# Install etcher on a raspberry pi 4

**URL:** <https://forums.balena.io/t/install-etcher-on-a-raspberry-pi-4/43465>\
**Category:** balenaEtcher\
**Created:** [November 11, 2019, 11:34pm UTC](https://forums.balena.io/t/install-etcher-on-a-raspberry-pi-4/43465 "2019-11-11T23:34:39Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![nazrhom](https://avatars.discourse-cdn.com/v4/letter/n/ee59a6/32.png) [@nazrhom](https://forums.balena.io/u/nazrhom)\
**Post date:** [November 12, 2019, 9:27am UTC](https://forums.balena.io/t/install-etcher-on-a-raspberry-pi-4/43465/7 "2019-11-12T09:27:43Z")

</div>

Makes sense, I was looking around in the forums and found this thread [Trying to build Etcher on Raspberry Pi 4](https://forums.balena.io/t/trying-to-build-etcher-on-raspberry-pi-4/40213/61) which seems to tell a very similar story up to the packaging issues. If you have time and want to give some pointers in that thread I am sure it will be very helpful for other users. Great job and thanks again for making these available for the community.

---

_[View the full topic](https://forums.balena.io/t/install-etcher-on-a-raspberry-pi-4/43465)._