# Help with etcher

**URL:** <https://forums.balena.io/t/help-with-etcher/3295>\
**Category:** balenaEtcher\
**Created:** [June 7, 2018, 8:12pm UTC](https://forums.balena.io/t/help-with-etcher/3295 "2018-06-07T20:12:30Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Djp0915](https://avatars.discourse-cdn.com/v4/letter/d/bc8723/32.png) [@Djp0915](https://forums.balena.io/u/Djp0915)\
**Post date:** [June 7, 2018, 8:12pm UTC](https://forums.balena.io/t/help-with-etcher/3295/1 "2018-06-07T20:12:30Z")

</div>

I was writing kali Linux my to my micro SD card and my power went out. Next thing when it’s back on I turn my pc back on. After looking to go write again to my as card, it seems to have been left in an unusable state. Is there a way I can fix this?

---

<div class="post-metadata">

**Author:** ![jhermsmeier](https://avatars.discourse-cdn.com/v4/letter/j/f4b2a3/32.png) [@jhermsmeier](https://forums.balena.io/u/jhermsmeier)\
**Post date:** [June 11, 2018, 6:25pm UTC](https://forums.balena.io/t/help-with-etcher/3295/2 "2018-06-11T18:25:51Z")

</div>

You’ll want to try the relevant instructions from the [“Recovering broken drives”](https://github.com/resin-io/etcher/blob/master/docs/USER-DOCUMENTATION.md#recovering-broken-drives) section in the docs; that should normally sort it out.
