# Improvements to Jetson TX1 "add new device" instructions **URL:** \ **Category:** Product support\ **Created:** [January 5, 2019, 1:16am UTC](https://forums.balena.io/t/improvements-to-jetson-tx1-add-new-device-instructions/4899 "2019-01-05T01:16:09Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![jason10](https://sea2.discourse-cdn.com/balena/user_avatar/forums.balena.io/jason10/32/1464_2.png) [@jason10](https://forums.balena.io/u/jason10)\ **Post date:** [January 5, 2019, 1:16am UTC](https://forums.balena.io/t/improvements-to-jetson-tx1-add-new-device-instructions/4899/1 "2019-01-05T01:16:09Z")
Just created a new Jetson TX1 device and install balena on it. Here are improvements to the instructions: #### Instructions 1. Use the form on the left to configure and download balenaOS for your new device.\* Write the OS file you downloaded to an SD card. We recommend using [Etcher](http://www.etcher.io/). 2. Insert the freshly burnt SD card into the Nvidia Jetson TX1. 3. **Warning!** This will also completely erase internal storage media, so please make a backup first. 4. Press and hold for 1 second the POWER push button. 5. The device is performing a shutdown. Please wait until all LEDs are off. _ **The red LED next to the fan power connector may stay on.** _ 1. Remove the resinOS installation media. 2. Remove and re-connect power to the board. 3. Your device should appear in your application dashboard within a few minutes. Have fun! ---
**Author:** ![zvin](https://avatars.discourse-cdn.com/v4/letter/z/a5b964/32.png) [@zvin](https://forums.balena.io/u/zvin)\ **Post date:** [January 7, 2019, 1:31pm UTC](https://forums.balena.io/t/improvements-to-jetson-tx1-add-new-device-instructions/4899/4 "2019-01-07T13:31:26Z")
Hello jason10. I’ve opened a pull request with the suggested changes here [https://github.com/balena-os/balena-jetson-tx1/pull/12](https://github.com/balena-os/balena-jetson-tx1/pull/12) . Thanks for the suggestion.