# Fin HomeAssistant Device Offline

**URL:** <https://forums.balena.io/t/fin-homeassistant-device-offline/349847>\
**Category:** balenaFin\
**Created:** [October 25, 2021, 12:46am UTC](https://forums.balena.io/t/fin-homeassistant-device-offline/349847 "2021-10-25T00:46:52Z")\
**Posts on this page:** 2\
**Page:** 2

<div class="post-metadata">

**Author:** ![SnoWake](https://sea2.discourse-cdn.com/balena/user_avatar/forums.balena.io/snowake/32/5042_2.png) [@SnoWake](https://forums.balena.io/u/SnoWake)\
**Post date:** [November 30, 2021, 5:14am UTC](https://forums.balena.io/t/fin-homeassistant-device-offline/349847/25 "2021-11-30T05:14:15Z")

</div>

Thanks for all the responses - AND the heads up about the API outages. I had another ‘fleet’ with a single device (running Balena Sense) - and it was experiencing the same, intermittent ‘online’ reporting - even after I completely overhauled my entire network topology, VLANs, SSIDs, networks and firewalls to _ensure_ I wasn’t somehow getting in the way of traffic flows, all of a sudden, and not realizing it. This does **not** seem to be the case, near as I can tell.

Thanks in advance for any #ProTips, other logs I can check, commands / diagnostics I can run, etc.

Peace.

---

<div class="post-metadata">

**Author:** ![alanb128](https://sea2.discourse-cdn.com/balena/user_avatar/forums.balena.io/alanb128/32/2839_2.png) [@alanb128](https://forums.balena.io/u/alanb128)\
**Post date:** [December 7, 2021, 4:47am UTC](https://forums.balena.io/t/fin-homeassistant-device-offline/349847/26 "2021-12-07T04:47:35Z")

</div>

Hello @snowake, are you still experiencing offline periods with your balenaFin setup? Have you had a chance to try an ethernet connection to rule out WiFi issues? To “get the config out of the device” you would want to back up the `configuration.yaml` file and any other `.yaml` files referenced in that file, usually stored in the same folder. This is likely on a persistent volume defined in your docker-compose file. I believe you can use the Home Assistant UI to remove ZigBee / ZWave devices but it may depend on your version. Any method described in the Home Assistant documentation or forums should be applicable though to your setup on the Fin.

[Previous page](https://forums.balena.io/t/fin-homeassistant-device-offline/349847.md?page=1)
