# Multicontainer project that works on RPI3 fails on Fin board (avahi & supervisor interaction)

**URL:** <https://forums.balena.io/t/multicontainer-project-that-works-on-rpi3-fails-on-fin-board-avahi-supervisor-interaction/4596>\
**Category:** Product support\
**Created:** [December 4, 2018, 6:48pm UTC](https://forums.balena.io/t/multicontainer-project-that-works-on-rpi3-fails-on-fin-board-avahi-supervisor-interaction/4596 "2018-12-04T18:48:11Z")\
**Posts on this page:** 1\
**Showing post:** 107

<div class="post-metadata">

**Author:** ![janvda](https://sea2.discourse-cdn.com/balena/user_avatar/forums.balena.io/janvda/32/1271_2.png) [@janvda](https://forums.balena.io/u/janvda)\
**Post date:** [December 22, 2018, 9:57am UTC](https://forums.balena.io/t/multicontainer-project-that-works-on-rpi3-fails-on-fin-board-avahi-supervisor-interaction/4596/107 "2018-12-22T09:57:12Z")

</div>

> [@krital](#):
>
> I have rebooted the fin and the problem is occurring again, currently stuck in the restart loop. I have granted support access to the device so perhaps this would be easier because my code never gets a chance to run all I see is:  
> 12.12.18 15:49:01 (+0200) Killing service ‘signalk sha256:2b440092bb4e77941ffa4f47231aaedf0c6863d91160624e93a768d5fa77162a’  
> 12.12.18 15:49:06 (+0200) Service exited ‘signalk sha256:2b440092bb4e77941ffa4f47231aaedf0c6863d91160624e93a768d5fa77162a’  
> 12.12.18 15:49:08 (+0200) Killed service ‘signalk sha256:2b440092bb4e77941ffa4f47231aaedf0c6863d91160624e93a768d5fa77162a’  
> 12.12.18 15:49:08 (+0200) Installing service ‘signalk sha256:2b440092bb4e77941ffa4f47231aaedf0c6863d91160624e93a768d5fa77162a’  
> 12.12.18 15:49:39 (+0200) Installed service ‘signalk sha256:2b440092bb4e77941ffa4f47231aaedf0c6863d91160624e93a768d5fa77162a’  
> 12.12.18 15:49:39 (+0200) Starting service ‘signalk sha256:2b440092bb4e77941ffa4f47231aaedf0c6863d91160624e93a768d5fa77162a’  
> 12.12.18 15:49:41 (+0200) Started service ‘signalk sha256:2b440092bb4e77941ffa4f47231aaedf0c6863d91160624e93a768d5fa77162a’  
> 12.12.18 15:49:42 (+0200) Killing service ‘signalk sha256:2b440092bb4e77941ffa4f47231aaedf0c6863d91160624e93a768d5fa77162a’  
> 12.12.18 15:49:46 (+0200) Service exited ‘signalk sha256:2b440092bb4e77941ffa4f47231aaedf0c6863d91160624e93a768d5fa77162a’  
> 12.12.18 15:49:49 (+0200) Killed service ‘signalk sha256:2b440092bb4e77941ffa4f47231aaedf0c6863d91160624e93a768d5fa77162a’  
> 12.12.18 15:49:49 (+0200) Installing service ‘signalk sha256:2b440092bb4e77941ffa4f47231aaedf0c6863d91160624e93a768d5fa77162a’
> 
> Can you access it?

I have recently encountered a similar pattern of `installing starting installing stopping` with a certain container: see [Container in endless installing - starting - installing - stopping loop since upgrade from Resin Os 2.15.1+rev2 to balenaOS 2.27.0+rev1](https://forums.balena.io/t/container-in-endless-installing-starting-installing-stopping-loop-since-upgrade-from-resin-os-2-15-1-rev2-to-balenaos-2-27-0-rev1/4790)

Maybe your problem has the same root cause as mine. I have just reported my problem, so also now solution is yet known for that problem.

---

_[View the full topic](https://forums.balena.io/t/multicontainer-project-that-works-on-rpi3-fails-on-fin-board-avahi-supervisor-interaction/4596)._