# CMD Support in BalenaEtcher

**URL:** <https://forums.balena.io/t/cmd-support-in-balenaetcher/17373>\
**Category:** balenaEtcher\
**Created:** [June 29, 2019, 5:28pm UTC](https://forums.balena.io/t/cmd-support-in-balenaetcher/17373 "2019-06-29T17:28:46Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Gotard](https://avatars.discourse-cdn.com/v4/letter/g/9de053/32.png) [@Gotard](https://forums.balena.io/u/Gotard)\
**Post date:** [June 29, 2019, 5:28pm UTC](https://forums.balena.io/t/cmd-support-in-balenaetcher/17373/1 "2019-06-29T17:28:46Z")

</div>

Hello, I’d like to ask, if it is possible to include Windows CMD support in BalenaEtcher?  
I am creating a project that essentially needs Etcher as a flashing engine, but I want to automate the file and disk selection process, so it would be great if etcher supported CMD, so that I could push commands through CMD.

---

<div class="post-metadata">

**Author:** ![mikesimos](https://sea2.discourse-cdn.com/balena/user_avatar/forums.balena.io/mikesimos/32/1418_2.png) [@mikesimos](https://forums.balena.io/u/mikesimos)\
**Post date:** [July 1, 2019, 8:21am UTC](https://forums.balena.io/t/cmd-support-in-balenaetcher/17373/2 "2019-07-01T08:21:36Z")

</div>

Hey there!  
It sounds you can probably use [https://github.com/balena-io-modules/etcher-sdk](https://github.com/balena-io-modules/etcher-sdk) for that. But @thundron @zvin may have some recommendations for you here. Cheers!