# says card to small

**URL:** <https://forums.balena.io/t/says-card-to-small/196469>\
**Category:** balenaEtcher\
**Created:** [October 6, 2020, 9:29am UTC](https://forums.balena.io/t/says-card-to-small/196469 "2020-10-06T09:29:07Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![xenotoca](https://avatars.discourse-cdn.com/v4/letter/x/58f4c7/32.png) [@xenotoca](https://forums.balena.io/u/xenotoca)\
**Post date:** [October 6, 2020, 9:29am UTC](https://forums.balena.io/t/says-card-to-small/196469/1 "2020-10-06T09:29:07Z")

</div>

I am getting the following pop up when etcher tells me the card is to small and I hover over the message **to small**.  
This image recommends 128GB drive, however  
\.\physicial drive 3 is only 128GB

---

<div class="post-metadata">

**Author:** ![vipulgupta2048](https://avatars.discourse-cdn.com/v4/letter/v/a183cd/32.png) [@vipulgupta2048](https://forums.balena.io/u/vipulgupta2048)\
**Post date:** [October 6, 2020, 9:54am UTC](https://forums.balena.io/t/says-card-to-small/196469/4 "2020-10-06T09:54:45Z")

</div>

Hello,  
Can you point us to the image you are trying to flash with Etcher, thanks!  
Also, do let us know the balenaEtcher version and OS you are using it on.