# Web Frame Help. balenaDash

**URL:** <https://forums.balena.io/t/web-frame-help-balenadash/4571>\
**Category:** Product support\
**Tags:** raspberrypi3, balenadash\
**Created:** [November 30, 2018, 9:16pm UTC](https://forums.balena.io/t/web-frame-help-balenadash/4571 "2018-11-30T21:16:53Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Michael7117](https://avatars.discourse-cdn.com/v4/letter/m/71e660/32.png) [@Michael7117](https://forums.balena.io/u/Michael7117)\
**Post date:** [November 30, 2018, 9:16pm UTC](https://forums.balena.io/t/web-frame-help-balenadash/4571/1 "2018-11-30T21:16:53Z")

</div>

Hi,  
I’m following this tutorial: [https://www.balena.io/blog/make-a-web-frame-with-raspberry-pi-in-30-minutes/](https://www.balena.io/blog/make-a-web-frame-with-raspberry-pi-in-30-minutes/)

I have downloaded the code and am up to the step titled: Pushing the code to your device with the CLI. Whenever I try to do this step on my Windows 10 laptop, it says I do not have enough privileges to run this operation. I am running full administrator privileges. Please help! 🙂

---

<div class="post-metadata">

**Author:** ![r4space](https://avatars.discourse-cdn.com/v4/letter/r/35a633/32.png) [@r4space](https://forums.balena.io/u/r4space)\
**Post date:** [December 1, 2018, 7:57pm UTC](https://forums.balena.io/t/web-frame-help-balenadash/4571/4 "2018-12-01T19:57:26Z")

</div>

Me too except on linux

And this used to work but since cli update (which I did yesterday) now I’m getting the bash equivalent:  
You don’t have enough privileges to run this operation.  
Try running this command again prefixing it with `sudo`.

If this is not the case, and you’re trying to burn an SDCard, check that the write lock is not set.

If you need help, don’t hesitate in contacting us at:

GitHub: [https://github.com/resin-io/resin-cli/issues/new](https://github.com/resin-io/resin-cli/issues/new)  
Forums: [https://forums.resin.io](https://forums.resin.io)

---

<div class="post-metadata">

**Author:** ![zubairlk](https://sea2.discourse-cdn.com/balena/user_avatar/forums.balena.io/zubairlk/32/954_2.png) [@zubairlk](https://forums.balena.io/u/zubairlk)\
**Post date:** [December 3, 2018, 9:35am UTC](https://forums.balena.io/t/web-frame-help-balenadash/4571/18 "2018-12-03T09:35:05Z")

</div>

Hi Michael7117,

Are you running the Windows command prompt as an admin user? The default command prompt doesn’t open with Admin rights and you need to jump through a hoop to do that.  
e.g. [https://superuser.com/questions/968214/open-cmd-as-admin-with-windowsr-shortcut](https://superuser.com/questions/968214/open-cmd-as-admin-with-windowsr-shortcut)

@r4space, do you remember what the cli version was before you updated? And what the current version is that you are running. Would it be possible to run the command with `DEBUG=1` and pasting the output.

Thanks

Regards  
ZubairLK

---

<div class="post-metadata">

**Author:** ![r4space](https://avatars.discourse-cdn.com/v4/letter/r/35a633/32.png) [@r4space](https://forums.balena.io/u/r4space)\
**Post date:** [December 3, 2018, 2:20pm UTC](https://forums.balena.io/t/web-frame-help-balenadash/4571/25 "2018-12-03T14:20:45Z")

</div>

@zubairlk I realised my problem was in the container actually. Good to know that DEBUG flag, the error about permissions is rather unhelpful 😜