disconnect, device number 34 [ 473.825543] asix 1-1.5:1.0 eth1: unregister 'asix' usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet [ 481.251996] Indeed it is in host mode hprt0 = 00021501 [ 481.461913] usb 1-1: new high-speed USB device number 35 using dwc_otg [ 481.462042] Indeed it is in host mode hprt0 = 00001101 [ 481.702173] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [ 481.702188] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 481.703033] hub 1-1:1.0: USB hub found [ 481.703135] hub 1-1:1.0: 5 ports detected [ 482.021918] usb 1-1.1: new high-speed USB device number 36 using dwc_otg [ 482.152179] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [ 482.152196] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 482.155226] smsc95xx v1.0.6 [ 482.245695] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:36:1e [ 482.341990] usb 1-1.5: new high-speed USB device number 37 using dwc_otg [ 482.443043] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 482.443328] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 482.494061] usb 1-1.5: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01 [ 482.494072] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 482.494078] usb 1-1.5: Product: AX88772B [ 482.494083] usb 1-1.5: Manufacturer: ASIX Elec. Corp. [ 482.494087] usb 1-1.5: SerialNumber: 0016FE [ 482.945398] asix 1-1.5:1.0 eth1: register 'asix' at usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:8f:11:81 [ 483.029320] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 485.849436] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 485.852743] asix 1-1.5:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 511.621881] ERROR::dwc_otg_hcd_urb_enqueue:491: Not connected [ 511.752097] usb 1-1: USB disconnect, device number 35 [ 511.752115] usb 1-1.1: USB disconnect, device number 36 [ 511.752460] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet [ 511.752579] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 511.802902] usb 1-1.5: USB disconnect, device number 37 [ 511.803212] asix 1-1.5:1.0 eth1: unregister 'asix' usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet [ 520.801970] Indeed it is in host mode hprt0 = 00021501 [ 521.011918] usb 1-1: new high-speed USB device number 38 using dwc_otg [ 521.013066] Indeed it is in host mode hprt0 = 00001101 [ 521.252207] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [ 521.252226] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 521.252958] hub 1-1:1.0: USB hub found [ 521.253052] hub 1-1:1.0: 5 ports detected [ 521.571913] usb 1-1.1: new high-speed USB device number 39 using dwc_otg [ 521.702179] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [ 521.702196] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 521.705173] smsc95xx v1.0.6 [ 521.795716] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:36:1e [ 521.892018] usb 1-1.5: new high-speed USB device number 40 using dwc_otg [ 521.993120] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 521.993307] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 522.034087] usb 1-1.5: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01 [ 522.034099] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 522.034105] usb 1-1.5: Product: AX88772B [ 522.034109] usb 1-1.5: Manufacturer: ASIX Elec. Corp. [ 522.034114] usb 1-1.5: SerialNumber: 0016FE [ 522.495428] asix 1-1.5:1.0 eth1: register 'asix' at usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:8f:11:81 [ 522.578170] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 525.526542] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 525.529825] asix 1-1.5:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 557.401682] ERROR::dwc_otg_hcd_urb_enqueue:491: Not connected [ 557.502107] usb 1-1: USB disconnect, device number 38 [ 557.502125] usb 1-1.1: USB disconnect, device number 39 [ 557.502474] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet [ 557.502595] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 557.542888] usb 1-1.5: USB disconnect, device number 40 [ 557.543228] asix 1-1.5:1.0 eth1: unregister 'asix' usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet [ 565.651975] Indeed it is in host mode hprt0 = 00021501 [ 565.861873] usb 1-1: new high-speed USB device number 41 using dwc_otg [ 565.861953] Indeed it is in host mode hprt0 = 00001101 [ 566.102030] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [ 566.102040] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 566.102482] hub 1-1:1.0: USB hub found [ 566.102539] hub 1-1:1.0: 5 ports detected [ 566.421877] usb 1-1.1: new high-speed USB device number 42 using dwc_otg [ 566.552181] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [ 566.552199] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 566.555188] smsc95xx v1.0.6 [ 566.645921] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:36:1e [ 566.742000] usb 1-1.5: new high-speed USB device number 43 using dwc_otg [ 566.843115] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 566.843398] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 566.894059] usb 1-1.5: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01 [ 566.894070] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 566.894075] usb 1-1.5: Product: AX88772B [ 566.894080] usb 1-1.5: Manufacturer: ASIX Elec. Corp. [ 566.894084] usb 1-1.5: SerialNumber: 0016FE [ 567.345362] asix 1-1.5:1.0 eth1: register 'asix' at usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:8f:11:81 [ 567.435847] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 570.128324] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 570.131316] asix 1-1.5:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 603.671881] ERROR::dwc_otg_hcd_urb_enqueue:491: Not connected [ 603.752187] usb 1-1: USB disconnect, device number 41 [ 603.752204] usb 1-1.1: USB disconnect, device number 42 [ 603.752552] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet [ 603.752681] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 603.803015] usb 1-1.5: USB disconnect, device number 43 [ 603.803325] asix 1-1.5:1.0 eth1: unregister 'asix' usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet [ 613.001970] Indeed it is in host mode hprt0 = 00021501 [ 613.211875] usb 1-1: new high-speed USB device number 44 using dwc_otg [ 613.211957] Indeed it is in host mode hprt0 = 00001101 [ 613.452021] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [ 613.452029] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 613.454287] hub 1-1:1.0: USB hub found [ 613.454370] hub 1-1:1.0: 5 ports detected [ 613.771873] usb 1-1.1: new high-speed USB device number 45 using dwc_otg [ 613.902173] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [ 613.902188] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 613.905054] smsc95xx v1.0.6 [ 613.995535] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:36:1e [ 614.092016] usb 1-1.5: new high-speed USB device number 46 using dwc_otg [ 614.193783] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 614.194571] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 614.234384] usb 1-1.5: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01 [ 614.234402] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 614.234412] usb 1-1.5: Product: AX88772B [ 614.234421] usb 1-1.5: Manufacturer: ASIX Elec. Corp. [ 614.234430] usb 1-1.5: SerialNumber: 0016FE [ 614.686381] asix 1-1.5:1.0 eth1: register 'asix' at usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:8f:11:81 [ 614.811122] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 617.631319] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 617.634172] asix 1-1.5:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 652.171877] ERROR::dwc_otg_hcd_urb_enqueue:491: Not connected [ 652.252044] usb 1-1: USB disconnect, device number 44 [ 652.252061] usb 1-1.1: USB disconnect, device number 45 [ 652.252386] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet [ 652.252497] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 652.302729] usb 1-1.5: USB disconnect, device number 46 [ 652.303024] asix 1-1.5:1.0 eth1: unregister 'asix' usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet [ 659.851969] Indeed it is in host mode hprt0 = 00021501 [ 660.061910] usb 1-1: new high-speed USB device number 47 using dwc_otg [ 660.062041] Indeed it is in host mode hprt0 = 00001101 [ 660.302185] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [ 660.302200] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 660.302885] hub 1-1:1.0: USB hub found [ 660.302974] hub 1-1:1.0: 5 ports detected [ 660.621919] usb 1-1.1: new high-speed USB device number 48 using dwc_otg [ 660.752180] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [ 660.752197] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 660.755084] smsc95xx v1.0.6 [ 660.845836] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:36:1e [ 660.941988] usb 1-1.5: new high-speed USB device number 49 using dwc_otg [ 661.033038] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 661.033288] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 661.084073] usb 1-1.5: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01 [ 661.084082] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 661.084087] usb 1-1.5: Product: AX88772B [ 661.084092] usb 1-1.5: Manufacturer: ASIX Elec. Corp. [ 661.084096] usb 1-1.5: SerialNumber: 0016FE [ 661.535396] asix 1-1.5:1.0 eth1: register 'asix' at usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:8f:11:81 [ 661.613446] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 664.561469] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 664.566063] asix 1-1.5:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 694.361009] ERROR::dwc_otg_hcd_urb_enqueue:491: Not connected [ 694.502086] usb 1-1: USB disconnect, device number 47 [ 694.502103] usb 1-1.1: USB disconnect, device number 48 [ 694.502431] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet [ 694.502538] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 694.542755] usb 1-1.5: USB disconnect, device number 49 [ 694.543050] asix 1-1.5:1.0 eth1: unregister 'asix' usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet [ 701.351962] Indeed it is in host mode hprt0 = 00021501 [ 701.561914] usb 1-1: new high-speed USB device number 50 using dwc_otg [ 701.562040] Indeed it is in host mode hprt0 = 00001101 [ 701.802173] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [ 701.802189] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 701.802875] hub 1-1:1.0: USB hub found [ 701.802971] hub 1-1:1.0: 5 ports detected [ 702.121918] usb 1-1.1: new high-speed USB device number 51 using dwc_otg [ 702.252171] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [ 702.252187] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 702.255060] smsc95xx v1.0.6 [ 702.345708] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:36:1e [ 702.442031] usb 1-1.5: new high-speed USB device number 52 using dwc_otg [ 702.544037] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 702.544309] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 702.584339] usb 1-1.5: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01 [ 702.584356] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 702.584366] usb 1-1.5: Product: AX88772B [ 702.584376] usb 1-1.5: Manufacturer: ASIX Elec. Corp. [ 702.584385] usb 1-1.5: SerialNumber: 0016FE [ 703.046377] asix 1-1.5:1.0 eth1: register 'asix' at usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:8f:11:81 [ 703.175745] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 705.868492] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 705.871679] asix 1-1.5:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 740.871878] ERROR::dwc_otg_hcd_urb_enqueue:491: Not connected [ 741.002062] usb 1-1: USB disconnect, device number 50 [ 741.002079] usb 1-1.1: USB disconnect, device number 51 [ 741.002406] smsc95xx 1-1.1:1.0 eth0: unregister 'smsc95xx' usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet [ 741.002513] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 741.052759] usb 1-1.5: USB disconnect, device number 52 [ 741.053052] asix 1-1.5:1.0 eth1: unregister 'asix' usb-3f980000.usb-1.5, ASIX AX88772B USB 2.0 Ethernet --------------- END --------------------