# Regular Crashes

**URL:** <https://forums.balena.io/t/regular-crashes/4501>\
**Category:** Product support\
**Created:** [November 25, 2018, 7:57am UTC](https://forums.balena.io/t/regular-crashes/4501 "2018-11-25T07:57:01Z")\
**Posts on this page:** 1\
**Showing post:** 29

<div class="post-metadata">

**Author:** ![bversluijs](https://sea2.discourse-cdn.com/balena/user_avatar/forums.balena.io/bversluijs/32/3954_2.png) [@bversluijs](https://forums.balena.io/u/bversluijs)\
**Post date:** [November 30, 2018, 11:33am UTC](https://forums.balena.io/t/regular-crashes/4501/29 "2018-11-30T11:33:10Z")

</div>

Hi @floion,

As I said, I’m using the Intel Atom E3940. In my dmesg, after setting `intel_idle.max_cstate`, I got the response that intel\_idle isn’t used for my processor family and model. So after much googling, I know added `processor.max_cstate=1`. That seems, and I say this carefully, to work!

I didn’t respond in this topic, because I thought `intel_idle.max_cstate=1` worked, because the system was stable for 24 hours (which was a record), and then crashed. So I wanted to test some more. Now after exactly 1 day and 21:57 hours, the system is still stable and hasn’t crashed/freezed/halted. So I think it works!

Now my grub.cfg looks like this:

```auto
# Automatically created by OE

serial --unit=0 --speed=115200 --word=8 --parity=no --stop=1

default=boot

timeout=3

menuentry 'boot'{

linux /vmlinuz root=LABEL=resin-rootA rootwait i915.enable_rc6=0 intel_idle.max_cstate=1 processor.max_cstate=1

}

```

For some detailed information:

- `i915.enable_rc6=0`  
– Fixed the problem of the screen glitching/flickering

- `intel_idle.max_cstate=1`  
– Maybe helps the Intel Pentium processors of the UP Squared board to stop halting (I didn’t test it)

- `processor.max_cstate=1`  
– Helps the Intel Atom processor of the UP Squared board to stop halting (After 2 days of idle)

So maybe it’s something to add to the default UP Board images? For now, I’ve edited the image. I’ve mounted the image, changed `grub.cfg_internal` and the `grub.cfg` in the flash EFI, just in case.

But like I said, I’ve tested it for 2 days and it’s still working and stable. But I can’t confirm that it’s a definite fix and stays stable. I’ve ordered another UP Squared with the same processor to do a test, and just install BalenaOS and let it run until it crashes (which I hope it doesn’t).

**P.S.**  
Is it an idea to create more forum categories, like “General” for feature/forum suggestions etc and “development” for people that want help with their software, specific for Balena content (like how to make the best Docker container/setup for Balena, or when something doesn’t work how a developer thinks it’s supposed to work. The community and the Balena team could help with that kind of problems)

---

_[View the full topic](https://forums.balena.io/t/regular-crashes/4501)._