# Flashing Jetson Nano with USB

**URL:** <https://forums.balena.io/t/flashing-jetson-nano-with-usb/177085>\
**Category:** Product support\
**Created:** [August 24, 2020, 11:56am UTC](https://forums.balena.io/t/flashing-jetson-nano-with-usb/177085 "2020-08-24T11:56:41Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![thibault](https://avatars.discourse-cdn.com/v4/letter/t/9fc29f/32.png) [@thibault](https://forums.balena.io/u/thibault)\
**Post date:** [August 24, 2020, 11:56am UTC](https://forums.balena.io/t/flashing-jetson-nano-with-usb/177085/1 "2020-08-24T11:56:41Z")

</div>

Hi,

I was pushing my dockerfile with files from the jetpack for my jetson nano. Then my jetson started to process. Suddenly, my sd card has been ejected because the slot broke. I wanted to know if you have another way to flash my jetson nano with USB please?

Thanks

---

<div class="post-metadata">

**Author:** ![rcooke-warwick](https://avatars.discourse-cdn.com/v4/letter/r/ba9def/32.png) [@rcooke-warwick](https://forums.balena.io/u/rcooke-warwick)\
**Post date:** [August 24, 2020, 2:07pm UTC](https://forums.balena.io/t/flashing-jetson-nano-with-usb/177085/4 "2020-08-24T14:07:56Z")

</div>

Hi there. It may be possible to hack something together, (e.g [https://www.jetsonhacks.com/2019/04/25/jetson-nano-run-on-usb-drive/](https://www.jetsonhacks.com/2019/04/25/jetson-nano-run-on-usb-drive/)), but to be honest I would recommend you try to simply get the SD card slot repaired if possible. Hacking an alternative might not be reliable.

---

<div class="post-metadata">

**Author:** ![thibault](https://avatars.discourse-cdn.com/v4/letter/t/9fc29f/32.png) [@thibault](https://forums.balena.io/u/thibault)\
**Post date:** [August 24, 2020, 2:20pm UTC](https://forums.balena.io/t/flashing-jetson-nano-with-usb/177085/6 "2020-08-24T14:20:17Z")

</div>

Ok thanks for the reply, but is it possible by this way too:

> **[balena-os/jetson-flash](https://github.com/balena-os/jetson-flash)**
>
> This tool allows users to flash ResinOS on Jetson supported devices - balena-os/jetson-flash

---

<div class="post-metadata">

**Author:** ![rcooke-warwick](https://avatars.discourse-cdn.com/v4/letter/r/ba9def/32.png) [@rcooke-warwick](https://forums.balena.io/u/rcooke-warwick)\
**Post date:** [August 24, 2020, 2:56pm UTC](https://forums.balena.io/t/flashing-jetson-nano-with-usb/177085/7 "2020-08-24T14:56:58Z")

</div>

Are you using the Jetson nano development board? ([https://developer.nvidia.com/embedded/jetson-nano-developer-kit](https://developer.nvidia.com/embedded/jetson-nano-developer-kit)). If so, then this board needs the SD card for storage and to boot. There is also a system on module board for the Jetson nano that has built in eMMC instead of using an SD card. However if you are using the regular dev board, then the SD card will be needed.

I’m not sure about the repo you linked. I’m guessing that this tool can be used to flash the eMMC of the system on module board, or it can flash the SD card on the dev board while its in the SD slot, instead of having to put the SD card in some sort of USB adapter.

---

<div class="post-metadata">

**Author:** ![thibault](https://avatars.discourse-cdn.com/v4/letter/t/9fc29f/32.png) [@thibault](https://forums.balena.io/u/thibault)\
**Post date:** [August 24, 2020, 3:42pm UTC](https://forums.balena.io/t/flashing-jetson-nano-with-usb/177085/9 "2020-08-24T15:42:03Z")

</div>

Yes, I’m using the jetson-nano-developer-kit

---

<div class="post-metadata">

**Author:** ![rcooke-warwick](https://avatars.discourse-cdn.com/v4/letter/r/ba9def/32.png) [@rcooke-warwick](https://forums.balena.io/u/rcooke-warwick)\
**Post date:** [August 24, 2020, 3:46pm UTC](https://forums.balena.io/t/flashing-jetson-nano-with-usb/177085/10 "2020-08-24T15:46:48Z")

</div>

In that case, if the SD card won’t go into the SD card slot, the tool you linked will not make the board work - repair is the best option
